NETGEAR Nighthawk R6700 Router Manual PDF (Setup & Configuration Guide)

Page 36 / 180 Scroll up to view Page 31 - 35

Specify Your Internet Settings

36

Nighthawk AC1750

Smart

WiFi

Router

7.

(Optional) In the

Domain Name (If Required)

field, enter a domain name.

You can type the domain name of your IPv6 ISP. Do not enter the domain name for the

IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz

as the domain name. If your ISP provided a domain name, type it in this field. For

example, Earthlink Cable might require a host name of home, and Comcast sometimes

supplies a domain name.

8.

Select an IP Address Assignment radio button:

•

Use DHCP Server

. This method passes more information to LAN devices but some

IPv6 systems might not support the DHCv6 client function.

•

Auto Config

. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your home

network (the LAN).

9.

(Optional) Select the

Use This Interface ID

check box and specify the interface ID to be

used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

10.

Click the

Apply

button.

Your settings are saved.

Set Up an IPv6 PPPoE Internet Connection



To set up a PPPoE IPv6 Internet connection:

1.

Launch an Internet browser from a computer or wireless device that is connected to the

network.

2.

Type

http://www.routerlogin.net

or

http://www.routerlogin.com

.

A login screen displays.

3.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4.

Select

ADVANCED > Advanced Setup > IPv6

.

The IPv6 screen displays.

5.

In the

Internet Connection Type

list, select

PPPoE

.

Page 37 / 180

Specify Your Internet Settings

37

Nighthawk AC1750

Smart

WiFi

Router

The screen adjusts:

The router automatically detects the information in the following fields:

•

Router’s IPv6 Address on WAN

. This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the

length of the prefix, which is also indicated by the underline (_) under the IPv6

address. If no address is acquired, the field displays Not Available.

•

Router’s IPv6 Address on LAN

. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6.

In the

Login

field, enter the login information for the ISP connection.

This is usually the name that you use in your email address. For example, if your main

mail account is [email protected], you would type JerAB in this field. Some ISPs (like

Mindspring, Earthlink, and T-DSL) require that you use your full email address when you

log in. If your ISP requires your full email address, type it in this field.

7.

In the

Password

field, enter the password for the ISP connection.

8.

In the

Service Name

field, enter a service name.

If your ISP did not provide a service name, leave this field blank.

Note:

The default setting of the

Connection Mode

field is

Always On

to

provide a steady IPv6 connection. The router never terminates the

connection. If the connection is terminated, for example, when the

modem is turned off, the router attempts to reestablish the connection

immediately after the PPPoE connection becomes available again.

9.

Select an IP Address Assignment radio button:

•

Use DHCP Server

. This method passes more information to LAN devices but some

IPv6 systems might not support the DHCv6 client function.

•

Auto Config

. This is the default setting.

Page 38 / 180

Specify Your Internet Settings

38

Nighthawk AC1750

Smart

WiFi

Router

This setting specifies how the router assigns IPv6 addresses to the devices on your home

network (the LAN).

10.

(Optional) Select the

Use This Interface ID

check box and specify the interface ID to be

used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

11.

Click the

Apply

button.

Your settings are saved.

Maximum Transmission Unit

The maximum transmission unit (MTU) is the largest data packet a network device transmits.

When one network device communicates across the Internet with another, the data packets

travel through many devices along the way. If a device in the data path uses a lower MTU

setting than the other devices, the data packets must be split or “fragmented” to

accommodate the device with the smallest MTU.

The best MTU setting for NETGEAR equipment is often the default value. In some situations,

changing the value fixes one problem but causes another. Leave the MTU unchanged unless

one of these situations occurs:

•

You experience problems connecting to your ISP or other Internet service, and the

technical support of either the ISP or NETGEAR recommends changing the MTU setting.

These web-based applications might require an MTU change:

-

A secure website that does not open, or displays only part of a web page

-

Yahoo email

-

MSN portal

-

America Online’s DSL service

•

You use VPN and have severe performance problems.

•

You used a program to optimize MTU for performance reasons, and now you have

connectivity or performance problems.

Note:

An incorrect MTU setting can cause Internet communication

problems. For example, you might not be able to access certain

websites, frames within websites, secure login pages, or FTP or POP

servers.

Page 39 / 180

Specify Your Internet Settings

39

Nighthawk AC1750

Smart

WiFi

Router

Change the MTU Size



To change the MTU size:

1.

Launch an Internet browser from a computer or wireless device that is connected to the

network.

2.

Type

http://www.routerlogin.net

or

http://www.routerlogin.com

.

A login screen displays.

3.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4.

Select

ADVANCED > Setup > WAN Setup

.

5.

In the

MTU Size

field, enter a value from 64 to 1500.

6.

Click the

Apply

button.

Your change is saved.

Common MTU Sizes

If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are

willing to experiment, you can gradually reduce the MTU from the maximum value of 1500

until the problem goes away. The following table describes common MTU sizes and

applications.

Table 2.

Common MTU sizes

MTU

Application

1500

The largest Ethernet packet size. This setting is typical for connections that do not use

PPPoE or VPN, and is the default value for NETGEAR routers, adapters, and switches.

1492

Used in PPPoE environments.

1472

Maximum size to use for pinging. (Larger packets are fragmented.)

Page 40 / 180

Specify Your Internet Settings

40

Nighthawk AC1750

Smart

WiFi

Router

1468

Used in some DHCP environments.

1460

Usable by AOL if you do not use large email attachments, for example.

1436

Used in PPTP environments or with VPN.

1400

Maximum size for AOL DSL.

576

Typical value to connect to dial-up ISPs.

Table 2.

Common MTU sizes

(continued)

MTU

Application

Rate

Popular NETGEAR Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share