Page 181 / 183
Scroll up to view Page 176 - 180
Factory Settings
You can return the
router
to its factory settings. Use the end of a paper clip or a similar object to press
and hold the
Reset
button on the back of the router for at least seven seconds. The
router
resets and
returns to the factory configuration settings shown in the following table.
Table 3. Factory default settings
Default Behavior
Feature
www.routerlogin.com or www.routerlogin.net
User login URL
Router
login
admin
User name (case-sensitive)
password
Login password (case-sensitive)
Use default hardware address
WAN MAC address
Internet
connection
1500
WAN MTU size
AutoSensing
Port speed
192.168.1.1
LAN IP
Local
network
(LAN)
255.255.255.0
Subnet mask
Enabled
DHCP server
192.168.1.2 to 192.168.1.254
DHCP range
Pacific time
Time zone
192.168.1.2
DHCP starting IP address
192.168.1.254
DHCP ending IP address
Disabled
DMZ
Disabled
Time adjusted for daylight saving time
Disabled
SNMP
Disabled (except traffic on port 80, the HTTP
port)
Inbound (communications coming in from
the Internet)
Firewall
Supplemental Information
181
Page 182 / 183
Default Behavior
Feature
Enabled (all)
Outbound (communications going out to
the Internet)
Disabled
Source MAC filtering
Enabled
Wireless communication
Wireless
See router label
SSID name
WPA2-PSK (AES)
Security
Enabled
Broadcast SSID
Auto
1
Transmission speed
United States in the US; otherwise, varies
by region
Country/region
Auto for 2.4GHz, CH 44 for WW SKU and
CH 153 for North America SKU
RF channel
Up to 600 Mbps at 2.4 GHz, 1733 Mbps at
5 GHz
Operating mode
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Technical Specifications
Table 4. R7500v2 router specifications
Description
Feature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS,
UPnP, and SMB
Data and routing protocols
Supplemental Information
182
Page 183 / 183
Description
Feature
Power adapter
•
North America: 100-240V, 50/60 Hz input
•
UK, Australia: 100-240V, 50/60 Hz, input
•
Europe: 100-240V, 50/60 Hz input
•
All regions (output): 12V/3.5A DC output
11.22 x 7.26 x 1.97 in. (285 x 184.5 x 50 mm)
Dimensions
1.65 lb (750 g)
Weight
0° to 40°C
(32º to 104ºF)
Operating temperature
90% maximum relative humidity, noncondensing
Operating humidity
FCC Part 15 Class B
Electromagnetic emissions
VCCI Class B
EN 55 022 (CISPR 22), Class B C-Tick N10947
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
LAN
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
WAN
Maximum wireless signal rate complies with the IEEE 802.11
standard.
2
Wireless
Auto Rate Sensing
Radio data rates
Data encoding standards
•
IEEE® 802.11 b/g/n 2.4 GHz–256 QAM support
•
IEEE® 802.11 a/n/ac 5.0 GHz
Limited by the amount of wireless network traffic generated by each
node (typically 50–70 nodes).
Maximum computers per wireless
network
AC2350 WiFi
3
Operating frequency range
Supplemental Information
183
19216811.live