NETGEAR FSM7328S Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

NETGEAR

FSM7328S

Page 76 / 400 Scroll up to view Page 71 - 75

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

8-8

Switching Commands

202-10088-01, March 2005

CFI Discards

- The number of frames discarded that have CFI

bit set and the addresses in RIF are in non-canonical format.

Upstream Threshold

- The number of frames discarded due to

lack of cell descriptors available for that packet's priority level.

Packets Transmitted Octets

Total Bytes

- The total number of octets of data (including those

in bad packets) received on the network (excluding framing bits

but including FCS octets). This object can be used as a reasonable

estimate of ethernet utilization. If greater precision is desired, the

etherStatsPkts and etherStatsOctets objects should be sampled

before and after a common interval. -----

Packets Transmitted 64 Octets

- The total number of packets

(including bad packets) received that were 64 octets in length

(excluding framing bits but including FCS octets).

Packets Transmitted 65-127 Octets

- The total number of pack-

ets (including bad packets) received that were between 65 and

127 octets in length inclusive (excluding framing bits but includ-

ing FCS octets).

Packets Transmitted 128-255 Octets

- The total number of

packets (including bad packets) received that were between 128

and 255 octets in length inclusive (excluding framing bits but

including FCS octets).

Packets Transmitted 256-511 Octets

- The total number of

packets (including bad packets) received that were between 256

and 511 octets in length inclusive (excluding framing bits but

including FCS octets).

Packets Transmitted 512-1023 Octets

- The total number of

packets (including bad packets) received that were between 512

and 1023 octets in length inclusive (excluding framing bits but

including FCS octets).

Packets Transmitted 1024-1518 Octets

- The total number of

packets (including bad packets) received that were between 1024

and 1518 octets in length inclusive (excluding framing bits but

including FCS octets).

Packets Transmitted 1519-1522 Octets

- The total number of

packets (including bad packets) received that were between 1519

Page 77 / 400

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Switching Commands

8-9

202-10088-01, March 2005

and 1522 octets in length inclusive (excluding framing bits but

including FCS octets).

Max Info

- The maximum size of the Info (non-MAC) field that

this port will receive or transmit.

Packets Transmitted Successfully

Total

- The number of frames that have been transmitted by this

port to its segment.

Unicast Packets Transmitted

- The total number of packets that

higher-level protocols requested be transmitted to a subnetwork-

unicast address, including those that were discarded or not sent.

Multicast Packets Transmitted

- The total number of packets

that higher-level protocols requested be transmitted to a Multicast

address, including those that were discarded or not sent.

Broadcast Packets Transmitted

- The total number of packets

that higher-level protocols requested be transmitted to the Broad-

cast address, including those that were discarded or not sent.

Transmit Errors

Total Errors

- The sum of Single, Multiple, and Excessive Colli-

sions.

Tx FCS Errors

- The total number of packets transmitted that

had a length (excluding framing bits, but including FCS octets) of

between 64 and 1518 octets, inclusive, but had a bad Frame

Check Sequence (FCS) with an integral number of octets

Oversized

- The total number of frames that exceeded the max

permitted frame size. This counter has a max increment rate of

815 counts per sec. at 10 Mb/s.

Underrun Errors

- The total number of frames discarded

because the transmit FIFO buffer became empty during frame

transmission.

Transmit Discards

Total Discards

- The sum of single collision frames discarded,

multiple collision frames discarded, and excessive frames dis-

carded.

Single Collision Frames

- A count of the number of successfully

transmitted frames on a particular interface for which transmis-

sion is inhibited by exactly one collision.

Page 78 / 400

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

8-10

Switching Commands

202-10088-01, March 2005

Multiple Collision Frames

- A count of the number of success-

fully transmitted frames on a particular interface for which trans-

mission is inhibited by more than one collision.

Excessive Collisions

- A count of frames for which transmission

on a particular interface fails due to excessive collisions.

Port Membership

- The number of frames discarded on egress

for this port due to egress filtering being enabled.

VLAN Viable Discards

- The number of frames discarded on

this port when a lookup on a particular VLAN occurs while that

entry in the VLAN table is being modified, or if the VLAN has

not been configured.

Protocol Statistics

BPDU's received

- The count of BPDU's (Bridge Protocol Data

Units) received in the spanning tree layer.

BPDU's Transmitted

- The count of BPDU's (Bridge Protocol

Data Units) transmitted from the spanning tree layer.

