Page 51 / 169 Scroll up to view Page 46 - 50
Optimize Performance
51
Nighthawk AC1900
Smart
WiFi
Router Model
R7000
Portmap Table also displays what type of port is open and whether that port is still active
for each IP address.
9.
To refresh the information in the UPnP Portmap table, click the
Refresh
button.
Wi-Fi Multimedia Quality of Service
Wi-Fi Multimedia Quality of Service (WMM QoS) prioritizes wireless voice and video traffic
over the WiFi link. WMM QoS is automatically enabled for the router.
WMM QoS prioritizes wireless data packets from different applications based on four access
categories: voice, video, best effort, and background. For an application to receive the
benefits of WMM QoS, both it and the client running that application must have WMM
enabled. Legacy applications that do not support WMM and applications that do not require
QoS are assigned to the best effort category, which receives a lower priority than voice and
video.
To disable WMM QoS:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Setup > QoS Setup
.
5.
Clear the
Enable WMM (Wi-Fi multimedia) settings (2.4 GHz b/g/n)
check box.
6.
Clear the
Enable WMM (Wi-Fi multimedia) settings (5 GHz b/g/n)
check box.
7.
Click the
Apply
button.
Your changes are saved.
Page 52 / 169
52
5
5.
Control Access to the Internet
The router comes with a built-in firewall that helps protect your home network from unwanted
intrusions from the Internet.
This chapter includes the following sections:
Set Up Parental Controls
Block Access to Your Network
Use Keywords to Block Internet Sites
Block Services from the Internet
Schedule When to Block Internet Sites and Services
Avoid Blocking on a Trusted Computer
Set Up Security Event Email Notifications
Page 53 / 169
Control Access to the Internet
53
Nighthawk AC1900
Smart
WiFi
Router Model
R7000
Set Up Parental Controls
The first time that you select Parental Controls from the BASIC Home screen, your browser
goes to the Live Parental Controls website, where you can learn more about Live Parental
Controls and download the application.
To set up Live Parental Controls:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
Parental Controls
.
5.
Click either the
Windows Users
or
Mac Users
button.
6.
Follow the onscreen instructions to download and install the NETGEAR Live Parental
Controls management utility.
Page 54 / 169
Control Access to the Internet
54
Nighthawk AC1900
Smart
WiFi
Router Model
R7000
After installation, Live Parental Controls automatically starts.
7.
Click the
Next
button.
8.
Read the note, and click the
Next
button again to proceed.
Because Live Parental Controls uses free OpenDNS accounts, you are prompted to log in
or create a free account.
9.
Select the radio button that applies to you:
If you already have an OpenDNS account, leave the
Yes
radio button selected.
If you do not have an OpenDNS account, select the
No
radio button.
10.
Click the
Next
button.
If you are creating an account, the following screen displays:
Page 55 / 169
Control Access to the Internet
55
Nighthawk AC1900
Smart
WiFi
Router Model
R7000
11.
Complete the fields and click the
Next
button.
After you log on or create your account, the filtering level screen displays:
12.
Select a radio button for a filtering level and click the
Next
button.
13.
Click the
Take me to the status screen
button.
Parental controls are now set up for the router. The dashboard shows Parental Controls as
Enabled.
Block Access to Your Network
You can use access control to block access to your network.
To set up access control:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top