1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. R6200v2
    5. /
  5. 10
Page 46 / 131 Scroll up to view Page 41 - 45
USB Storage
46
R6200v2 Smart WiFi Router
Connect a USB Storage Device to the Router
ReadySHARE lets you access and share or a USB drive connected the router USB port. If
your USB device has special drivers, it is not compatible.
To connect a USB storage device:
1.
Insert your USB storage device into the USB port on the rear panel of the router.
2.
If your USB device has a power supply, you must use it when you connect the USB device
to the router.
It might take up to 2 minutes before the USB device is ready for sharing.
Safely Remove a USB Drive
If you want to physically disconnect a USB drive from the router USB port, first, log in to the
router, and then safely remove the USB device.
To remove a USB drive safely:
1.
Select
USB Storage > Basic Settings
.
2.
Click the
Safely Remove USB Device
button.
This takes the drive offline.
3.
Physically disconnect the USB drive.
Access the USB Storage Device
When you connect the USB device to the router USB port, it might take up to two minutes
before it is ready for sharing. By default, the USB storage device is available to all computers
on your local area network (LAN).
To access the USB device from a Mac:
1.
Select
Go > Connect to Server
.
2.
Enter
smb://readyshare
as the server address.
3.
Click the
Connect
button.
Page 47 / 131
USB Storage
47
R6200v2 Smart WiFi Router
To access the USB device from a Windows computer:
Use any of these methods:
•
Select
Start > Run
. Enter
\\readyshare
in the dialog box and click the
OK
button.
•
Open a browser and enter
\\readyshare
in the address bar.
•
Open My Network Places and enter
\\readyshare
in the address bar.
To map the USB device to a Windows network drive:
1.
Visit
www.netgear.com/readyshare.
2.
In the ReadySHARE USB Storage Access pane, click the
PC Utility
button.
The readyshareconnect.exe file is downloaded to your computer.
3.
Launch readyshareconnect.exe.
4.
Select the drive letter that you want to map to the network folder.
5.
(Optional) If you want to connect to the USB drive as a different user, select the
Connect
using different credentials
check box.
a.
Type the user name and password that you want to use.
b.
Click the
OK
button.
6.
Click the
Finish
button.
The USB drive is mapped to the drive letter that you specified.
To access the USB drive from a remote computer:
1.
Launch a web browser.
2.
Connect using the router’s Internet port IP address.
If you are using Dynamic DNS, you can type the DNS name, rather than the IP address.
You can view the router’s Internet IP address on the Basic Home screen (see
Dashboard
(BASIC Home Screen)
on page
16).
Page 48 / 131
USB Storage
48
R6200v2 Smart WiFi Router
To access the USB drive with FTP from a remote computer:
1.
Make sure that the FTP check box is selected in the Access Method section of the USB
Storage (Advanced Settings) screen (see
USB Storage Device Network and Access
Settings
on page
51).
2.
Launch a web browser.
3.
Type
ftp://
and the Internet port IP address in the address field of the browser.
For example, type
.
If you are using Dynamic DNS, you can type the DNS name rather than the IP address.
4.
Type the account name and password for the account that has access rights to the USB
drive.
The user name (account name) for All – no password is
guest
.
The directories of the USB drive that your account has access to display. For example,
you could see: share/partition1/directory1. You can now read and copy files from the USB
directory.
Sharing Files
You can share files on the USB drive for a wide variety of business and recreational
purposes. The files can be Windows, Mac, or Linux file types NTFS, Ext 3, FAT 32,including
text, Word, PowerPoint, Excel, MP3, pictures, and multimedia files. USB drive applications
include:
•
Sharing multimedia with friends and family such as MP3 files, pictures, and other
multimedia with local and remote users.
•
Sharing resources on your network. You can store files in a central location so that you do
not have to power up a computer to perform local sharing. In addition, you can share files
between Macintosh, Linux, and Windows computers by using the USB drive as a
go-between across the systems.
•
Sharing files such as Word documents, PowerPoint presentations, and text files with
remote users.
A few common uses are described in the following sections.
Share Photos
You can create your own central storage location for photos and multimedia. This method
eliminates the need to log in to (and pay for) an external photo-sharing site.
To share files with your friends and family:
1.
Insert your USB drive into the USB port on the router either directly or with a USB cable.
Computers on your local area network (LAN) can automatically access this USB drive
using a web browser or Microsoft Networking.
Page 49 / 131
USB Storage
49
R6200v2 Smart WiFi Router
2.
If you want to specify read-only access or to allow access from the Internet, see
USB
Storage Device Network and Access Settings
on page
51.
Store Files in a Central Location for Printing
This scenario is for a family that has one high-quality color printer directly attached to a
computer, but not shared on the local area network (LAN). This family does not have a print
server.
•
One family member has photos on a Macintosh computer that she wants to print.
•
The photo-capable color printer is directly attached to a Windows computer, but not
shared on the network.
•
The Mac and the Windows computer are not visible to each other on the network.
To print photos from a Mac on the printer attached to a Windows computer:
•
On the Mac, access the USB drive by typing
\\readyshare
in the address field of a web
browser. Then copy the photos to the USB drive.
•
On the Window computer, use a web browser or Microsoft Networking to copy the files
from the USB drive to the computer. Then print the files.
Share Large Files over the Internet
Sending files that are larger than 5 MB can pose a problem for many email systems. The
router allows you to share large files such as PowerPoint presentations or .zip files over the
Internet. FTP can be used to download shared files from the router.
Sharing files with a remote colleague involves the following considerations:
•
The two user accounts are admin and guest. The password for admin is the same one
that you use to access the router. By default, it is
password
. The guest user account has
no password.
•
On the FTP site, the person receiving the files uses the guest user account and enters
the password. (FTP requires that you type something in the password field.)
•
Be sure to select the
FTP (via Internet)
check box in the USB Storage (Advanced
Settings) screen. This option supports both downloading and uploading of files.
Note:
You can enable the HTTP (via Internet) option on the USB Storage
(Advanced Settings) screen to share large files. This option supports
downloading files only.
Page 50 / 131
USB Storage
50
R6200v2 Smart WiFi Router
View a USB Device Attached to the Router
To view basic information about the USB storage device:
1.
Select
BASIC > ReadySHARE
.
By default, the Basic radio button is selected, and the screen displays a USB storage
device if it is attached to the router USB port.
If you logged in to the router before you connected your USB device, you might not see
your USB device in this screen. If this happens, log out and then log back in.
2.
(Optional) To view the files and folders on the USB device, click the network device name or
the share name.
3.
(Optional) To view more detail or to change the USB device settings, click the
Edit
button.
The USB Storage (Advanced Settings) screen displays. See
USB Storage Device
Network and Access Settings
on page
51.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top