1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. Nighthawk X4S D7800
    5. /
  5. 11
Page 51 / 299 Scroll up to view Page 46 - 50
4.
Select
Internet
.
The Internet Setup page displays.
5.
From the
Select Country
menu, select the country in which you use the modem router.
The
Select Country
menu is not available in all countries and might be masked out.
6.
From the
Select Internet Service Provider
menu, select the Internet service provider (ISP) that you are using.
If your ISP is not in the menu, select
Other
.
7.
From the
Transfer Mode
menu, select
ADSL(ATM)
.
8.
From the
DSL Mode
menu, select the ADSL mode that your ISP provided you:
•
Auto
. The modem router detects the DSL mode automatically. (This is the default setting.)
•
ADSL
. Legacy version of ADSL.
•
ADSL2
. Legacy version of ADSL2.
•
ADSL2+
. ADSL2+ provides the fastest downstream rates and can interoperate with ADSL2 and ADSL.
9.
Make sure that the
Enable This Interface
check box is selected.
For some ISPs, you can select the IPTV virtual interface from the menu above the
Enable
This Interface
check box. If you are specifying the settings for the IPTV virtual interface,
select
IPTV
from the menu. However, first specify the settings for the Internet virtual interface
(which is the default interface) before you specify the settings for the IPTV virtual interface.
Note
10.
Scroll down to the Does your Internet connection require a login? section and select the
No
radio button.
Manage the Internet Settings Manually
51
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 52 / 299
The following figure shows the settings that display when you configure an ADSL connection without a login.
11.
Enter the ADSL settings as described in the following table.
Manage the Internet Settings Manually
52
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 53 / 299
Description
Field
Select
LLC-BASED
or
VC-BASED
, as indicated by your ISP.
The multiplexing method can either be virtual circuit (VC) based or logical link control
(LLC) based.
Multiplexing Method
Enter a number between 0 and 255 for the virtual circuit number for the virtual path
identifier (VPI), as indicated by your ISP.
If your ISP did not provide you with a VPI setting, leave the default setting (8). The
VPI might be required not only for a VC-based connection but also for an LLC-based
connection.
VPI
Enter a number between 32 and 65535 for the virtual circuit number for the virtual
channel identifier (VCI), as indicated by your ISP.
If your ISP did not provide you with a VCI setting, leave the default setting (35). The
VCI might be required not only for a VC-based connection but also for an LLC-based
connection.
VCI
Select the
Use VLANID
check box and enter the VLAN ID, as indicated by your
ISP.
A VLAN ID might be required if you subscribe to both Internet service and a service
such as IPTV. If your ISP did not provide you with a VLAN ID, leave the
Use VLANID
check box cleared, which is the default setting.
Use VLANID
If your ISP provided you with a VLAN ID and a priority value, enter the priority value,
which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your ISP did
not provide you with a priority value, leave the default setting (0).
Priority (0 ~ 7)
If you are specifying the settings for the virtual IPTV interface and your ISP informed
you that you must use bridge mode, select the
Bridge Mode
check box. For more
information about bridge mode, see
Enable Bridge Mode for IPTV Devices
on page
192.
Bridge Mode
(IPTV interface only)
Enter the account name, as indicated by your ISP. This name might also be called
the host name.
If your ISP did not provide you with an account name or host name, leave the default
setting.
Account Name
Enter the domain name, as indicated by your ISP.
If your ISP did not provide you with a domain name, leave this field blank.
Domain Name
Internet IP Address
Your ISP uses DHCP to assign your IP address.Your ISP automatically assigns
these addresses.
Get Dynamically from ISP
Manage the Internet Settings Manually
53
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 54 / 299
Description
Field
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for static IP address service. The gateway is the ISP router to which
your modem router connects.
Use Static IP Address
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for IPoA service. The gateway is the ISP router to which your modem
router connects.
Use IP over ATM (IPoA)
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Your ISP uses DHCP to assign your DNS servers.Your ISP automatically assigns
this address.
Get Automatically from ISP
If you know that your ISP does not automatically transmit DNS addresses to the
modem router during login, select this option and enter the IP address of your ISP
primary DNS server. If secondary and tertiary DNS server addresses are available,
enter them also.
Use These DNS Servers
Router MAC Address
The Ethernet MAC address that the modem router uses on the Internet port. Some ISPs register the MAC address of the
network interface card in your computer when your account is first opened. They accept traffic only from the MAC address
of that computer.
This feature allows your modem router to use your computer’s MAC address (also called cloning).
Use the default MAC address.
Use Default Address
The modem router captures and uses the MAC address of the computer that you
are now using.You must use the one computer that is registered by the ISP.
Use Computer MAC Address
Enter the MAC address that you want to use. By default, the field displays the MAC
address of the Internet port.
Use This MAC Address
DHCP Options
Enter the vendor class identifier (VCI) string, as indicated by your ISP.
If your ISP did not provide you with a VCI string, leave this field blank.
Vendor Class Identifier String (option
60)
Enter the client identifier (client ID) string, as indicated by your ISP.
If your ISP did not provide you with a client ID string, leave this field blank.
Client Identifier String (option 61)
12.
Click the
Apply
button.
Manage the Internet Settings Manually
54
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 55 / 299
Your settings are saved.
13.
Click the
Test
button to test your Internet connection.
If the NETGEAR website does not display within one minute, see
Troubleshoot the Internet Connection
on page
286.
Specify an ADSL Connection With a Login and PPPoA or
PPPoE Service
If you want to manually configure the ADSL connection settings, use the information that your ISP gave you to log
in and connect to your Internet service. If you cannot find this information, contact your ISP. Entering incorrect
information might prevent the modem router from connecting to the Internet.
To view or specify the settings for an ADSL Internet connection that requires a login and uses a
PPPoE or PPPoA service:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter
.
A login window opens.
3.
Enter the modem router user name and password.
The user name is
admin
.The default password is
password
.The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select
Internet
.
The Internet Setup page displays.
5.
From the
Select Country
menu, select the country in which you use the modem router.
The
Select Country
menu is not available in all countries and might be masked out.
6.
From the
Select Internet Service Provider
menu, select the Internet service provider (ISP) that you are using.
If your ISP is not in the menu, select
Other
.
7.
From the
Transfer Mode
menu, select
ADSL(ATM)
.
8.
From the
DSL Mode
menu, select the ADSL mode that your ISP provided you:
•
Auto
. The modem router detects the DSL mode automatically. (This is the default setting.)
•
ADSL
. Legacy version of ADSL.
•
ADSL2
. Legacy version of ADSL2.
•
ADSL2+
. ADSL2+ provides the fastest downstream rates and can interoperate with ADSL2 and ADSL.
9.
Make sure that the
Enable This Interface
check box is selected.
Manage the Internet Settings Manually
55
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top