1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WNDR3700v5
    5. /
  5. 18
Page 86 / 161 Scroll up to view Page 81 - 85
Share a USB Printer
86
N600 WiFi Dual Band Gigabit Router
After the InstallShield Wizard completes the installation, the NETGEAR USB Control
Center prompts you to select a language.
3.
Select a language from the menu and click the
OK
button.
Some firewall software, such as Comodo, blocks NETGEAR USB Control Center from
accessing the USB printer. If you do not see the USB printer displayed in the screen, you
can disable the firewall temporarily to allow the utility to work.
4.
Select the printer and click the
Connect
button.
The printer status changes to Manually connected by
Mycomputer
. Now only your
computer can use the printer.
5.
Click the
Disconnect
button.
The status changes to Available. Now all computers on the network can use the printer.
6.
To exit the utility, select
System > Exit
.
Use the Shared Printer
For each computer, after you click the
Connect
and
Disconnect
buttons once, the utility
automatically manages the printing queue. By default, the utility starts automatically
whenever you log on to Windows and runs in the background.
Page 87 / 161
Share a USB Printer
87
N600 WiFi Dual Band Gigabit Router
To manually connect and print:
1.
Click the
NETGEAR USB Control Center
icon
.
The main screen displays.
2.
Click the
Connect
button.
The printer status changes to Manually connected by
Mycomputer
. Now only the
computer that you are using can use this printer.
3.
Use the print feature in your application to print your document.
4.
To release the printer so that all computers on the network can use it, click the
Disconnect
button.
To print and release the printer to any computer on the network:
1.
To print your document, use the print feature in your application.
The NETGEAR USB Control Center automatically connects your computer to the USB
printer and prints the document. If another computer is already connected to the printer,
your print job goes into a queue to wait to be printed.
2.
If your document does not print, use the NETGEAR USB Control Center to check the status.
See
View or Change the Status of a Printer
on page
87.
View or Change the Status of a Printer
To view or change the status:
1.
Click the
NETGEAR USB Control Center
icon
.
The Status column shows the status for each device:
•
Available
. No print jobs are in progress. You can use the USB printer from any
computer in the network.
•
Connected
. Your computer is connected to the printer and will be released when
your print job is done.
•
Manually Connected by
. Only the connected computer can use the printer.
•
Waiting to Connect
. Your computer is not connected to the shared printer yet.
2.
To print from your computer when the status shows Manually connected by
another
computer
, click the
Disconnect
button.
The printer is released from the connection and the status changes to Available.
Page 88 / 161
Share a USB Printer
88
N600 WiFi Dual Band Gigabit Router
3.
To print from your computer when the status shows Waiting to Connect:
a.
Click the
Connect
button.
The printer status changes to Manually connected by
Mycomputer
. Now only your
computer can use the printer.
b.
To allow the printer to be shared, click the
Disconnect
button.
The printer is released from the connection and the status changes to Available.
Use the Scan Feature of a Multifunction USB Printer
If your USB printer supports scanning, you can also use the USB printer for scanning. For
example, the USB printer displayed in the Windows Printers and Faxes window is ready for
print jobs.
To use the scan feature of a multifunction USB printer:
1.
Click the
NETGEAR USB Control Center
icon
.
2.
Make sure that the printer status shows as Available.
Page 89 / 161
Share a USB Printer
89
N600 WiFi Dual Band Gigabit Router
3.
Click the
Network Scanner
button.
The scanner screen displays so that you can use the USB printer for scanning.
Change NETGEAR USB Control Center Settings
You can stop the NETGEAR USB Control Center from starting automatically when you log in
to Windows. You can also change the language and specify the time-out to release the
printer connection.
To turn off automatic NETGEAR USB Control Center startup:
1.
Click the
NETGEAR USB Control Center
icon
.
Page 90 / 161
Share a USB Printer
90
N600 WiFi Dual Band Gigabit Router
2.
Select
Tools > Configuration
.
3.
Clear the
Automatically execute when logging on Windows
check box.
4.
Click the
OK
button.
Your change is saved.
Change the NETGEAR USB Control Center Language
To change the language:
1.
Click the
NETGEAR USB Control Center
icon
.
The main screen displays.
2.
Select
Tools > Configuration
.
The Control Center - Configuration screen displays.
3.
In the
Language
menu, select a language.
4.
Click the
OK
button.
The next time NETGEAR USB Control Center starts, the language changes.
Specify the Time-Out
To specify the time-out:
1.
Click the
NETGEAR USB Control Center
icon
.
The main screen displays.
2.
Select
Tools > Configuration
.
The Control Center - Configuration screen displays.

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top