NETGEAR WG602 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of NETGEAR WG602 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 2

Installation Guide

Follow these quick steps to install your WG602.

You can also consult the

Reference Manual

on the

54 Mbps Wireless Access

Point Resource CD.

Set Up the WG602 Access Point

Tip:

Before mounting the WG602 in a high location, first set up and

test the WG602 to verify wireless network connectivity.

Prepare a PC with an Ethernet adapter. If this PC is already part

of your network, record its TCP/IP configuration settings.

Configure the PC with a static IP address of 192.168.0.210 and

255.255.255.0 for the Subnet Mask.

Connect an Ethernet cable from the WG602 to the PC (A).

Turn on your computer, connect the power adapter to the

WG602 and verify the following:

The power power light goes on.

The LAN light of the wireless access point is lit when

connected to a powered on PC.

Configure LAN and Wireless Access

Configure the WG602 Ethernet port for LAN access.

•

Connect to the WG602 by opening your browser and

entering

http://192.168.0.227

in the address field.

•

When prompted, enter

admin

for the user name and

password

for the password, both in lower case letters.

•

Click the

IP Settings

link and configure the IP Settings

according to your network setup.

Configure the wireless interface for wireless access. See the online

help or the

Understanding Basic Wireless Settings

topic of the

Reference Manual

on the

54 Mbps Wireless Access Point Resource

for full instructions.

Note:

You must set the Regulatory Domain. It may not be legal

to operate the wireless access point in a region other than one of

those identified in this field.

Now that you have finished the setup steps, you are ready to deploy

the WG602 in your network. If needed, you can now reconfigure the

PC you used in step 1 back to its original TCP/IP settings.

Deploy the WG602 Access Point

Disconnect the WG602 and position it where you will deploy it.

The best location is elevated at the center of your wireless

coverage area.

Lift the antenna so that it is vertical.

Connect an Ethernet cable from your WG602 Access Point to a

LAN port on your router, switch, or hub.

Note:

By default, the WG602 is a DHCP client. If there is no

DHCP server in the network, the WG602 uses 192.168.0.227

as its IP address. If your network used different addressing, you

will need to configure the WG602 accordingly.

Connect the power adapter to the wireless access point and plug

the power adapter in to a power outlet. The power, LAN, and

wireless lights should light up.

Verify Wireless Connectivity

Using a computer with an 802.11b or 802.11g wireless adapter with

the correct wireless settings needed to connect to the WG602 (SSID,

MAC ACL, WEP, WPA, etc.), verify connectivity by using a browser

such as Netscape

or Internet Explorer to browse the Internet, or

check for file and printer access on your network.

Note:

If you cannot connect, see the Troubleshooting Tips on the next

page or the

Reference Manual

on the

54 Mbps Wireless Access Point

Resource CD.

54 Mbps Wireless Access Point WG602 v2

WG602

54 Mbps Wireless Access Point

12 VDC 1.2A

Page 2 / 2

Attention:

When you configure the wireless

settings of this device please make sure to select

the correct country settings. Due to EU-law the

country settings must be identical to the country, where the device is

operating (important due to non-harmonized frequencies in the EU).

*M-10181-02*

M - 1 0 1 8 1 - 0 2

October 2003

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT

SHIPPED WITH YOUR PRODUCT.

By registering your product at

www.NETGEAR.com/register

, we can

provide you with faster expert technical support and timely notices of

product and software upgrades.

NETGEAR, INC.

Support Information

Phone: 1-888-NETGEAR (For US & Canada only) - 24 x 7 phone support

See Support information card for other countries.

E-mail: [email protected] (24 x 7 online support)

www.NETGEAR.com

Connecting are trademarks or registered trademarks of Netgear, Inc. in the United States

and/or other countries. Microsoft and Windows are registered trademarks of Microsoft

Corporation in the United States and/or other countries. Other brand and product names

are trademarks or registered trademarks of their respective holders. Information is subject to

Troubleshooting Tips

If you have trouble setting up your WG602, check the tips below.

No lights are lit on the access point.

The access point has no power.

•

Make sure the power cord is connected to the access point and

plugged in to a working power outlet or power strip.

•

Make sure you are using the correct NETGEAR power adapter

supplied with your access point.

The Ethernet LAN light is not lit.

There is a hardware connection problem.

•

Make sure the cable connectors are securely plugged in at the access

point and the network device (hub, switch, or router).

•

Make sure the connected device is turned on.

•

Be sure the correct cable is used. Use a standard Category 5 Ethernet

patch cable. If the network device has Auto Uplink

™

(MDI/MDIX)

ports, you may use a cross-over cable. See the

Reference Manual

the

54 Mbps Wireless Access Point Resource CD

for a full explanation of

cable types.

The Wireless LAN activity light is not lit.

The access point

’

s antennas are not working.

•

If the Wireless LAN activity light stays off, disconnect the adapter

from its power source and then plug it in again.

•

Make sure the antenna is tightly connected to the WG602.

•

Contact NETGEAR if the Wireless LAN light remains off.

0984

I cannot configure the wireless access point from

a browser.

There is a configuration problem. Check these items:

•

The WG602 is properly installed, LAN connections are OK, and it is

powered on. Check that the LAN port LED is green to verify that the

Ethernet connection is OK.

•

If you are using the NetBIOS name of the WG602 to connect,

ensure that your PC and the WG602 are on the same network

segment or that there is a WINS server on your network.

•

If your PC uses a Fixed (Static) IP address, ensure that it is using an

IP Address in the range of the WG602. The WG602 default IP

Address is 192.168.0.227 and the default Subnet Mask is

255.255.255.0. See the

Reference Manual

on the

54 Mbps Wireless

Access Point Resource CD

for more details.

I cannot access the Internet or the LAN with a

wireless capable computer.

There is a configuration problem. Check these items:

•

You may not have restarted the computer with the wireless adapter to

have TCP/IP changes take effect. Restart the computer.

•

The computer with the wireless adapter may not have the correct

TCP/IP settings to communicate with the network. Restart the

computer and check that TCP/IP is set up properly for that network.

The usual setting for the Windows Network Properties is to be set to

“

Obtain an IP address automatically.

”

•

The access point

’

s default values may not work with your network.

Check the access point default configuration against the configuration

of other devices in your network.

•

For full instructions on changing the access point

’

s default values, see

the

Reference Manual

on the

54 Mbps Wireless Access Point Resource CD.

NETGEAR WG602 Router Manual PDF (Setup & Configuration Guide)

Rate

Popular NETGEAR Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share