1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. R7500v2
    5. /
  5. 2
Page 6 / 22 Scroll up to view Page 1 - 5
4
4.
Add power to the router:
a.
Connect the power adapter to the router and plug the
power adapter into an outlet.
b.
Wait for the Power LED on the front panel to light amber
and turn white.
If no LEDs are lit, press the
Power On/Off
button on the
rear panel of the router.
5.
Connect a computer or WiFi device.
You can use an Ethernet cable to connect a computer to the
router or you can use WiFi to connect a computer or WiFi
device to the router:
•
For a wired connection, use an Ethernet cable (not included)
to connect your computer to a black Ethernet port on your
router.
•
To connect your computer or WiFi device to the router with
WiFi, use the WiFi settings on the product label.
Ethernet
cable
Modem
Cable or
DSL
Ethernet
cable
Internet
Power
adapter
Router
Router
Ethernet
cable
Modem
Internet
Power
adapter
Cable or
DSL
Power
adapter
Computer
Page 7 / 22
5
6.
Launch a web browser.
The first time that you connect to the router, the genie screen
displays. Follow the genie steps to connect to the Internet.
If the genie screen does not display, try the following:
•
Close and reopen the browser.
•
Make sure that your computer is connected to one of the
four black Ethernet ports on the router, or that you are
connected to your WiFi network.
•
Make sure that the router is receiving full power, and that
its Power LED is lit.
•
If your computer is set to a static or fixed IP address (this is
uncommon), change it to obtain an IP address automatically
from the router.
If you still do not see the genie screen, log in to the router so
that genie can detect your Internet connection.
¾
To log in to the router:
1.
Launch a web browser.
2. Enter
www.routerlogin.net
in the address field of the
browser.
A login screen displays.
3. Enter
admin
for the user name and
password
for the
password.
The BASIC Home screen displays. If your Internet connection
is not set up yet, genie automatically detects your Internet
connection.
Page 8 / 22
6
WiFi Network Name and Password
The preset WiFi network name (SSID) and password (network key)
are unique to your router, like a serial number. Because the router
automatically uses WiFi security, you don’t need to set it up. The
WiFi settings are on the product label.
NETGEAR recommends that you use the preset WiFi settings
because you can check the product label if you forget them.
NETGEAR genie lets you change these settings. If you do so, write
down the new WiFi settings and store them in a safe place.
You can write the WiFi settings from your product label in this space
for easy reference.
WiFi network name (SSID):
Network key (password):
If you change the WiFi settings, write the new settings here for
easy reference and store this booklet in a safe place.
WiFi network name (SSID):
Network key (password):
Page 9 / 22
7
Join the WiFi Network
You can either use Wi‑Fi Protected Setup (WPS) or select your WiFi
network and type its password. For help with the
WPS
button on
your computer or WiFi device, check the instructions or online help
that came with that computer or device. Some older equipment
cannot use WPS.
¾
To join the network using WPS:
1. Press the
WPS
button on the router.
The WPS LED on the router blinks white.
2.
Within two minutes, on your computer or WiFi device, press its
WPS
button or click its onscreen
WPS
button.
The WPS LED on the router lights solid white when the
computer or WiFi device connects to your router.
3.
Repeat this process to add other computers or WiFi devices.
¾
To select your network and enter its password:
1.
Open the software utility that manages your WiFi connections
on the computer or WiFi device that you want to connect to
your router.
This utility scans for WiFi networks in your area.
2.
Find and select your router’s WiFi network name (SSID).
The SSID is on the product label.
3.
Enter the router’s password (or your custom password if you
changed it) and click the
Connect
button.
The password is on the product label.
4.
Repeat Step 1 through Step 3 to add other computers or WiFi
devices.
Page 10 / 22
8
View or Change the Router Settings
After you use genie to set up the router, you can log in to the router
to view or change its settings.
Log In to the Router
¾
To log in to the router:
1.
Connect a computer or WiFi device to the router.
You can use an Ethernet cable or connect with WiFi:
•
For a wired connection, use an Ethernet cable (not included)
to connect your computer to a black Ethernet port on your
router.
•
To connect with WiFi, select and join your WiFi network.
2.
Launch a web browser.
3. Enter
www.routerlogin.net
in the address field of the
browser.
A login screen displays.
4. Enter
admin
for the user name and
password
for the
password.
The BASIC Home screen displays.
Change the admin Password
¾
To change the admin password:
1.
Launch a web browser.
2. Enter
www.routerlogin.net
in the address field of the
browser.
A login screen displays.

Rate

4.3 / 5 based on 3 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top