Reference Manual for the ProSafe Wireless 802.11g

Firewall/Print Server Model FWG114P v2

Wireless Configuration

4-13

201-10301-02, May 2005

2.

Click

Wireless Settings

in the main menu of the FWG114P v2.

Figure 4-6:

Wireless Settings menu (WPA with Radius)

3.

Select

WPA with Radius

on the pulldown menu. The WPA with Radius menu will open.

Encryption

: There is no choice for encryption; this is displayed for your information. For

WPA with Radius, TKIP is used.

4.

Enter the Radius settings.

•

Primary Server Name/IP Address

: This field is required. Enter the name or IP address

of the primary Radius Server on your LAN.

•

Secondary Radius Server Name/IP Address

: This field is optional. If you have a

Secondary Radius Server on your LAN, enter its name or IP address here.

Reference Manual for the ProSafe Wireless 802.11g

Firewall/Print Server Model FWG114P v2

4-14

Wireless Configuration

201-10301-02, May 2005

•

Radius Port

: Enter the port number used for connecting to the Radius Server.

•

Shared Key

: Enter the desired value for the Shared Key. This must match the value used

on the Radius server.

•

Radius Accounting

: Enable Radius Accounting

Enable this if you want to use the Radius Accounting system. If enabled, the following

fields must be correct:

•

Radius Accounting Port

: Enter the port number used for Accounting data on the Radius

Server.

•

Update Report

: Enable this if you wish to have this AP send Accounting update

messages to the Radius accounting server periodically.

If enabled, enter the desired Update Report interval in the field provided.

5.

Click

Apply

to save your settings.

How to Configure WPA2 with Radius

Note

: Not all wireless adapters support WPA2. Furthermore, client software is required on the

client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that

supports WPA2. Nevertheless, the wireless adapter hardware and driver must also support WPA2.

Consult the product document for your wireless adapter and WPA2 client software for instructions

on configuring WPA2 settings.

To configure WPA2 with Radius, follow these steps:

1.

Log in at the default LAN address of

with the default user name of

admin

and default password of

password

, or using whatever LAN address and password you have

set up.

Reference Manual for the ProSafe Wireless 802.11g

Firewall/Print Server Model FWG114P v2

Wireless Configuration

4-15

201-10301-02, May 2005

2.

Click

Wireless Settings

in the main menu of the FWG114P v2.

Figure 4-7:

Wireless Settings menu (WPA2 with Radius)

3.

Select

WPA2 with Radius

on the pulldown menu. The WPA2 with Radius menu will open.

Encryption

: There is no choice for encryption; this is displayed for your information. For

WPA2 with Radius, AES is used.

4.

Enter the Radius settings.

•

Primary Server Name/IP Address

: This field is required. Enter the name or IP address

of the primary Radius Server on your LAN.

Reference Manual for the ProSafe Wireless 802.11g

Firewall/Print Server Model FWG114P v2

4-16

Wireless Configuration

201-10301-02, May 2005

•

Secondary Radius Server Name/IP Address

: This field is optional. If you have a

Secondary Radius Server on your LAN, enter its name or IP address here.

•

Radius Port

: Enter the port number used for connecting to the Radius Server.

•

Shared Key

: Enter the desired value for the Shared Key. This must match the value used

on the Radius server.

•

Radius Accounting

: Enable Radius Accounting

Enable this if you want to use the Radius Accounting system. If enabled, the following

fields must be correct:

•

Radius Accounting Port

: Enter the port number used for Accounting data on the Radius

Server.

•

Update Report

: Enable this if you wish to have this AP send Accounting update

messages to the Radius accounting server periodically.

If enabled, enter the desired Update Report interval in the field provided.

5.

Click

Apply

to save your settings.

How to Configure WPA and WPA2 with Radius

Note

: Not all wireless adapters support WPA and WPA2. Furthermore, client software is required

on the client. Windows XP and Windows 2000 with Service Pack 3 do include the client software

that supports WPA and WPA2. Nevertheless, the wireless adapter hardware and driver must also

support WPA and WPA2. Consult the product document for your wireless adapter and WPA and

WPA2 client software for instructions on configuring WPA and WPA2 settings.

To configure WPA and WPA2 with Radius, follow these steps:

1.

Log in at the default LAN address of

with the default user name of

admin

and default password of

password

, or using whatever LAN address and password you have

set up.

Reference Manual for the ProSafe Wireless 802.11g

Firewall/Print Server Model FWG114P v2

Wireless Configuration

4-17

201-10301-02, May 2005

2.

Click

Wireless Settings

in the main menu of the FWG114P v2.

Figure 4-8:

Wireless Settings menu (WPA and WPA2 with Radius)

3.

Select

WPA and WPA2 with Radius

on the pulldown menu. The WPA and WPA2 with

Radius menu will open.

Encryption

: There is no choice for encryption; this is displayed for your information. For

WPA and WPA2 with Radius, WPA clients must use TKIP, and WPA2 clients must use AES.

4.

Enter the Radius settings.

•

Primary Server Name/IP Address

: This field is required. Enter the name or IP address

of the primary Radius Server on your LAN.