1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. Orbi RBR50
    5. /
  5. 26
Page 126 / 150 Scroll up to view Page 121 - 125
Use VPN to Access Your Network
126
Orbi
WiFi System
For more information, see
Specify VPN Service in the Router
on page
120.
7.
Click the
FOR SMART PHONE
button to download the OpenVPN configuration files.
8.
On your Android device, download and install the OpenVPN Connect app from the Google
Play Store.
9.
On your computer, unzip the configuration files that you downloaded and send the files to
your Android device.
10.
Open the files on your Android device.
11.
Open the .ovpn file using the OpenVPN Connect app.
For more information about using OpenVPN on your Android device, visit
.
Use a VPN Tunnel on Your Windows Computer
After you set up the router to use VPN and install the OpenVPN application on your
computer, you can open a VPN tunnel from your computer to your router over the Internet.
For the VPN tunnel to work, the local LAN IP address of the remote router must use a
different LAN IP scheme from that of the local LAN where your VPN client computer is
connected. If both networks use the same LAN IP scheme, when the VPN tunnel is
established, you cannot access your home router or your home network with the OpenVPN
software.
The default LAN IP address scheme for the router is 192.x.x.x.The most common IP
schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x. If you experience a conflict, change the IP
scheme either for your home network or for the network with the client VPN computer. For
information about changing these settings, see Change the
Change the LAN TCP/IP Settings
on page
69.
To open a VPN tunnel:
1.
Launch the OpenVPN application with administrator privileges.
The OpenVPN icon displays in the Windows taskbar.
Page 127 / 150
Use VPN to Access Your Network
127
Orbi
WiFi System
Tip:
You can create a shortcut to the VPN program, then use the shortcut
to access the settings and select the
run as administrator
check
box.Then every time you use this shortcut, OpenVPN automatically
runs with administrator privileges.
2.
Right-click the
OpenVPN
icon.
3.
Select
Connect
.
The VPN connection is established.You can do the following:
•
Launch a web browser and log in to your router.
•
Use Windows file manager to access the router’s USB device and download files.
Use VPN to Access Your Internet Service at Home
When you’re away from home and you access the Internet, you usually use a local Internet
service provider. For example, at a coffee shop you might be given a code that lets you use
the coffee shop’s Internet service account to surf the web.
Nighthawk lets you use a VPN connection to access your own Internet service when you’re
away from home. You might want to do this if you travel to a geographic location that doesn’t
support all the Internet services that you use at home. For example, your Netflix account
might work at home but not in a different country.
Set Up VPN Client Internet Access in the Router
By default, the router is set up to allow VPN connections only to your home network, but you
can change the settings to allow Internet access. Accessing the Internet remotely through a
VPN might be slower than accessing the Internet directly.
To allow VPN clients to use your home Internet service:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
Page 128 / 150
Use VPN to Access Your Network
128
Orbi
WiFi System
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > VPN Service
.
The VPN Service page displays.
5.
Select the
Enable VPN Service
radio button.
6.
Scroll down to the Clients will use this VPN connection to access section, and select the
All
sites on the Internet & Home Network
radio button.
When you access the Internet with the VPN connection, instead of using a local Internet
service, you use the Internet service from your home network.
7.
Click the
Apply
button.
Your settings are saved.
8.
Click the
FOR WINDOWS
or
FOR MACOSX
button and download the configuration files for
your VPN clients.
9.
Unzip the configuration files and copy them to the folder where the VPN client is installed on
your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Programfiles\OpenVPN\config\
by default.
Block VPN Client Internet Access in the Router
By default, the router is set up to allow VPN connections only to your home network, not to
the Internet service for your home network. If you changed this setting to allow Internet
access, you can change it back.
To allow VPN clients to access only your home network:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > VPN Service
.
The VPN Service page displays.
Page 129 / 150
Use VPN to Access Your Network
129
Orbi
WiFi System
5.
Select the
Enable VPN Service
radio button.
6.
Scroll down to the Clients will use this VPN connection to access section, and select the
Home Network only
radio button.
This is the default setting.The VPN connection is only to your home network, not to the
Internet service for your home network.
7.
Click the
Apply
button.
Your settings are saved.
8.
Click the
FOR WINDOWS
or
FOR MAC0SX
button and download the configuration files for
your VPN clients.
9.
Unzip the configuration files and copy them to the folder where the VPN client is installed on
your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Programfiles\OpenVPN\config\
by default.
Use a VPN Tunnel to Access Your Internet Service at Home
To access your Internet service:
1.
Set up the router to allow VPN access to your Internet service.
See
Specify VPN Service in the Router
on page
120.
2.
On your computer, launch the OpenVPN application.
The OpenVPN icon displays in the Windows taskbar.
3.
Right-click the icon and select
Connect
.
4.
When the VPN connection is established, launch your Internet browser.
Page 130 / 150
130
10
10.
Troubleshooting
This chapter provides information to help you diagnose and solve problems you might
experience with your router. If you do not find the solution here, check the NETGEAR support
site at
support.netgear.com
for product and contact information.
This chapter includes the following sections:
•
Quick Tips
•
The Router and Satellite Do Not Sync
•
Cannot Log In to the Router
•
Cannot Access the Internet
•
WiFi Connectivity
•
Troubleshoot Your Network Using the Ping Utility

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top