1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. FVS318N
    5. /
  5. 57
Page 281 / 414 Scroll up to view Page 276 - 280
Virtual Private Networking Using SSL Connections
281
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
5.
Click
Apply
to save your settings. The policy is added to the List of SSL VPN Policies table
on the Policies screen. The new policy goes into effect immediately.
Apply
Policy to?
(continued)
IP Address
(continued)
Permission
From the drop-down list, select
Permit
or
Deny
to specify
whether the policy permits or denies access.
IP Network
Policy Name
A descriptive name of the SSL VPN policy for identification and
management purposes.
IP Address
The network IPv4 or IPv6 network address to which the SSL
VPN policy is applied.
IPv4 screen
only
Subnet
Mask
The IPv4 network subnet mask to which the SSL
VPN policy is applied.
IPv6 screen
only
IPv6 Prefix
Length
The IPv6 prefix length that apples to the network
to which the SSL VPN policy is applied.
Port Range /
Port Number
A port (fill in the Begin field) or a range of ports (fill in the Begin
and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank to
apply the policy to all traffic.
Service
From the drop-down list, select the service to which the SSL
VPN policy is applied:
•
VPN Tunnel
. The policy is applied only to a VPN tunnel.
•
Port Forwarding
. The policy is applied only to port
forwarding.
•
All
. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission
From the drop-down list, select
Permit
or
Deny
to specify
whether the policy permits or denies access.
All
Addresses
Policy Name
A descriptive name of the SSL VPN policy for identification and
management purposes.
Port Range /
Port Number
A port (fill in the Begin field) or a range of ports (fill in the Begin
and End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank to
apply the policy to all traffic.
Service
From the drop-down list, select the service to which the SSL
VPN policy is applied:
•
VPN Tunnel
. The policy is applied only to a VPN tunnel.
•
Port Forwarding
. The policy is applied only to port
forwarding.
•
All
. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission
From the drop-down list, select
Permit
or
Deny
to specify
whether the policy permits or denies access.
Table 69.
Add SSL VPN Policy screen settings (continued)
Setting
Description
Page 282 / 414
Virtual Private Networking Using SSL Connections
282
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Note:
If you have configured SSL VPN user policies, make sure that
secure HTTP remote management is enabled (see
Configure
Remote Management Access
on page 322). If secure HTTP remote
management is not enabled, all SSL VPN user connections are
disabled.
To edit an SSL VPN policy:
1.
On the Policies screen (see
Figure 168
on page 278), click the
Edit
button in the Action
column for the SSL VPN policy that you want to modify. The Edit SSL VPN Policy
screen displays. This screen is identical to the Add SSL VPN Policy screen (see
previous screen).
2.
Modify the settings as explained in the previous table.
3.
Click
Apply
to save your settings.
To delete one or more SSL VPN policies:
1.
On the Policies screen (see
Figure 168
on page 278), select the check box to the left of
each SSL VPN policy that you want to delete, or click the
Select All
table button to
select all policies.
2.
Click the
Delete
table button.
Access the New SSL Portal Login Screen
All screens that you can access from the SSL VPN menu of the web management interface
display a user portal link in the upper right of the screen, above the menu bars (
).
When you click the
User Portal
link, the SSL VPN default portal opens (see
Figure 172
on
page 284). This user portal is not the same as the new SSL portal login screen that you
defined with the help of the SSL VPN Wizard.
To open the new SSL portal login screen:
1.
Select
VPN > SSL VPN > Portal Layouts
.
The Portal Layouts screen displays (for IPv4,
see
Figure 160
on page 263; for IPv6, see
Figure 161
on page 263).
2.
In the Portal URL field of the List of Layouts table, select the URL that ends with the portal
layout name that you defined with the help of the SSL VPN Wizard. The new SSL portal
login screen displays:
Page 283 / 414
Virtual Private Networking Using SSL Connections
283
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 171.
3.
Enter the user name and password that you just created with the help of the SSL VPN
Wizard.
4.
Click
Login
. The User Portal screen displays. The format of the User Portal screen depends
on the settings that you selected on the Add Portal Layout screen (see
Create the Portal
Layout
on page 262):
•
Figure 172,
shows the User Portal screen with both a VPN Tunnel and a Port
Forwarding menu option.
•
Figure 173,
show the User Portal screen with a Port Forwarding menu option only.
The VPN Tunnel menu option is not displayed.
Page 284 / 414
Virtual Private Networking Using SSL Connections
284
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 172.
Figure 173.
The User Portal screen displays a simple menu that, depending on the resources
allocated, provides the SSL user with the following menu selections:
•
VPN Tunnel
. Provides full network connectivity.
•
Port Forwarding
. Provides access to the network services that you defined as
described in
Configure Applications for Port Forwarding
on page 267.
Page 285 / 414
Virtual Private Networking Using SSL Connections
285
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
•
Change Password
. Allows the user to change his or her password.
•
Support
. Provides access to the NETGEAR website.
Note:
The first time that a user attempts to connect through the VPN
tunnel, the NETGEAR SSL VPN tunnel adapter is installed; the first
time that a user attempts to connect through the port-forwarding
tunnel, the NETGEAR port-forwarding engine is installed.
View the SSL VPN Connection Status
To view the status of current SSL VPN tunnels, select
VPN > Connection Status > SSL VPN
Connection Status
.
The SSL VPN Connection Status screen displays:
Figure 174.
The active user’s name, group, and IP address are listed in the table with a time stamp
indicating the time and date that the user connected.
To disconnect an active user, click the
Disconnect
table button to the right of the user’s table
entry.
View the SSL VPN Log
To display the SSL VPN log:
Select
Monitoring > VPN Logs > SSL VPN Logs.
The SSL VPN Logs screen displays:

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top