Install the Printer Driver and Cable the Printer
Some USB printer manufacturers (for example, HP and Lexmark) request that you do not connect the USB cable
until the installation software prompts you to do so.
To install the driver and cable the printer:
1.
On each computer on your network that shares the USB printer, install the driver software for the USB printer.
If the printer driver is not installed, contact the printer manufacturer.
2.
Use a USB printer cable to connect the USB printer to a modem router USB port on the left side panel.
Download the ReadySHARE Printer Utility
The utility works on Windows computers, Mac computers, smartphones, and tablets.
To download the ReadySHARE Printer utility:
1.
Visit
netgear.com/readyshare
.
2.
Scroll down to the Print From the Comfort of Your Home Network section at the bottom of the page.
3.
Click one of the following links:
•
Download PC installer and get started
. This is the utility for Windows computers.
•
Download Mac installer and get started
. This is the utility for MAC computers.
•
Download the genie App and get started
. This is the utility for smartphones and tablets.
4.
Follow the onscreen instructions to download the ReadySHARE Printer utility setup file.
Install the ReadySHARE Printer Utility
You must install the ReadySHARE Printer utility on each computer that will share the printer. After you install it, the
utility displays as NETGEAR USB Control Center on your computer.
Share a USB Printer
183
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800