1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. Orbi RBK50
    5. /
  5. 21
Page 101 / 151 Scroll up to view Page 96 - 100
Manage Your Network
101
Orbi
WiFi System
The BASIC Home page displays.
4.
Select
Attached Devices
.
The Attached Devices page displays
5.
In the Connected Satellites section, find your satellite’s IP address.
6.
Enter your satellite’s IP address in your web browser’s address bar.
A login window opens.
7.
Enter the same admin user name and password that you entered for the router.
The satellite’s status displays.
View and Manage Logs of Router Activity
The log is a detailed record of the websites you accessed or attempted to access and other
router actions. Up to 256
entries are stored in the log.
To view and manage logs:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Administration > Logs
.
The Logs page shows the following information:
Page 102 / 151
Manage Your Network
102
Orbi
WiFi System
•
Date and time
. The date and time the log entry was recorded.
•
Source IP
. The IP address of the initiating device for this log entry.
•
Target address
. The name or IP address of the website or news group visited or to
which access was attempted.
•
Action
. The action that occurred, such as whether Internet access was blocked or
allowed.
5.
To refresh the log page, click the
Refresh
button.
6.
To clear the log entries, click the
Clear Log
button.
7.
To email the log immediately, click the
Send Log
button.
View Devices Connected to the Network
You can view all computers or devices that are currently connected to your Orbi network.
To view devices connected to your network:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
Attached Devices
.
The Attached Devices page displays devices that are connected to the router and
satellite through Ethernet (using a wired connection) or connected to a WiFi band in the
WiFi network.
The IP address for devices can change because the router assigns an IP address to each
device when it joins the network. The unique MAC address for each device does not
change.
5.
To update this page, click the
Refresh
button.
View Satellites Connected to the Network
You can view the satellites that are connected to your Orbi network.
To view satellites connected to your network:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
Page 103 / 151
Manage Your Network
103
Orbi
WiFi System
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
Attached Devices
.
The Attached Devices page.
The satellites that are connected to your network, and their IP address and MAC address,
display in the Connected Satellites section.
5.
To update this page, click the
Refresh
button.
Monitor Internet Traffic
Traffic metering allows you to monitor the volume of Internet traffic that passes through the
router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
Page 104 / 151
Manage Your Network
104
Orbi
WiFi System
4.
Select
ADVANCED > Advanced Setup > Traffic Meter
.
5.
Select the
Enable Traffic Meter
check box.
6.
To control the volume of Internet traffic, use either the traffic volume control feature or the
connection time control feature:
•
Select the
Traffic volume control
by
radio button and then select one of the
following options:
-
No Limit
. No restriction is applied when the traffic limit is reached.
-
Download only
. The restriction is applied to incoming traffic only.
-
Both Directions
. The restriction is applied to both incoming and outgoing traffic.
•
Select the
Connection time control
radio button and enter the allowed hours in the
Monthly limit
field.
7.
If your ISP charges for extra data volume when you make a new connection, enter the extra
data volume in MB in the
Round up data volume for each connection by
field.
8.
In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
To start the traffic counter immediately, click the
Restart Counter Now
button.
9.
If you want the router to issue a warning message before the monthly limit of Mbytes or
hours is reached, in the Traffic Control section, enter a numeric value.
By default, the value is 0 and no warning message is issued.
10.
To stop the Internet connection when the limit is attained, select the
Disconnect and
disable the Internet connection
check box.
11.
Click the
Apply
button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
12.
To update the Internet Traffic Statistics section, click the
Refresh
button.
13.
To display more information about the data traffic on your router and to change the poll
interval, click the
Internet Traffic Status
button.
Page 105 / 151
Manage Your Network
105
Orbi
WiFi System
Manage the Router Configuration File
The configuration settings of the router are stored within the router in a configuration file. You
can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.
Back Up Settings
To back up the router’s configuration settings:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Administration >
Backup Settings
.
5.
Click the
Back Up
button.
6.
Specify a location on your network.
A copy of the current settings is saved in the location you specified.
Erase the Current Configuration Settings
You can erase the current configuration and restore the factory default settings. You might
want to do this if you move the router to a different network. (See
Factory Settings for Orbi
Routers
on page
139.)

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top