1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. R6300
    5. /
  5. 15
Page 71 / 128 Scroll up to view Page 66 - 70
71
8
8.
Administration
Managing your network
This chapter describes the router settings for administering and maintaining your router and
home network. See
Remote Management
on page
101 for information about upgrading or
checking the status of your router over the Internet, and
Traffic Meter
on page
104 for
information about monitoring Internet traffic on your router’s Internet port.
This chapter includes the following sections:
•
Upgrade the Router Firmware
•
View Router Status
•
View Logs of Web Access or Attempted Web Access
•
Manage the Configuration File
•
Set Password
Page 72 / 128
Administration
72
R6300 WiFi Router 802.11ac Dual Band Gigabit
Upgrade the Router Firmware
The router firmware (routing software) is stored in flash memory. You can update the firmware
from the Administration menu on the Advanced tab. You might see a message at the top of
the Genie screens when new firmware is available for your product.
You can use the Check button on the Router Update screen to check and update to the latest
firmware for your product if new firmware is available.
To check for new firmware and update your router:
1.
Select
Advanced > Administration > Router Update
to display the following screen:
Click
Check
2.
Click
Check
.
The router finds new firmware information if any is available.
3.
Click
Yes
to update and locate the firmware you downloaded (the file ends in .img).
WARNING!
When uploading firmware to the router,
do not
interrupt the web
browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it could corrupt the firmware.
When the upload is complete, your router restarts. The upgrade process typically takes
about 1 minute. Read the new firmware release notes to determine whether or not you
need to reconfigure the router after upgrading.
Page 73 / 128
Administration
73
R6300 WiFi Router 802.11ac Dual Band Gigabit
View Router Status
To view router status and usage information, select
Advanced Home
or select
Administration > Router Status
to display the following screen:
Router Information
Hardware Version
. The router model.
Firmware Version
. The version of the router firmware. It changes if you upgrade the router
firmware.
GUI Language Version
. The localized language of the user interface.
LAN Port
.
•
MAC Address
. The Media Access Control address. This is the unique physical address
used by the Ethernet (LAN) port of the router.
•
IP Address
. The IP address used by the Ethernet (LAN) port of the router. The default is
192.168.1.1.
•
DHCP Server
. Identifies whether the router’s built-in DHCP server is active for devices on
the LAN.
Internet Provider (WAN) Setup
MAC Address
. The Media Access Control address, which is the unique physical address
used by the Internet (WAN) port of the router.
IP Address
. The IP address used by the Internet (WAN) port of the router. If no address is
shown or the address is 0.0.0, the router cannot connect to the Internet.
Page 74 / 128
Administration
74
R6300 WiFi Router 802.11ac Dual Band Gigabit
Connection
. This shows if the router is using a fixed IP address on the WAN. If the value is
DHCP Client, the router obtains an IP address dynamically from the ISP.
IP Subnet Mask
. The IP subnet mask used by the Internet (WAN) port of the router.
Domain Name Server
. The Domain Name Server addresses used by the router. A Domain
Name Server translates human-language URLs such as
www.netgear.com
into IP
addresses.
Statistics Button
On the Router Status screen, in the Internet Provider (WAN) Setup pane, click the
Statistics
button to display the following screen:
Figure 6. System up time and poll interval statistics
System Up Time
. The time elapsed since the router was last restarted.
Port
. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the
screen displays:
•
Status
. The link status of the port.
•
TxPkts
. The number of packets transmitted on this port since reset or manual clear.
•
RxPkts
. The number of packets received on this port since reset or manual clear.
•
Collisions
. The number of collisions on this port since reset or manual clear.
•
Tx B/s
. The current transmission (outbound) bandwidth used on the WAN and LAN ports.
•
Rx B/s
. The current reception (inbound) bandwidth used on the WAN and LAN ports.
•
Up Time
. The time elapsed since this port acquired the link.
•
Poll Interval
. The interval at which the statistics are updated in this screen.
To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
Set Interval
.
To stop the polling entirely, click
Stop
.
Page 75 / 128
Administration
75
R6300 WiFi Router 802.11ac Dual Band Gigabit
Connection Status Button
On the Router Status screen in the Internet Connection pane, click the
Connection Status
button to view connection status information.
Figure 7. View connection status information
The Release button returns the status of all items to 0. The Renew button refreshes the
items. The Close Window button closes the Connection Status screen.
IP Address
. The IP address that is assigned to the router.
Subnet Mask
. The subnet mask that is assigned to the router.
Default Gateway
. The IP address for the default gateway that the router communicates with.
DHCP Server
. The IP address for the Dynamic Host Configuration Protocol server that
provides the TCP/IP configuration for all the computers that are connected to the router.
DNS Server
. The IP address of the Domain Name Service server that provides translation of
network names to IP addresses.
Lease Obtained
. The date and time when the lease was obtained.
Lease Expires
. The date and time that the lease expires.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top