1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WGR614v7
    5. /
  5. 5
Page 21 / 154 Scroll up to view Page 16 - 20
54 Mbps Wireless Router WGR614v7 Reference Manual
Introduction
2-7
April 2006
The Router’s Rear Panel
The rear panel of the WGR614v7 router contains the items listed below.
Figure 1-2: WGR614v7 Rear Panel
Viewed from left to right, the rear panel contains the following features:
•
AC power adapter outlet for
12 V DC @ 1A output, 22W maximum
•
Four Local (LAN) 10/100 Mbps Ethernet ports for connecting the router to the local
computers
•
Internet (WAN) Ethernet port for connecting the router to a cable or DSL modem
•
Factory Default Reset push button for
Restoring the Default Configuration and Password
•
Wireless antenna
Power
4 LAN Ports
Internet Port
Reset
Wireless
4
3
2
1
Antenna
Button
Page 22 / 154
54 Mbps Wireless Router WGR614v7 Reference Manual
2-8
Introduction
April 2006
Page 23 / 154
Configuring the Internet and Wireless Settings
3-1
April 2006
Chapter 3
Configuring the Internet and Wireless Settings
This chapter describes how to use the Smart Wizard Installation Assistant on the Resource CD to
configure your wireless router’s Internet connection and wireless parameters.
Once you are connected to the Internet and your wireless connections are working, you can also
configure the router’s content filtering parameters if you need to change the default settings. See
Chapter 4, “Content Filtering
.
If you are an advanced user, you can also configure maintenance (see
Chapter 5, “Maintenance
)
and advanced (see
Chapter 6, “Advanced Configuration of the Router
) settings if you need to
change the factory defaults.
Initial Configuration
1.
Insert the Resource CD into the CD drive on your PC.
2.
Click Setup and follow the instructions. The Smart Wizard Installation Assistant will guide
you through the setup process:
•
How to change your cabling.
•
How to connect to the Internet.
•
How to configure your wireless settings.
If you want to change your Internet or wireless settings later, see
“Changing Your
Configuration” on page 3-4
.
Note:
Do not change your existing Internet connection. Instead, let the Smart Wizard
Installation Assistant on the Resource CD guide you through the setup process.
Page 24 / 154
54 Mbps Wireless Router WGR614v7 Reference Manual
3-2
Configuring the Internet and Wireless Settings
April 2006
Logging Into Your Router
To log into your router after you have configured your router, do the following:
1.
Type
in the address field of Internet Explorer or Netscape®
Navigator.
Figure 3-1:
Log in to the router
2.
When prompted, enter
admin
for the router user name and
password
for the router password,
both in lower case letters (or enter the password you chose if you changed it during the setup
in
“Initial Configuration” on page 3-1
).
Note:
The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
A login window like the one shown below opens:
Figure 3-2:
Login window
Page 25 / 154
54 Mbps Wireless Router WGR614v7 Reference Manual
Configuring the Internet and Wireless Settings
3-3
April 2006
3.
Click OK and the resulting window below appears:
Figure 3-3:
Login result

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top