1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WGR614v2
    5. /
  5. 4
Page 16 / 146 Scroll up to view Page 11 - 15
Reference Manual for Cable/DSL Wireless Router WGR614
1-4
Introduction
•
Automatic Configuration of Attached PCs by DHCP
The WGR614 router dynamically assigns network configuration information, including
IP, gateway, and domain name server (DNS) addresses, to attached PCs on the LAN using the
Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies configuration
of PCs on your local network.
•
DNS Proxy
When DHCP is enabled and no DNS addresses are specified, the router provides its own
address as a DNS server to the attached PCs. The router obtains actual DNS addresses from
the ISP during connection setup and forwards DNS requests from the LAN.
•
PPP over Ethernet (PPPoE)
PPPoE is a protocol for connecting remote hosts to the Internet over a DSL connection by
simulating a dial-up connection. This feature eliminates the need to run a login program such
as Entersys or WinPOET on your PC.
Easy Installation and Management
You can install, configure, and operate the Model WGR614 Cable/DSL Wireless Router within
minutes after connecting it to the network. The following features simplify installation and
management tasks:
•
Browser-based management
Browser-based configuration allows you to easily configure your router from almost any type
of personal computer, such as Windows, Macintosh, or Linux. A user-friendly Setup Wizard is
provided and online help documentation is built into the browser-based Web Management
Interface.
•
Smart Wizard
TM
The WGR614 router Smart Wizard automatically senses the type of Internet connection,
asking you only for the information required for your type of ISP account.
•
Visual monitoring
The WGR614 router’s front panel LEDs provide an easy way to monitor its status and activity.
Maintenance and Support
NETGEAR offers the following features to help you maximize your use of the WGR614 router:
•
Flash memory for firmware upgrade
•
Free technical support seven days a week, twenty-four hours a day
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 146
Reference Manual for Cable/DSL Wireless Router WGR614
Introduction
1-5
Package Contents
The product package should contain the following items:
•
Model WGR614 Cable/DSL Wireless Router.
•
AC power adapter.
•
Category 5 (CAT5) Ethernet cable.
•
Model WGR614 Resource CD
, including:
—
This guide.
—
Application Notes and other helpful information.
•
WGR614 Cable/DSL Wireless Router Installation Guide.
•
Registration and Warranty Card.
•
Support Information Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the router for repair.
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 146
Reference Manual for Cable/DSL Wireless Router WGR614
1-6
Introduction
The Router’s Front Panel
The front panel of the WGR614 router contains the status LEDs described below.
Figure 1-1:
WGR614 Front Panel
You can use some of the LEDs to verify connections. Viewed from left to right,
Table 1-1
describes the LEDs on the front panel of the router. These LEDs are green when lit.
Table 1-1.
LED Descriptions
Label
Activity
Description
Power
On
Off
Power is supplied to the router.
Power is not supplied to the router.
Internet
On
Blink
The Internet (Wide Area Network) port has detected a link with an
attached device.
Data is being transmitted or received by the Internet port.
Wireless
On
Indicates that the Wireless port is initialized.
Local
On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
The Local (LAN) port has detected link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 146
Reference Manual for Cable/DSL Wireless Router WGR614
Introduction
1-7
The Router’s Rear Panel
The rear panel of the Model RP614 router contains the port connections listed below.
Figure 1-2: WGR614 Rear Panel
Viewed from left to right, the rear panel contains the following features:
•
AC power adapter outlet
•
Four Local (LAN) 10/100 Mbps Ethernet ports for connecting the router to the local PCs
•
Internet (WAN) Ethernet port for connecting the router to a cable or DSL modem
•
Factory Default Reset push button
•
Wireless antenna
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 146
Reference Manual for Cable/DSL Wireless Router WGR614
1-8
Introduction
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.7 / 5 based on 3 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top