1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. FSM7328S
    5. /
  5. 24
Page 116 / 400 Scroll up to view Page 111 - 115
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-48
Switching Commands
202-10088-01, March 2005
VLAN
This field indicates the VLAN associated with this Protocol Group.
Interface(s)
This field lists the slot/port
interface(s) that are associated with this Protocol
Group.
show storm-control
This command displays switch configuration information.
Format
show storm-control
Mode
Privileged EXEC
Broadcast Storm Recovery Mode
May be enabled or disabled. The factory default is
disabled.
802.3x Flow Control Mode
May be enabled or disabled. The factory default is disabled.
Virtual LAN (VLAN) Commands
vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-4094.
Format
vlan <
2-4094>
Mode
VLAN database
no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is
reserved for the default VLAN). VLAN range is 2-4094.
Format
no vlan <
2-4094>
Mode
VLAN database
Page 117 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-49
202-10088-01, March 2005
vlan acceptframe
This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged
frames or priority frames received on this interface are discarded. For Admit All mode, untagged
frames or priority frames received on this interface are accepted and assigned the value of the
interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Default
admit all
Format
vlan acceptframe
<vlanonly | all
>
Mode
Interface Config
no vlan acceptframe
This command sets the frame acceptance mode per interface to
Admit All
. For Admit All mode,
untagged frames or priority frames received on this interface are accepted and assigned the value
of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Format
vlan acceptframe
<vlanonly | all
>
Mode
Interface Config
vlan ingressfilter
This command enables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and
forwarded to ports that are members of that VLAN.
Default
disabled
Format
vlan ingressfilter
Mode
Interface Config
no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and
forwarded to ports that are members of that VLAN.
Format
no vlan ingressfilter
Mode
Interface Config
Page 118 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-50
Switching Commands
202-10088-01, March 2005
vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to
a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-4094.
Format
vlan makestatic <
2-4094>
Mode
VLAN database
vlan name
This command changes the name of a VLAN. The name is an
alphanumeric string of up to 32 characters, and the ID is a valid
VLAN identification number. ID range is 1-4094.
Default
The name for VLAN ID 1 is always Default. The name for other
VLANs is defaulted to a blank string.
Format
vlan name <
2-4094> <name>
Mode
VLAN database
no vlan name
This command sets the name of a VLAN to a blank string. The
VLAN ID is a valid VLAN identification number. ID range is 1-
4094.
Format
no vlan name <
2-4094>
Mode
VLAN database
vlan participation
This command configures the degree of participation for a specific interface in a VLAN. The ID is
a valid VLAN identification number, and the interface is a valid interface number
.
Format
vlan participation <
exclude | include | auto> <1-4094>
Mode
Interface Config
Participation options are:
include
The interface is always a member of this VLAN. This is equiva-
lent to registration fixed.
Page 119 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-51
202-10088-01, March 2005
exclude
The interface is never a member of this VLAN. This is equivalent
to registration forbidden.
auto
The interface is dynamically registered in this VLAN by GVRP.
The interface will not participate in this VLAN unless a join
request is received on this interface. This is equivalent to registra-
tion normal.
vlan participation all
This command configures the degree of participation for all interfaces in a VLAN. The ID is a
valid VLAN identification number
.
Format
vlan participation all <
exclude | include | auto> <1-
4094>
Mode
Global Config
Participation options are:
include
The interface is always a member of this VLAN. This is equiva-
lent to registration fixed.
exclude
The interface is never a member of this VLAN. This is equivalent
to registration forbidden.
auto
The interface is dynamically registered in this VLAN by GVRP.
The interface will not participate in this VLAN unless a join
request is received on this interface. This is equivalent to registra-
tion normal.
vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces. For VLAN Only mode, untagged
frames or priority frames received on this interface are discarded. For Admit All mode, untagged
frames or priority frames received on this interface are accepted and assigned the value of the
interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Default
admit all
Format
vlan port acceptframe all
<vlanonly | all
>
Mode
Global Config
Page 120 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-52
Switching Commands
202-10088-01, March 2005
no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to
Admit All
. For Admit All
mode, untagged frames or priority frames received on this interface are accepted and assigned the
value of the interface VLAN ID for this port. With either option, VLAN tagged frames are
forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format
no vlan port acceptframe all
Mode
Global Config
vlan port ingressfilter all
This command enables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Default
disabled
Format
vlan port ingressfilter all
Mode
Global Config
no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Format
no vlan port ingressfilter all
Mode
Global Config
vlan port pvid all
This command changes the VLAN ID for all interface.
Default
1
Format
vlan port pvid all <
1-4094>
Mode
Global Config
no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top