1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. R6250
    5. /
  5. 15
Page 71 / 129 Scroll up to view Page 66 - 70
Security
71
R6250 Smart WiFi Router
To enable port triggering:
1.
Select
Advanced > Advanced Setup > Port Forwarding/Port Triggering
.
2.
Select the
Port Triggering
radio button.
3.
Clear the
Disable Port Triggering
check box.
Note:
If the Disable Port Triggering check box is selected after you
configure port triggering, port triggering is disabled. However, any
port triggering configuration information you added to the router is
retained even though it is not used.
4.
In the Port Triggering Timeout field, enter a value up to 9999 minutes.
This value controls the inactivity timer for the designated inbound ports. The inbound
ports close when the inactivity time expires. This is required because the router cannot be
sure when the application has terminated.
To add a port triggering service:
1.
On the Port Triggering screen, click
Add Service
.
2.
In the Service Name field, type a descriptive service name.
Page 72 / 129
Security
72
R6250 Smart WiFi Router
3.
In the Service User list, select
Any,
or select
Single address
and enter the IP address of
one computer.
•
Any (the default), allows any computer on the Internet to use this service.
•
Single address
restricts the service to a particular computer.
4.
Select the service type, either
TCP
or
UDP
or both (
TCP/UDP
). If you are not sure, select
TCP/UDP.
5.
In the Triggering Port field, enter the number of the outbound traffic port to open the ause the
inbound ports to be opened.
6.
Enter the inbound connection port information in the Connection Type, Starting Port, and
Ending Port fields.
7.
Click
Apply
.
The service is added in to the Portmap Table.
8.
Make sure that you enable port triggering so that the service that you added takes effectwillis
used.
Schedule Blocking
You can specify the days and time that you want to block Internet access.
To schedule blocking:
1.
Select
Advanced > Security > Schedule
.
2.
Set up the schedule for blocking keywords and services.
•
Days to Block
. Select days on which you want to apply blocking by selecting the
appropriate check boxes, or select
Every Day
to select the check boxes for all days.
•
Time of Day to Block
. Select a start and end time in 24-hour format, or select
All
Day
for 24-hour blocking.
3.
Select your time zone from the list. If you use daylight savings time, select the
Automatically adjust for daylight savings time
check box.
Page 73 / 129
Security
73
R6250 Smart WiFi Router
4.
Click
Apply
.
Your settings are saved.
Security Event Email Notifications
To receive logs and alerts by email, provide your email information in the E-mail screen, and
specify which alerts you want to receive and how often.
To set up email notifications:
1.
Select
Advanced > Security >
E-mail
.
2.
Select the
Turn Email Notification On
check box.
3.
In the Your Outgoing Mail Server field, enter the name of your ISP’s outgoing (SMTP) mail
server (such as mail.myISP.com).
You might be able to find this information in the configuration screen of your email
program. If you leave this field blank, log and alert messages are not sent.
4.
Enter the email address to which logs and alerts are sent in the Send to This Email Address
field.
This email address is also used for the From address. If you leave this field blank, log and
alert messages are not sent.
5.
If your outgoing email server requires authentication, select the
My Mail Server requires
authentication
check box. Fill in the User Name and Password fields for the outgoing email
server.
6.
(Optional) Select the
Send Alerts Immediately
check box.
Email alerts are sent immediately when someone attempts to visit a blocked site.
7.
(Optional) Fill in the fields in the Send logs according to this schedule section of the screen.
Logs are sent automatically. If the log fills up before the specified time, the log is emailed.
After the log is sent, the log is cleared from the router memory. If the router cannot email
Page 74 / 129
Security
74
R6250 Smart WiFi Router
the log file, the log buffer might fill up. In this case, the router overwrites the log and
discards its contents.
8.
Click
Apply
.
Your settings are saved.
Page 75 / 129
75
8
8.
Administration
Manage your network
This chapter describes the router settings for administering and maintaining your router and
home network.
This chapter includes the following sections:
•
Upgrade the Router Firmware
•
View Router Status
•
View Logs of Web Access or Attempted Web Access
•
Manage the Configuration File
•
Change the Password
•
Password Recovery
For information about upgrading or checking the status of your router over the Internet, see
Remote Management
on page
99. For information about monitoring Internet traffic, see
Traffic
Meter
on page
111

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top