Page 26 / 148 Scroll up to view Page 21 - 25
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
3-4
Configuring the Internet and Wireless Settings
202-10090-01, April 2005
3.
Click OK and the resulting window below appears:
Figure 3-4:
Login result
Page 27 / 148
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Configuring the Internet and Wireless Settings
3-5
202-10090-01, April 2005
4.
Enable the Firmware Upgrade Assistant if you want the router to check for the lastest
firmware everytime you log into the router (otherwise, you can check yourself manually; see
“Upgrading the Router Software” on page 5-5
).
Figure 3-5:
Firmware Upgrade Assistant popup and screen
Page 28 / 148
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
3-6
Configuring the Internet and Wireless Settings
202-10090-01, April 2005
Changing Your Configuration
You can change your Internet and wireless settings after they have been configured by the Smart
Wizard Configuration Assistant.
Internet Settings
To change the Internet settings, click Basic Settings on the left menu bar. One of the following
screens appears:
Figure 3-6:
Basic Settings screens
The Basic Settings pages allow you to configure, upgrade and check the status of your NETGEAR
Wireless Router.
Basic Settings, No Login
Basic Settings, Login Required
Page 29 / 148
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Configuring the Internet and Wireless Settings
3-7
202-10090-01, April 2005
Click an item in the leftmost column. The current settings or information for that area appear in the
center column.
Helpful information related to the selected Settings page appears in this column. If you are using
Internet Explorer, you may click an item in the center column to jump directly to the related help
section; otherwise, scroll down until you reach it.
For the most current documentation, go to:
Note
: If you are setting up the router for the first time, the default settings may work for you with
no changes.
Does Your Internet Connection Require A Login?
: Select this option based on the type of
account you have with your ISP. If you need to enter login information every time you connect
to the Internet or you have a PPPoE account with your ISP, select Yes. Otherwise, select No.
Note: If you have installed PPP software such as WinPoET (from Earthlink) or Enternet (from
PacBell), then you have PPPoE. Select Yes. After selecting Yes and configuring your router,
you will not need to run the PPP software on your PC to connect to the Internet.
Internet Service Provider
: Select the service provided by your ISP. "Other" (PPPoE) is the
most common. "PPTP" is used in Austria and other European countries. "Telstra BigPond" is
for Australia only.
Login
: This is usually the name that you use in your e-mail address. For example, if your
main mail account is [email protected], then put JerAB in this box.
Some ISPs (like Mindspring, Earthlink, and T-DSL) require that you use your full e-mail
address when you log in. If your ISP requires your full e-mail address, then type it in the
Login box.
Password
: Type the password that you use to log in to your ISP.
Service Name
: If your ISP provided a Service Name, enter it here. Otherwise, this may be
left blank.
Idle Timeout
: An idle Internet connection will be terminated after this time period.
If this value is zero (0), then the connection will be "kept alive" by re-connecting
immediately whenever the connection is lost.
Internet IP Address
: If you log in to your service or your ISP did not provide you with a
fixed IP address, the router will find an IP address for you automatically when you connect.
Select Get dynamically from ISP.
Page 30 / 148
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
3-8
Configuring the Internet and Wireless Settings
202-10090-01, April 2005
If you have a fixed (static, permanent) IP address, your ISP will have provided you with an IP
address. Select Use static IP address and type in the IP Address.
Account Name
(also known as Host Name or System Name): For most users, type your
account name or user name in this box. For example, if your main mail account is
[email protected], then put JerAB in this box.
If your ISP has given you a specific Host name, then type it (for example, CCA7324-A).
Domain Name
: For most users, you may leave this box blank, unless required by your ISP.
You may type the domain name of your ISP. For example, if your ISP's mail server is
mail.xxx.yyy.zzz, you would type xxx.yyy.zzz as the Domain Name.
If you have a Domain name given to you by your ISP, type it in this box. (For example,
Earthlink Cable may require a Host name of 'home' and Comcast sometimes supplies a
Domain name.)
If you have a cable modem, this is usually the Workgroup name.
Internet IP Address
: If you log in to your service or your ISP did not provide you with a
fixed IP address, the router will find an IP address for you automatically when you connect.
Select Get Dynamically From ISP.
If you have a fixed (or static IP) address, your ISP will have provided you with the required
information. Select Use Static IP Address and type the IP Address, Subnet Mask and Gateway
IP Address into the correct boxes.
For example:
IP Address: 24.218.156.183
Subnet Mask: 255.255.255.0
Gateway IP Address: 24.218.156.1
Domain Name Server (DNS) Address
: The DNS server is used to look up site addresses
based on their names.
If your ISP gave you one or two DNS addresses, select Use These DNS Servers and type the
primary and secondary addresses.
Otherwise, select Get Automatically From ISP.
Note
: If you get 'Address not found' errors when you go to a Web site, it is likely that your
DNS servers aren't set up properly. You should contact your ISP to get DNS server addresses.
Router MAC Address
: Your computer's local address is its unique address on your network.
This is also referred to as the computer's MAC (Media Access Control) address.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top