1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WG302
    5. /
  5. 22
Page 106 / 128 Scroll up to view Page 101 - 105
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
B-18
Wireless Networking Basics
July 2005 v3.0
Microsoft has worked with many wireless vendors to embed the WPA driver update in the wireless
adapter driver. So, to update your Microsoft Windows wireless client, all you have to do is obtain
the new WPA/WPA2-compatible driver and install the driver.
Changes to Wireless Client Programs
Wireless client programs must be updated to permit the configuration of WPA/WPA2
authentication (and preshared key) and the new WPA/WPA2 encryption algorithms (TKIP and
AES).
To obtain the Microsoft WPA client program, visit the Microsoft Web site.
Note
: The Microsoft WPA2 client is still in beta.
Page 107 / 128
Command Line Reference
C-1
July 2005 v3.0
Appendix C
Command Line Reference
The NETGEAR ProSafe Wireless Access Point 802.11g WG302 (AP) can be configured either through
the command line interface (CLI), a Web browser, or an MIB browser. The CLI allows viewing and
modification of the configuration from a terminal or PC through a telnet connection.
Command Sets
get set del keyword
Description
--- --- --- ---------------------- -------------------------------
[X] [X]
time
--time setting
[X]
|-now
--current system time
[X] [X]
|-zone
--time zone
[X] [X]
`-daylight saving
--daylight saving
[X] [X]
system
--system setting
[X]
|-version
--system firmware version
[X] [X]
|-apname
--system name
[X]
|-macaddr
--system MAC address
[X] [X]
|-country
--country/region
[X] [X]
|-dhcpclient
--system dhcp client
[X] [X]
|-ipaddr
--system IP address
[X] [X]
|-netmask
--system network mask
[X] [X]
|-gateway
--system gateway
[X] [X]
|-dns
--system dns
[X] [X]
| |-primary
--primary system DNS server
[X] [X]
| `-secondary
--secondary system DNS server
[X] [X]
|-stp
--enable spanning tree protocol
[X]
`-ethstats
--ethernet statistics
[X] [X]
dhcp server
--DHCP server
[X] [X]
|-dhcpserver
--enable DHCP server
[X] [X]
|-anyip
--accept static IP (AnyIP function)
[X] [X]
|-ipstart
--starting IP address
[X] [X]
|-ipend
--ending IP address
[X] [X]
|-netmask
--network mask
[X] [X]
|-gateway
--gateway
Page 108 / 128
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
C-2
Command Line Reference
July 2005 v3.0
get set del keyword
Description
--- --- --- ---------------------- -------------------------------
[X] [X]
|-dns
--
[X] [X]
| |-primary
--primary DNS server
[X] [X]
| `-secondary
--secondary DNS server
[X] [X]
|-wins
--
[X] [X]
| |-primary
--primary WINS server
[X] [X]
| `-secondary
--secondary WINS server
[X] [X]
`-lease
--lease time
[X] [X]
radius
--radius setting
[X] [X]
|-auth
--authenication radius setting
[X] [X]
| |-primary
--primary
[X] [X]
| | |-ipaddr
--radius IP address
[X] [X]
| | |-port
--radius port number
[X] [X]
| | `-secret
--radius secret string
[X] [X]
| `-secondary
--secondary
[X] [X]
|
|-ipaddr
--radius IP address
[X] [X]
|
|-port
--radius port number
[X] [X]
|
`-secret
--radius secret string
[X] [X]
`-account
--account radius setting
[X] [X]
|-primary
--primary
[X] [X]
| |-ipaddr
--radius IP address
[X] [X]
| |-port
--radius port number
[X] [X]
| `-secret
--radius secret string
[X] [X]
`-secondary
--secondary
[X] [X]
|-ipaddr
--radius IP address
[X] [X]
|-port
--radius port number
[X] [X]
`-secret
--radius secret string
[X] [X]
ssh
--enable remote SSH access
[X] [X]
snmp
--SNMP setting
[X] [X]
|-server
--enable SNMP agent
[X] [X]
|-trap server
--SNMP TrapServer IP address
[X] [X]
|-read community
--SNMP ReadCommunity
[X] [X]
|-write community
--SNMP WriteCommunity
[X] [X]
`-description
--SNMP System Description
[X] [X]
log
--syslog setting
[X] [X]
|-client
--enable syslog client
[X] [X]
|-ipaddr
--syslog server IP address
[X] [X]
`-port
--syslog server port number
