1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. VEGN2610-1FXAUS FOXTEL
    5. /
  5. 22
Page 106 / 123 Scroll up to view Page 101 - 105
Manage Your Network
106
Dual Band Wireless VDSL2 + Ethernet Gateway
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
Advanced > Administration > Diagnostics
.
5.
In the
IP Address
field, type the target IP address.
6.
Click the
Ping
button.
The ping results display.
To stop a ping test, click the
Abort Test
button.
To clear the results from the display, click the
Clear Results
button.
Set Up Remote Management
You can access your gateway over the Internet to view or change its settings.
Note:
Be sure to change the gateway login password to a secure password.
The ideal password contains no dictionary words from any language
and contains uppercase and lowercase letters, numbers, and
symbols. It can be up to 30 characters. See
Change the admin
Password
on page
101.
To set up remote management:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
www.routerlogin.com
.
A login screen displays.
3.
Enter the gateway user name and password.
Page 107 / 123
Manage Your Network
107
Dual Band Wireless VDSL2 + Ethernet Gateway
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
Advanced > Advanced Setup > Remote Management
.
5.
Select the
Turn Remote Management On
check box.
6.
Under Allow Remote Access By, specify the external IP addresses to be allowed to access
the gateway’s remote management.
For enhanced security, restrict access to as few external IP addresses as practical.
Select one of the following:
•
Only This Computer
. Enter the IP address that will be allowed access.
•
IP Address Range
. Enter a beginning IP address and an ending IP address.
•
Everyone
. Allows access from any IP address on the Internet.
7.
Specify the port number for accessing the web management interface.
Normal web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote web management interface. Choose
a number from 1024 to 65535, but do not use the number of any common service port.
The default is 8080, which is a common alternate for HTTP.
8.
Click the
Apply
button.
Your changes are saved.
Page 108 / 123
Manage Your Network
108
Dual Band Wireless VDSL2 + Ethernet Gateway
Use Remote Access
Before you can access the gateway remotely, you must log in to the gateway and set up
remote management. See
Set Up Remote Management
on page
106.
To use remote access:
1.
Launch a web browser on a computer that is not on your home network.
2.
Type your gateway’s WAN IP address into your browser’s address or location field followed
by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number 8080,
enter
in your browser.
Monitor Internet Traffic
To monitor Internet traffic:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
http://routerlogin.net
or
www.routerlogin.com
.
A login screen displays.
3.
Enter the gateway user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
Page 109 / 123
Manage Your Network
109
Dual Band Wireless VDSL2 + Ethernet Gateway
4.
Select
Advanced > Advanced Setup > Traffic Meter
.
5.
Select the
Enable Traffic Meter
check box.
6.
(Optional) Control the volume of Internet traffic.
You can use either the traffic volume control feature or the connection time control
feature:
•
Select the
Traffic volume control by
radio button and then select one of the
following options:
-
No Limit
. No restriction is applied when the traffic limit is reached.
-
Download only
. The restriction is applied to incoming traffic only.
-
Both Directions
. The restriction is applied to both incoming and outgoing traffic.
•
Select the
Connection time control
radio button and enter the allowed hours in the
Monthly limit
field.
7.
(Optional) If your ISP charges for extra data volume when you make a new connection,
enter the extra data volume in MB in the
Round up data volume for each connection by
field.
8.
In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
If you want the traffic counter to start immediately, click the
Restart Counter Now
button.
9.
In the Traffic Control section, specify whether the gateway should issue a warning message
before the monthly limit of Mbytes or hours is reached.
By default, the value is 0 and no warning message is issued. You can select one of the
following to occur when the limit is reached:
•
The Internet LED blinks green or amber.
Page 110 / 123
Manage Your Network
110
Dual Band Wireless VDSL2 + Ethernet Gateway
•
The Internet connection is disconnected and disabled.
10.
Click the
Apply
button.
Your settings are saved.
11.
In the Internet Traffic Statistics section, monitor the data traffic:
•
To update the Traffic Statistics section, click the
Refresh
button.
•
To display more information about the data traffic on your gateway and to change the
poll interval, click the
Traffic Status
button.

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top