1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WGT624
    5. /
  5. 9
Page 41 / 148 Scroll up to view Page 36 - 40
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Content Filtering
4-7
202-10090-01, April 2005
Figure 4-6:
Logs menu
Log entries are described in
Table 4-1
Table 4-1.
Log entry descriptions
Field
Description
Number
The index number of the content filter log entries. 128 entries
are available numbered from 0 to 127. The log will keep the
record of the latest 128 entries.
Date and Time
The date and time the log entry was recorded.
Source IP
The IP address of the initiating device for this log entry.
Action
This field displays whether the access was blocked or allowed.
The name or IP address of the website or newsgroup visited or
attempted to access.
Page 42 / 148
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
4-8
Content Filtering
202-10090-01, April 2005
Log action buttons are described in
Table 4-2
Table 4-2.
Log action buttons
Field
Description
Refresh
Click this button to refresh the log screen.
Clear Log
Click this button to clear the log entries.
Send Log
Click this button to email the log immediately.
Page 43 / 148
Maintenance
5-1
202-10090-01, April 2005
Chapter 5
Maintenance
This chapter describes how to use the maintenance features of your WGT624 v3 108 Mbps
Wireless Firewall Router. These features can be found by clicking on the Maintenance heading in
the Main Menu of the browser interface.
Viewing Wireless Router Status Information
The Router Status menu provides a limited amount of status and usage information. From the
Main Menu of the browser interface, click on Maintenance, then select System Status to view the
System Status screen, shown below.
Figure 5-1:
Router Status screen
Page 44 / 148
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
5-2
Maintenance
202-10090-01, April 2005
This screen shows the following parameters:
Table 5-1.
Menu 3.2 - Wireless Router Status Fields
Field
Description
Account Name
This field displays the Host Name assigned to the router.
Firmware Version
This field displays the router firmware version.
Internet Port
These parameters apply to the Internet (WAN) port of the router.
MAC Address
This field displays the Media Access Control address being used by the
Internet (WAN) port of the router.
IP Address
This field displays the IP address being used by the Internet (WAN) port
of the router. If no address is shown, the router cannot connect to the
Internet.
IP Subnet Mask
This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the router.
DHCP
If set to None, the router is configured to use a fixed IP address on the
WAN.
If set to Client, the router is configured to obtain an IP address
dynamically from the ISP.
LAN Port
These parameters apply to the Local (WAN) port of the router.
MAC Address
This field displays the Media Access Control address being used by the
LAN port of the router.
IP Address
This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.1.1.
DHCP
Identifies if the router’s built-in DHCP server is active for the LAN
attached devices.
IP Subnet Mask
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0
Wireless Port
These parameters apply to the Wireless port of the router.
MAC Address
This field displays the Media Access Control address being used by the
Wireless port of the router.
Name (SSID)
This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is NETGEAR.
Region
This field displays the geographic region where the router being used. It
may be illegal to use the wireless features of the router in some parts of
the world.
Channel
Identifies if the channel the wireless port is using. See
“Wireless
Channels” on page D-7
for the frequencies used on each channel.
Page 45 / 148
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Maintenance
5-3
202-10090-01, April 2005
Click on the “Show WAN Status” button to display the WAN status, as shown below.
Figure 5-2:
Connection Status screen
This screen shows the following statistics:.
WAN Status action buttons are described in
Table 5-2
Table 5-1.
Connection Status Fields
Field
Description
Connection Time
The length of time the router has been connected to your Internet service provider’s
network.
Connection Method
The method used to obtain an IP address from your Internet service provider.
IP Address
The WAN (Internet) IP Address assigned to the router.
Network Mask
The WAN (Internet) Subnet Mask assigned to the router.
Default Gateway
The WAN (Internet) default gateway the router communicates with.
Table 5-2.
Show WAN Status action buttons
Field
Description
Renew
Click the Renew button to renew the DHCP lease.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top