1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. Nighthawk R7000
    5. /
  5. 6
Page 26 / 169 Scroll up to view Page 21 - 25
Specify Your Internet Settings
26
Nighthawk AC1900
Smart
WiFi
Router Model
R7000
•
Use These DNS Servers
. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
14.
In the Router MAC Address section of the screen, select one of the following radio buttons:
•
Use Default Address
. Use the default MAC address.
•
Use Computer MAC Address
. The router captures and uses the MAC address of the
computer that you are now using. You must use the one computer that the ISP allows.
•
Use This MAC Address
. Enter the MAC address that you want to use.
15.
Click the
Apply
button.
Your settings are saved.
16.
Click the
Test
button to test your Internet connection.
If the NETGEAR website does not display within one minute, see
Chapter 14,
Troubleshooting
.
Specify IPv6 Internet Connections
You can set up an IPv6 Internet connection if genie does not detect it automatically.
To set up an IPv6 Internet connection:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
..
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
5.
In the
Internet Connection Type
list, select the IPv6 connection type.
Your Internet service provider (ISP) can provide this information.
Page 27 / 169
Specify Your Internet Settings
27
Nighthawk AC1900
Smart
WiFi
Router Model
R7000
•
If your ISP did not provide details, you select
IPv6 Tunnel
. If you are not sure, select
Auto Detect
so that the router detects the IPv6 type that is in use. If your Internet
connection does not use PPPoE, DHCP, or fixed, but is IPv6, select
Auto Config
. For
more information about IPv6 Internet connection, see the following sections.
6.
Click the
Apply
button.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero
or omit it. The following errors invalidate an IPv6 address:
•
More than eight groups of hexadecimal quartets
•
More than four hexadecimal characters in a quartet
•
More than two colons in a row
Auto Detect
To set up an IPv6 Internet connection through auto detection:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
5.
In the
Internet Connection Type
list, select
Auto Detect
.
Page 28 / 169
Specify Your Internet Settings
28
Nighthawk AC1900
Smart
WiFi
Router Model
R7000
The screen adjusts:
The router automatically detects the information in the following fields:
•
Connection Type
. This field indicates the connection type that is detected.
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
6.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
7.
(Optional) Select the
Use This Interface ID
check box and specify the interface ID to be
used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
8.
Click the
Apply
button.
IPv6 Auto Config
To set up an IPv6 Internet connection through auto configuration:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
Page 29 / 169
Specify Your Internet Settings
29
Nighthawk AC1900
Smart
WiFi
Router Model
R7000
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
5.
In the
Internet Connection Type
list, select
Auto Config
.
The screen adjusts:
The router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
6.
(Optional) In the
DHCP User Class (If Required)
field, enter a host name.
Most people can leave this field blank, but if your ISP has given you a specific host name,
enter it here.
7.
(Optional) In the
DHCP Domain Name (If Required)
field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the
IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz
as the domain name. If your ISP provided a domain name, type it in this field. For
example, Earthlink Cable might require a host name of home, and Comcast sometimes
supplies a domain name.
Page 30 / 169
Specify Your Internet Settings
30
Nighthawk AC1900
Smart
WiFi
Router Model
R7000
8.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
9.
(Optional) Select the
Use This Interface ID
check box and specify the interface ID that you
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
10.
Click the
Apply
button.
IPv6 6to4 Tunnel
The remote relay router is the router to which your router creates a 6to4 tunnel. Make sure
that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the
IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
5.
In the
Internet Connection Type
list, select
6to4 Tunnel
.

Rate

4.7 / 5 based on 3 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top