1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. SRX5308
    5. /
  5. 76
Page 376 / 469 Scroll up to view Page 371 - 375
Monitor System Access and Performance
376
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
VLAN Status Screen
The VLAN Status screen displays information about the VLANs that are enabled. Disabled
VLANs are not displayed. For information about enabling and disabling VLANs, see
Assign
and Manage VLAN Profiles
on page
86.
To view the status of the IPv4 VLANs:
Select
Monitoring > Router Status > VLAN Status
. The VLAN Status screen displays:
Figure 239.
IP Address
The IPv4 address of the WAN port. For information about configuring the IPv4 address
of the WAN port, see
Configure the IPv4 Internet Connection and WAN Settings
on
page
29.
IPv6 Address
The IPv6 address and prefix length of the WAN port. For information about configuring
the IPv6 address and prefix length of the WAN port, see
Configure the IPv6 Internet
Connection and WAN Settings
on page
52.
Subnet Mask
The IPv4 subnet mask of the WAN port. For information about configuring the subnet
mask of the WAN port, see
Configure the IPv4 Internet Connection and WAN Settings
on page
29.
Gateway
The IPv4 address of the gateway.
These IPv4 settings are either
obtained dynamically from your ISP
or specified by you on the WAN IPv4
ISP Settings screen (see
Manually
Configure an IPv4 Internet
Connection
on page
34).
Primary DNS
The IPv4 address of the primary DNS server.
Secondary DNS
The IPv4 address of the secondary DNS server.
MAC Address
The default MAC address for the port or the MAC address that you have specified on
the WAN Advanced Options screen for the port. For information about configuring the
MAC address, see
Configure Advanced WAN Options and Other Tasks
on page
71.
Gateway (IPv6)
The IPv6 address of the gateway.
These IPv6 settings are either
obtained dynamically from your ISP
or specified by you on the WAN IPv6
ISP Settings screen (see
Configure
a Static IPv6 Internet Connection
on
page
58 or
Configure a PPPoE IPv6
Internet Connection
on page
61).
Primary DNS (IPv6)
The IPv6 address of the primary DNS server.
Secondary DNS (IPv6)
The IPv6 address of the secondary DNS server.
Table 93.
Detailed Status screen information (continued)
Item
Description
Page 377 / 469
Monitor System Access and Performance
377
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
The following table explains the fields of the VLAN Status screen:
Tunnel Status Screen
The IPv6 Tunnel Status screen displays the status of all active 6to4 and ISATAP tunnels and
their IPv6 addresses.
To view the status of the tunnels and IPv6 addresses:
Select
Monitoring > Router Status > Tunnel Status
. The Tunnel Status screen displays:
Figure 240.
The IPv6 Tunnel Status table shows the following fields:
•
Tunnel Name
. The tunnel name for the 6to4 tunnel is always sit0-WAN1 (SIT stands for
simple Internet transition); the tunnel name for an ISATAP tunnel is isatapx-LAN, in which
x is an integer.
•
IPv6 Address
. The IPv6 address of the local tunnel endpoint.
Table 94.
VLAN Status screen information
Item
Description
Profile Name
The unique name for the VLAN that you have assigned on the Add
VLAN Profile screen.
For information about
configuring VLANs,
see
Configure a VLAN
Profile
on page
88.
VLAN ID
The identifier for the VLAN that you have assigned on the Add
VLAN Profile screen.
MAC Address
VLANs can have the same MAC address as the associated LAN
port or can be assigned a unique MAC address, depending on the
VLAN MAC settings that you have specified on the IPv4 LAN
Advanced screen (see
Configure VLAN MAC Addresses and LAN
Advanced Settings
on page
93).
Subnet IP
The IP address and subnet mask that you have assigned on the
Add VLAN Profile screen.
DHCP Status
The DHCP status for the VLAN, which can be either DHCP
Enabled or DHCP Disabled, depending on the DHCP configuration
that you have specified on the Add VLAN Profile screen.
Port Membership
The ports that you have associated with the VLAN on the Add
VLAN Profile screen.
Page 378 / 469
Monitor System Access and Performance
378
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
View the VPN Connection Status, L2TP Users, and PPTP
Users
The Connection Status screens display a list of IPSec VPN connections, SSL VPN
connections, and L2TP users who are logged in to the VPN firewall.
To view the active IPSec VPN connections:
Select
VPN > Connection Status
.
The Connection Status submenu tabs display with the
IPSec VPN Connection Status screen in view:
Figure 241.
The policy name, the endpoint’s IP address, the amount of data and number of packets
transmitted, and the state of the connection are listed in the table.
To activate a tunnel, click the
Connect
table button to the right of the policy’s table entry; to
disconnect an active connection, click the
Disconnect
table button to the right of the policy’s
table entry.
The default poll interval is 10 seconds. To change the poll interval period, enter a new value
in the Poll Interval field, and click the
Set Interval
button. To stop polling, click the
Stop
button.
To view the active SSL VPN connections:
Select
VPN > Connection Status > SSL VPN Connection Status
.
The SSL VPN
Connection Status screen displays:
Figure 242.
Page 379 / 469
Monitor System Access and Performance
379
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
The active user’s user name, group, and IP address are listed in the table with a time stamp
indicating the time and date that the user connected.
To disconnect an active connection, click the
Disconnect
table button to the right of the
policy’s table entry.
To view the active L2TP tunnel users:
Select
VPN > Connection Status > L2TP Active Users
.
The L2TP Active Users screen
displays. (The following figure does not show any active users.)
Figure 243.
The List of L2TP Active Users table lists each active connection with the information that is
described in the following table.
To view the active PPTP tunnel users:
Select
Monitoring > Active Users & VPNs > PPTP Active Users
.
The PPTP Active Users
screen displays. (The following figure does not show any active users.)
Figure 244.
Table 95.
L2TP Active Users screen information
Item
Description
Username
The name of the L2TP user that you have defined (see
Configure User Accounts
on
page
310
).
Remote IP
The client’s IP address on the remote LAC.
L2TP IP
The IP address that is assigned by the L2TP server on the VPN firewall.
Action
Click the
Disconnect
table button to terminate the L2TP connection.
Page 380 / 469
Monitor System Access and Performance
380
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
The List of PPTP Active Users table lists each active connection with the information that is
described in the following table.
View the VPN Logs
To display the IPSec VPN log:
Select
Monitoring > VPN Logs
. The Logs tabs display with the IPSec VPN Logs screen in
view.
Figure 245.
To display the SSL VPN log:
Select
Monitoring > VPN Logs > SSL VPN Logs
.
The SSL VPN Logs screen displays:
Table 96.
PPTP Active Users screen information
Item
Description
Username
The name of the PPTP user that you have defined (see
Configure User Accounts
on
page
310).
Remote IP
The remote client’s IP address.
PPTP IP
The IP address that is assigned by the PPTP server on the VPN firewall.
Action
Click the
Disconnect
table button to terminate the connection. (This button is displayed
only when there an active connection.)

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top