NETGEAR WGR614v6 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

NETGEAR

WGR614v6

Page 151 / 154 Scroll up to view Page 146 - 150

Reference Manual for the 54 Mbps Wireless Router WGR614 v6

Glossary

-11

202-10099-01, April 2005

For example, when a web page is downloaded from a web server, the TCP program layer in that server

divides the file into packets, numbers the packets, and then forwards them individually to the IP program

layer. Although each packet has the same destination IP address, it may get routed differently through the

network. At the other end, TCP reassembles the individual packets and waits until they have all arrived to

forward them as a single file.

TCP/IP

The underlying technology behind the Internet and communications between computers in a network. The

first part, TCP, is the transport part, which matches the size of the messages on either end and guarantees that

the correct message has been received. The IP part is the user's computer address on a network. Every

computer in a TCP/IP network has its own IP address that is either dynamically assigned at startup or

permanently assigned. All TCP/IP messages contain the address of the destination network as well as the

address of the destination station. This enables TCP/IP messages to be transmitted to multiple networks

(subnets) within an organization or worldwide.

TKIP

A security feature that is a WEP enhancement: Temporal Key Integrity Protocol and Message Integrity

Check (MIC) is a modification of WEP to defend against known attacks (WEP+ four patches for key

mixing, message integrity, rekeying, initialization vector protection)

Universal Plug and Play (UPnP)

UPnP helps devices, such as Internet appliances and computers, access the network and connect to other

devices as needed. UPnP devices can automatically discover the services from other registered UPnP

devices on the network.

USB (Universal Serial Bus)

A high-speed bidirectional serial connection between a PC and a peripheral that transmits data at the rate of

12 megabits per second. The new USB 2.0 specification provides a data rate of up to 480 Mbps, compared to

standard USB at only 12 Mbps. 1394, FireWire and iLink all provide a bandwidth of up to 400 Mbps.

VoIP (Voice over IP)

Voice transmission using Internet Protocol to create digital packets distributed over the Internet. VoIP can be

less expensive than voice transmission using standard analog packets over POTS (Plain Old Telephone

Service).

VPN (Virtual Private Network)

A type of technology designed to increase the security of information transferred over the Internet. VPN can

work with either wired or wireless networks, as well as with dial-up connections over POTS. VPN creates a

private encrypted tunnel from the end user's computer, through the local wireless network, through the

Internet, all the way to the corporate servers and database.

War Chalking

The act of making chalk marks on outdoor surfaces (walls, sidewalks, buildings, sign posts, trees) to indicate

the existence of an open wireless network connection, usually offering an Internet connection so that others

Page 152 / 154

Reference Manual for the 54 Mbps Wireless Router WGR614 v6

-12

Glossary

202-10099-01, April 2005

can benefit from the free wireless access. The open connections typically come from the access points of

wireless networks located within buildings to serve enterprises. The chalk symbols indicate the type of

access point that is available at that specific spot.

There are three basic designs that are currently used: a pair of back-to-back semicircles, which denotes an

open node; a closed circle, which denotes a closed node; a closed circle with a “W” inside, which denotes a

node equipped with WEP. Warchalkers also draw identifiers above the symbols to indicate the password that

can be used to access the node, which can easily be obtained with sniffer software.

As a recent development, the debate over the legality of warchalking is still going on.

The practice stems from the U.S. Depression-era culture of wandering hobos who would make marks

outside of homes to indicate to other wanderers whether the home was receptive to drifters or was

inhospitable.

War Driving

War driving is the act of locating and possibly exploiting connections to wireless local area networks while

driving around a city or elsewhere. To do war driving, you need a vehicle, a computer (which can be a

laptop), a wireless Ethernet card set to work in promiscuous mode, and some kind of an antenna which can

be mounted on top of or positioned inside the car. Because a wireless LAN may have a range that extends

beyond an office building, an outside user may be able to intrude into the network, obtain a free Internet

connection, and possibly gain access to company records and other resources.

Some people have made a sport out of war driving, in part to demonstrate the ease with which wireless

LANs can be compromised. With an omnidirectional antenna and a geophysical positioning system (GPS),

the war driver can systematically map the locations of 802.11b wireless access points.

WEP (Wired Equivalent Privacy)

Basic wireless security provided by Wi-Fi. In some instances, WEP may be all a home or small-business

user needs to protect wireless data. WEP is available in 40-bit (also called 64-bit), or in 108-bit (also called

128-bit) encryption modes. As 108-bit encryption provides a longer algorithm that takes longer to decode, it

can provide better security than basic 40-bit (64-bit) encryption.

Wi-Fi (Wireless Fidelity)

Another name for IEEE 802.11b. Products certified as Wi-Fi are interoperable with each other even if they

are from different manufacturers. A user with a Wi-Fi product can use any brand of access point with any

other brand of client hardware that is built to the Wi-Fi standard.

Wi-Fi Alliance (formerly WECA – Wireless Ethernet Compatibility Alliance)

The Wi-Fi Alliance is a nonprofit international association formed in 1999 to certify interoperability of

wireless Local Area Network products based on IEEE 802.11 specification. Currently the Wi-Fi Alliance

has 193 member companies from around the world, and 509 products have received Wi-Fi certification since

certification began in March of 2000. The goal of the Wi-Fi Alliance's members is to enhance the user

experience through product interoperability (

www.weca.net

Page 153 / 154

Reference Manual for the 54 Mbps Wireless Router WGR614 v6

Glossary

-13

202-10099-01, April 2005

Wi-Fi Protected Access (WPA)

WPA is a security technology for wireless networks that improves on the authentication and encryption

features of WEP (Wired Equivalent Privacy). In fact, WPA was developed by the networking industry in

response to the shortcomings of WEP.

