1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. R6400
    5. /
  5. 31
Page 151 / 178 Scroll up to view Page 146 - 150
Use VPN to Access Your Network
154
AC1750
Smart
WiFi
Router
The page displays the progress of the installation and then displays the final installation
page.
10.
Click the
Finish
button.
11.
Unzip the configuration files that you downloaded and copy them to the folder where the
VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Program files\OpenVPN\config\
by default.
12.
For a client device with Windows, modify the VPN interface name to
NETGEAR-VPN
:
a.
In Windows, select
Control Panel > Network and Internet > Network Connections
.
b.
In the local area connection list, find the local area connection with the device name
TAP-Windows Adapter
.
c.
Select the local area connection and change its name (not its device name) to
NETGEAR-VPN
.
If you do not change the VPN interface name, the VPN tunnel connection will fail.
Use a VPN Tunnel
After you set up the router to use VPN and install the OpenVPN application on your
computer, you can open a VPN tunnel from your computer to your router over the Internet.
For the VPN tunnel to work, the local LAN IP address of the remote R6400 router must use a
different LAN IP scheme from that of the local LAN where your VPN client computer is
connected. If both networks use the same LAN IP scheme, when the VPN tunnel is
established, you cannot access your home router or your home network with the OpenVPN
software.
The default LAN IP address scheme for the R6400 router is 192.x.x.x. The most common IP
schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x. If you experience a conflict, change the IP
scheme either for your home network or for the network with the client VPN computer. For
information about changing these settings, see
Change the LAN TCP/IP Settings
on
page
110.
Page 152 / 178
Use VPN to Access Your Network
155
AC1750
Smart
WiFi
Router
To open a VPN tunnel:
1.
Launch the OpenVPN application with administrator privileges.
The
OpenVPN
icon displays in the Windows taskbar.
Tip:
You can create a shortcut to the VPN program, then use the shortcut
to access the settings and select the
run as administrator
check
box. Then every time you use this shortcut, OpenVPN automatically
runs with administrator privileges.
2.
Right-click the
OpenVPN
icon.
3.
Select
Connect
.
The VPN connection is established. You can do the following:
•
Launch an Internet browser and log in to your router.
•
Use Windows File Manager to access the router’s USB drive and download files.
Page 153 / 178
Use VPN to Access Your Network
156
AC1750
Smart
WiFi
Router
Use VPN to Access the Router’s USB Drive and Media
To access the router’s USB drive and download files:
1.
In Windows File Manager, select the
Network
folder.
The network resources display. The
ReadySHARE
icon is in the Computer section and
the remote
R6400
icon is in the Media Devices section (if DLNA is enabled in the router).
2.
If the icons do not display, click the
Refresh
button to update the page.
If the local LAN and the remote LAN are using the same IP scheme, the remote R6400
icon does not display in the Media Devices and Network Infrastructure sections.
3.
To access the router’s USB drive, click the
ReadySHARE
icon.
4.
To access media on the router’s network, click the
R6400
icon.
Use VPN to Access Your Internet Service at Home
When you’re away from home and you access the Internet, you usually use a local Internet
service provider. For example, at a coffee shop you might be given a code that lets you use
the coffee shop’s Internet service account to surf the web.
The router lets you use a VPN connection to access your own Internet service when you’re
away from home. You might want to do this if you travel to a geographic location that doesn’t
support all the Internet services that you use at home. For example, your Netflix account
might work at home, but not in a different country.
Set Up VPN Client Internet Access in the Router
By default, the router is set up to allow VPN connections only to your home network, but you
can change the setting to allow Internet access. Accessing the Internet remotely through a
VPN might be slower than accessing the Internet directly.
To allow VPN clients to use your home Internet service:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
Page 154 / 178
Use VPN to Access Your Network
157
AC1750
Smart
WiFi
Router
2.
Type
or
.
A login window opens.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > VPN Service
.
The VPN page displays.
5.
Select the
Enable VPN Service
radio button.
6.
Scroll down to the Clients will use this VPN connection to access section, and select the
All
sites on the Internet & Home Network
radio button.
When you access the Internet with the VPN connection, instead of using a local Internet
service, you use the Internet service from your home network.
7.
Click the
Apply
button.
Your settings are saved.
8.
Click
For Windows
or
For Non Windows
button and download the configuration files for
your VPN clients.
9.
Unzip the configuration files and copy them to the folder where the VPN client is installed on
your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Program files\OpenVPN\config\
by default.
Block VPN Client Internet Access in the Router
By default, the router is set up to allow VPN connections only to your home network, not to
the Internet service for your home network. If you changed this setting to allow Internet
access, you can change it back.
To allow VPN clients to access only your home network:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login window opens.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > VPN Service
.
Page 155 / 178
Use VPN to Access Your Network
158
AC1750
Smart
WiFi
Router
The VPN page displays.
5.
Select the
Enable VPN Service
radio button.
6.
Scroll down to the Clients will use this VPN connection to access section, and select the
Home Network only
radio button.
This is the default setting. The VPN connection is only to your home network, not to the
Internet service for your home network.
7.
Click the
Apply
button.
Your settings are saved.
8.
Click
For Windows
or
For Non Windows
button and download the configuration files for
your VPN clients.
9.
Unzip the configuration files and copy them to the folder where the VPN client is installed on
your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Program files\OpenVPN\config\
by default.
Use a VPN Tunnel to Access Your Internet Service at Home
To access your Internet service:
1.
Set up the router to allow VPN access to your Internet service.
See
Set Up VPN Client Internet Access in the Router
on page
156.
2.
On your computer, launch the OpenVPN application.
The
OpenVPN
icon displays in the Windows taskbar.
3.
Right-click the icon, and select
Connect
.
4.
When the VPN connection is established, launch your Internet browser.

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top