1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. FVS114
    5. /
  5. 5
Page 21 / 212 Scroll up to view Page 16 - 20
Reference Manual for the ProSafe VPN Firewall FVS114
Introduction
2-5
202-10098-01, April 2005
Package Contents
The product package should contain the following items:
•
FVS114 ProSafe VPN Firewall.
•
AC power adapter.
•
Category 5 (Cat 5) Ethernet cable.
•
Installation Guide.
•
Resource CD (240-10207-01) for ProSafe VPN Firewall
, including:
—
This guide.
—
Application Notes and other helpful information.
•
Registration and Warranty Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the firewall for repair.
The FVS114 Front Panel
The front panel of the FVS114 VPN Firewall contains the status LEDs described below.
Figure 2-1:
FVS114 front panel
You can use some of the LEDs to verify connections. Viewed from left to right,
Table 2-1
describes the LEDs on the front panel of the firewall. These LEDs are green when lit.
PWR
Internet
LOCAL Ports
Test
Page 22 / 212
Reference Manual for the ProSafe VPN Firewall FVS114
2-6
Introduction
202-10098-01, April 2005
The FVS114 Rear Panel
The rear panel of the FVS114 VPN Firewall contains the port connections listed below.
Figure 2-2:
FVS114 rear panel
Viewed from left to right, the rear panel contains the following features:
•
Factory default reset push button
•
Eight Ethernet LAN ports
•
Internet Ethernet WAN port for connecting the firewall to a cable or DSL modem
Table 2-1.
LED Descriptions
LED Label
Activity
Description
PWR
On
Power is supplied to the firewall.
TEST
On
Off
The system is initializing.
The system is ready and running.
INTERNET
100 (100 Mbps)
On
Off
The Internet (WAN) port is operating at 100 Mbps.
The Internet (WAN) port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
LOCAL
100 (100 Mbps)
On
Off
The Local port is operating at 100 Mbps.
The Local port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
The Local port has detected a link with an attached device.
Data is being transmitted or received by the Local port.
FACTORY DEFAULTS
Reset Button
DC Power
INTERNET
Port
LOCAL
Ports
Page 23 / 212
Reference Manual for the ProSafe VPN Firewall FVS114
Introduction
2-7
202-10098-01, April 2005
•
DC power input
•
ON/OFF switch
NETGEAR-Related Products
NETGEAR products related to the FVS114 are listed in the following table:
NETGEAR Product Registration, Support, and
Documentation
Register your product at
. Registration is required before you
can use our telephone support service.
Product updates and Web support are always available by going to:
.
Table 2-2.
NETGEAR-Related Products
Category
Wireless
Wired
Notebooks
WAG511 108 Mbps Dual Band PC Card
WG511T 108 Mbps PC Card
WG511 54 Mbps PC Card
WG111 54 Mbps USB 2.0 Adapter
MA521 802.11b PC Card
FA511 CardBus Adapter
FA120 USB 2.0 Adapter
Desktops
WAG311 108 Mbps Dual Band PCI Adapter
WG311T 108 Mbps PCI Adapter
WG311 54 Mbps PCI Adapter
WG111 54 Mbps USB 2.0 Adapter
FA311 PCI Adapter
FA120 USB 2.0 Adapter
VPN Firewalls
—
FVX538 ProSafe VPN Firewall 200
FVS338 ProSafe VPN Firewall 50
FVS124G ProSafe VPN Firewall 25
FVS318 ProSafe VPN Firewall 8
PDAs
MA701 802.11b Compact Flash Card
Antennas and
Accessories
ANT24O5 5 dBi Antenna
ANT2409 Indoor/Outdoor 9 dBi Antenna
ANT24D18 Indoor/Outdoor 18 dBi Antenna
Antenna Cables–1.5, 3, 5, 10, and 30 m lengths
VPN01L and VPN05L ProSafe VPN Client Software
Page 24 / 212
Reference Manual for the ProSafe VPN Firewall FVS114
2-8
Introduction
202-10098-01, April 2005
Documentation is available on the
Resource CD
and at
.
When the VPN firewall router is connected to the Internet, click the
Knowledge Base
or the
Documentation
link under the Web Support menu to view support information or the
documentation for the VPN firewall router.
Page 25 / 212
Connecting the Firewall to the Internet
3-1
202-10098-01, April 2005
Chapter 3
Connecting the Firewall to the Internet
This chapter describes how to set up the firewall on your LAN, connect to the Internet, perform
basic configuration of your FVS114 ProSafe VPN Firewall using the Setup Wizard, or how to
manually configure your Internet connection.
Follow these instructions to set up your firewall.
Prepare to Install Your FVS114 ProSafe VPN Firewall
•
For Cable Modem Service
: When you perform the VPN firewall router setup steps be sure to
use the computer you first registered with your cable ISP.
•
For DSL Service
: You may need information such as the DSL login name/e-mail address and
password in order to complete the VPN firewall router setup.
Before proceeding with the VPN firewall router installation, familiarize yourself with the contents
of the
Resource CD (240-10207-01) for ProSafe VPN Firewall
, especially this manual and the
animated tutorials for configuring networking on PCs.
First, Connect the FVS114
1.
C
ONNECT
THE
CABLES
BETWEEN
THE
FVS114,
COMPUTER
,
AND
MODEM
a.
Turn off your computer.
b.
Turn off the cable or DSL broadband modem.

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top