1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. RP614v2
    5. /
  5. 10
Page 46 / 121 Scroll up to view Page 41 - 45
Reference Manual for the Model RP614 v2 Web Safe Router
4-2
Maintenance
This screen shows the following parameters:
Table 4-1.
Menu 3.2 - Router Status Fields
Field
Description
Account Name
This field displays the Host Name assigned to the router.
Firmware Version
This field displays the router firmware version.
Internet Port
These parameters apply to the Internet (WAN) port of the router.
MAC Address
This field displays the Media Access Control address being used by the
Internet (WAN) port of the router.
IP Address
This field displays the IP address being used by the Internet (WAN) port
of the router. If no address is shown, the router cannot connect to the
Internet.
IP Subnet Mask
This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the router.
DHCP
If set to None, the router is configured to use a fixed IP address on the
WAN.
If set to Client, the router is configured to obtain an IP address dynami-
cally from the ISP.
LAN Port
These parameters apply to the Local (WAN) port of the router.
MAC Address
This field displays the Media Access Control address being used by the
LAN port of the router.
IP Address
This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.0.1
IP Subnet Mask
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0
DHCP
Identifies if the router’s built-in DHCP server is active for the LAN
attached devices.
Page 47 / 121
Reference Manual for the Model RP614 v2 Web Safe Router
Maintenance
4-3
Click on the “Connection Status” button to display the connection status, as shown below.
Figure 4-2.
Connection Status screen
This screen shows the following statistics:.
Table 4-1.
Connection Status Fields
Field
Description
IP Address
The WAN (Internet) IP Address assigned to the router.
Subnet Mask
The WAN (Internet) Subnet Mask assigned to the router.
Default Gateway
The WAN (Internet) default gateway the router communicates with.
DHCP Server
The WAN (Internet) DHCP Server the router communicates with.
DNS Server
The WAN (Internet) DNS Server for the router.
Lease Obtained
When the DHCP lease started.
Lease Expires
When the DHCP lease will expire.
Page 48 / 121
Reference Manual for the Model RP614 v2 Web Safe Router
4-4
Maintenance
Log action buttons are described in
Table 4-2
Click on the “Show Statistics” button to display router usage statistics, as shown below.
Figure 4-3.
Router Statistics screen
This screen shows the following statistics:.
Table 4-2.
Connection Status action buttons
Field
Description
Release
Click the Release button to release the DHCP lease.
Renew
Click the Renew button to renew the DHCP lease.
Close Window
Click this button to close the window.
Table 4-1.
Router Statistics Fields
Field
Description
Port
The statistics for the WAN (Internet) and LAN (local) ports. For each port, the screen
displays:
Status
The link status of the port.
TxPkts
The number of packets transmitted on this port since reset or manual clear.
RxPkts
The number of packets received on this port since reset or manual clear.
Collisions
The number of collisions on this port since reset or manual clear.
Tx B/s
The current transmission (outbound) bandwidth used on the WAN and LAN ports.
Rx B/s
The current reception (inbound) bandwidth used on the WAN and LAN ports.
Page 49 / 121
Reference Manual for the Model RP614 v2 Web Safe Router
Maintenance
4-5
Viewing a List of Attached Devices
The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 4-4.
Attached Devices menu
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers
the devices. To force the router to look for attached devices, click the Refresh button.
Upgrading the Router Software
The routing software of the RP614 v2 router is stored in FLASH memory, and can be upgraded as
new software is released by NETGEAR. Upgrade files can be downloaded from Netgear's website.
If the upgrade file is compressed (.ZIP file), you must first extract the binary (.BIN) file before
sending it to the router. The upgrade file can be sent to the router using your browser.
Note:
The Web browser used to upload new firmware into the RP614 v2 router must support
HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer or Netscape Navigator
3.0 or above.
Up Time
The time elapsed since this port acquired the link.
Poll Interval
Specifies the intervals at which the statistics are updated in this window. Click on Stop
to freeze the display.
Table 4-1.
Router Statistics Fields (continued)
Field
Description
Page 50 / 121
Reference Manual for the Model RP614 v2 Web Safe Router
4-6
Maintenance
From the Main Menu of the browser interface, under the Maintenance heading, select the Router
Upgrade heading to display the menu shown below.
Figure 4-5.
Router Upgrade menu
To upload new firmware:
1.
Download and unzip the new software file from NETGEAR.
2.
In the Router Upgrade menu, click the Browse button and browse to the location of the binary
(.BIN) upgrade file
3.
Click Upload.
Note:
When uploading software to the RP614 v2 router, it is important not to interrupt the
Web browser by closing the window, clicking a link, or loading a new page. If the browser is
interrupted, it may corrupt the software. When the upload is complete, your router will
automatically restart. The upgrade process will typically take about one minute.
In some cases, you may need to reconfigure the router after upgrading.
Configuration File Management
The configuration settings of the RP614 v2 router are stored within the router in a configuration
file. This file can be saved (backed up) to a user’s PC, retrieved (restored) from the user’s PC, or
cleared to factory default settings.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top