19216811.liveTroubleshooting
91
LTE Broadband 11n Wireless Router MBR1515
Problems with Date and Time
The Email screen displays the current date and time of day. The router uses the Network
Time Protocol (NTP) to obtain the current time from one of several network time servers on
the Internet. Each entry in the log is stamped with the date and time of day. Problems with the
date and time function can include the following:
•
Date shown is January 1, 2000.
Cause: The router has not yet successfully reached a network time server. Check that
your Internet access settings are configured correctly. If you have completed configuring
the router, wait at least 5 minutes, and check the date and time again.
•
Time is off by one hour.
Cause: The router does not automatically sense daylight saving time. On the Schedule
screen, select an appropriate time zone and set or clear the
Automatically adjust for
Daylight Savings Time
check box.
Restore the Default Configuration and Password
This section explains how to restore the factory default configuration settings, changing the
router’s admin password to
password
and the IP address to
www.routerlogin.net
. You can
erase the current configuration and restore factory defaults in two ways:
•
Use the Erase feature (see
Erase
on page 55).
•
Press the
Restore Factory Settings
button on the bottom of the router for 6 seconds.
Use this method for cases when the administration password or IP address is not known.
The factory default settings are shown in
Factory Default Settings
on page 93.