One of the key technologies behind WPA is the Temporal Key Integrity Protocol (TKIP). TKIP addresses

the encryption weaknesses of WEP. Another key component of WPA is built-in authentication that WEP

does not offer. With this feature, WPA provides roughly comparable security to VPN tunneling with WEP,

with the benefit of easier administration and use. This is similar to 802.1x support and requires a RADIUS

server in order to implement. The Wi-Fi Alliance will call this, 'WPA-Enterprise.'

One variation of WPA is called WPA Pre Shared Key or WPA-PSK for short - this provides an

authentication alternative to an expensive RADIUS server. WPA-PSK is a simplified but still powerful form

of WPA most suitable for home Wi-Fi networking. To use WPA-PSK, a person sets a static key or

"passphrase" as with WEP. But, using TKIP, WPA-PSK automatically changes the keys at a preset time

interval, making it much more difficult for hackers to find and exploit them. The Wi-Fi Alliance will call

this, 'WPA-Personal.'

Wi-Fi Protected Access and IEEE 802.11i Comparison

Wi-Fi Protected Access will be forward-compatible with the IEEE 802.11i security specification currently

under development by the IEEE. Wi-Fi Protected Access is a subset of the current 802.11i draft, taking

certain pieces of the 802.11i draft that are ready to bring to market today, such as its implementation of

802.1x and TKIP. These features can also be enabled on most existing Wi-Fi CERTIFIED products as a

software upgrade. The main pieces of the 802.11i draft that are not included in Wi-Fi Protected Access are

secure IBSS, secure fast handoff, secure de-authentication and disassociation, as well as enhanced

encryption protocols such as AES-CCMP. These features are either not yet ready for market or will require

hardware upgrades to implement.

Wi-Fi Protected Access for the Enterprise

Wi-Fi Protected Access effectively addresses the WLAN security requirements for the enterprise and

provides a strong encryption and authentication solution prior to the ratification of the IEEE 802.11i

standard. In an enterprise with IT resources, Wi-Fi Protected Access should be used in conjunction with an

authentication server such as RADIUS to provide centralized access control and management. With this

implementation in place, the need for add-on solutions such as VPNs may be eliminated, at least for the

express purpose of securing the wireless link in a network.

Wi-Fi Protected Access for Home/SOHO

In a home or Small Office/ Home Office (SOHO) environment, where there are no central authentication

servers or EAP framework, Wi-Fi Protected Access runs in a special home mode. This mode, also called

Pre-Shared Key (PSK), allows the use of manually-entered keys or passwords and is designed to be easy to

set up for the home user. All the home user needs to do is enter a password (also called a master key) in their

access point or home wireless gateway and each PC that is on the Wi-Fi wireless network. Wi-Fi Protected

Access takes over automatically from that point. First, the password allows only devices with a matching

password to join the network, which keeps out eavesdroppers and other unauthorized users. Second, the

password automatically kicks off the TKIP encryption process, described above.

Page 154 / 154

Reference Manual for the 54 Mbps Wireless Router WGR614 v6

-14

Glossary

202-10099-01, April 2005

Wi-Fi Protected Access for Public Access

The intrinsic encryption and authentication schemes defined in Wi-Fi Protected Access may also prove

useful for Wireless Internet Service Providers (WISPs) offering Wi-Fi public access in "hot spots" where

secure transmission and authentication is particularly important to users unknown to each other. The

authentication capability defined in the specification enables a secure access control mechanism for the

service providers and for mobile users not utilizing VPN connections.

Wi-Fi Protected Access in "Mixed Mode" Deployment

In a large network with many clients, a likely scenario is that access points will be upgraded before all the

Wi-Fi clients. Some access points may operate in a "mixed mode", which supports both clients running

Wi-Fi Protected Access and clients running original WEP security. While useful for transition, the net effect

of supporting both types of client devices is that security will operate at the less secure level (WEP),

common to all the devices. Therefore, organizations will benefit by accelerating the move to Wi-Fi Protected

Access for all Wi-Fi clients and access points.

WiMAX

An IEEE 802.16 Task Group that provides a specification for fixed broadband wireless access systems

employing a point-to-multipoint (PMP) architecture. Task Group 1 of IEEE 802.16 developed a

point-to-multipoint broadband wireless access standard for systems in the frequency range 10-66 GHz. The

standard covers both the Media Access Control (MAC) and the physical (PHY) layers. Ratification is

expected in second half of 2004.

Wireless Multimedia (WMM)

WMM (Wireless Multimedia) is a subset of the 802.11e standard. WMM allows wireless traffic to have a

range of priorities, depending on the kind of data. Time-dependent information, like video, audio, or voice

will have a higher priority than normal traffic. For WMM to function correctly, wireless clients must also

support WMM.

Wireless Networking

Wireless Networking refers to the infrastructure enabling the transmission of wireless signals. A network

ties things together and enables resource sharing.

WLAN (Wireless LAN)

Also referred to as LAN. A type of local-area network that uses wireless or high-frequency radio waves

rather than wires to communicate between nodes.

Rate

Popular NETGEAR Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share