802.3x Pause Frames Received

- A count of MAC Control

frames received on this interface with an opcode indicating the

PAUSE operation. This counter does not increment when the

interface is operating in half-duplex mode.

GVRP PDU's Received

- The count of GVRP PDU's received in

the GARP layer.

GVRP PDU's Transmitted

- The count of GVRP PDU's trans-

mitted from the GARP layer.

GVRP Failed Registrations

- The number of times attempted

GVRP registrations could not be completed.

GMRP PDU's received

- The count of GMRP PDU's received in

the GARP layer.

GMRP PDU's Transmitted

- The count of GMRP PDU's trans-

mitted from the GARP layer.

GMRP Failed Registrations

- The number of times attempted

GMRP registrations could not be completed.

STP BPDUs Transmitted

- Spanning Tree Protocol Bridge Pro-

tocol Data Units sent

STP BPDUs Received

- Spanning Tree Protocol Bridge Protocol

Data Units received

Page 79 / 400

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Switching Commands

8-11

202-10088-01, March 2005

RST BPDUs Transmitted

- Rapid Spanning Tree Protocol

Bridge Protocol Data Units sent

RSTP BPDUs Received

- Rapid Spanning Tree Protocol Bridge

Protocol Data Units received

MSTP BPDUs Transmitted

- Multiple Spanning Tree Protocol

Bridge Protocol Data Units sent

MSTP BPDUs Received

- Multiple Spanning Tree Protocol

Bridge Protocol Data Units received

Dot1x Statistics

EAPOL Frames Received

- The number of valid EAPOL

frames of any type that have been received by this authenticator.

EAPOL Frames Transmitted

- The number of EAPOL frames

of any type that have been transmitted by this authenticator.

Time Since Counters Last Cleared

The elapsed time, in days, hours, minutes, and sec-

onds since the statistics for this port were last cleared.

The display parameters, when the argument is ‘switchport, are as follows :

Octets Received

- The total number of octets of data received by

the processor (excluding framing bits but including FCS octets).

Total Packets Received Without Error

- The total number of

packets (including broadcast packets and multicast packets)

received by the processor.

Unicast Packets Received

- The number of subnetwork-unicast

packets delivered to a higher-layer protocol.

Multicast Packets Received

- The total number of packets

received that were directed to a multicast address. Note that this

number does not include packets directed to the broadcast

address.

Broadcast Packets Received

- The total number of packets

received that were directed to the broadcast address. Note that

this does not include multicast packets.

Receive Packets Discarded

- The number of inbound packets

which were chosen to be discarded even though no errors had

been detected to prevent their being deliverable to a higher-layer

protocol. A possible reason for discarding a packet could be to

free up buffer space.

Page 80 / 400

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

8-12

Switching Commands

202-10088-01, March 2005

Octets Transmitted

- The total number of octets transmitted out

of the interface, including framing characters.

Packets Transmitted without Errors

- The total number of

packets transmitted out of the interface.

Unicast Packets Transmitted

- The total number of packets that

higher-level protocols requested be transmitted to a subnetwork-

unicast address, including those that were discarded or not sent.

Multicast Packets Transmitted

- The total number of packets

that higher-level protocols requested be transmitted to a Multicast

address, including those that were discarded or not sent.

Broadcast Packets Transmitted

- The total number of packets

that higher-level protocols requested be transmitted to the Broad-

cast address, including those that were discarded or not sent.

Transmit Packets Discarded

- The number of outbound packets

which were chosen to be discarded even though no errors had

been detected to prevent their being deliverable to a higher-layer

protocol. A possible reason for discarding a packet could be to

free up buffer space.

Most Address Entries Ever Used

- The highest number of For-

warding Database Address Table entries that have been learned

by this switch since the most recent reboot.

Address Entries in Use

- The number of Learned and static

entries in the Forwarding Database Address Table for this switch.

Maximum VLAN Entries

- The maximum number of Virtual

LANs (VLANs) allowed on this switch.

Most VLAN Entries Ever Used

- The largest number of VLANs

that have been active on this switch since the last reboot.

Static VLAN Entries

- The number of presently active VLAN

entries on this switch that have been created statically.

Dynamic VLAN Entries

- The number of presently active

VLAN entries on this switch that have been created by GVRP

registration.

VLAN Deletes

- The number of VLANs on this switch that have

been created and then deleted since the last reboot.

Time Since Counters Last Cleared

The elapsed time, in days, hours, minutes, and sec-

onds, since the statistics for this switch were last cleared.

Rate

Popular NETGEAR Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share