[X] [X]
http redirection
--HTTP Redirection setting
[X] [X]
|-server
--enable HTTP redirection
[X] [X]
`-url
--HTTP redirection URL
Page 109 / 128
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Command Line Reference
C-3
July 2005 v3.0
[get set del keyword
Description
--- --- --- ---------------------- -------------------------------
X] [X] [X] wlan
--wireless setting
[X]
|-version
--wireless driver version
[X] [X]
|-radio
--enable wireless radio
[X] [X]
|-wirelessmode
--wireless mode
[X] [X]
|-channel
--wireless channel (depends on
country and wireless mode)
[X] [X]
|-rate
--wireless transmission date rate
[X] [X]
|-ssid
--wireless network name (1-32 chars)
[X] [X]
|-ssidsuppress
--wireless SSID broadcast suppress
[X] [X]
|-power
--wireless transmit power
[X] [X]
|-antenna
--wireless antenna selection
[X] [X]
|-fragmentationthreshold--wireless fragmentation
threshold (even only)
[X] [X]
|-rtsthreshold
--wireless RTS/CTS threshold
[X] [X]
|-beaconinterval
--wireless beacon period in TU(1024
us)
[X] [X]
|-dtim
--wireless DTIM period in beacon
interval
[X] [X]
|-preamble
--wireless preamble (only effect on
802.11b
|
rates)
[X] [X]
|-super
--enable wireless super-A/G mode
[X] [X]
|-wirelessisolate
--wireless isolate communication
between clients
[X] [X]
|-operationmode
--wireless operation mode
[X] [X] [X]
|-remoteap
--wireless remote AP(s) (depends on
operationmode)
[X] [X] [X]
| |-p2p(+ap)
--remote AP address for p2p mode
[X] [X] [X]
| |-p2mp(+ap)
--remote AP address for p2mp mode
[X] [X] [X]
| | |-1
--1st remote AP address for p2mp mode
[X] [X] [X]
| | |-2
--2nd remote AP address for p2mp mode
[X] [X] [X]
| | |-3
--3rd remote AP address for p2mp mode
[X] [X] [X]
| | `-4
--4th remote AP address for p2mp mode
[X] [X] [X]
| `-repeater
--remote AP address for repeater mode
[X] [X] [X]
|
|-1
--1st remote AP address for repeater
mode
[X] [X] [X]
|
|-2
--2nd remote AP address for repeater
mode
[X] [X] [X]
|
|-3
--3rd remote AP address for repeater
mode
Page 110 / 128
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
C-4
Command Line Reference
July 2005 v3.0
get set del keyword
Description
--- --- --- ---------------------- -------------------------------
[X] [X] [X]
|
`-4
--4th remote AP address for repeater
mode
[X] [X] [X]
|-acl
--wireless access control
[X] [X]
| |-mode
--enable wireless access control
(ACL)
[X] [X] [X]
| `-list
--
[X]
|
|-all
--(delete only) all local ACL address
[X] [X] [X]
|
`-(null)
--edit local ACL address
[X] [X]
|-rogue ap detection --Rogue AP Detection
[X] [X] [X]
|-identified ap list --identified AP list
[X]
| |-all
--empty identified AP list
[X] [X] [X]
| `-(null)
--edit identified AP list
[X]
|-association
--list of associated wireless clients
[X]
|-wlanstats
--wlan statistics
[X] [X]
|-authentication
--wireless authentication type
[X] [X]
|-encryption
--wireless data encryption
[X] [X] [X]
|-key
--wireless wep key setting
[X] [X]
| |-type
--wireless wep key type
[X] [X]
| |-default
--wireless wep default key index
[X] [X] [X]
| |-passphrase
--wireless wep passphrase key
[X] [X] [X]
| |-1
--wireless wep key 1
[X] [X] [X]
| |-2
--wireless wep key 2
[X] [X] [X]
| |-3
--wireless wep key 3
[X] [X] [X]
| `-4
--wireless wep key 4
[X] [X] [X]
|-wpa
--wireless WPA setting
[X] [X] [X]
| |-psk
--wireless pre-shared key (PSK) for
WPA-PSK
[X] [X]
| |-reauthtime
--wireless WPA re-auth period (in
seconds)
[X] [X]
| `-keyupdate
--enable wireless WPA global key
update
[X] [X]
|
|-mode
--wireless WPA global key update
condition
[X] [X]
|
`-interval
--wireless WPA global key update
interval
[X] [X]
|
|-sec
--wireless WPA global key update
interval (in seconds)
[X] [X]
|-autocell
[X] [X]
| |-mode
--autocell mode
[X] [X]
| `-super privacy
--avoid other wlan
[X] [X]
`-wmm
--wmm settings

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top