User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Web-Based Management Interface
4-7
202-10088-01, March 2005
Secondary Menus
The Secondary Menus under the Main Menu contain a host of options that you can use to
configure your switch. The online help contains a detailed description of the features on each
screen. You can click the ‘help’ or the question mark at the top right of each screen to view the
help menu topics.
The Secondary Menus are detailed below, with cross-references to the sections in this manual that
contain the corresponding command descriptions.
Management
•
System — see
“System Information and Statistics Commands” on page 8-1
•
Utilities — see
“System Utility Commands” on page 8-59
•
Access — see the following sections:
•
“Administration Console Interface” on page 3-1
•
“System Management Commands” on page 8-15
•
Security — see
Chapter 9, “Security Commands
and
“User Account Commands” on
page 8-77
•
Port Access Control —
“Port Based Network Access Control (IEEE 802.1X)
Commands” on page 9-5
•
RADIUS — see
“Remote Authentication Dial In User Service (RADIUS)
Commands” on page 9-17
Switch
•
Port — see
“show port” on page 8-46
•
MAC Addresses — see
“System Information and Statistics Commands” on page 8-1
•
Spanning Tree — see
“Spanning Tree (STP) Commands” on page 8-118
•
Link Aggregation — see
“Link Aggregation (LAG)/Port-Channel (802.3AD) Commands”
on page 8-113
•
VLAN — see
“show vlan” on page 8-56
•
Mcast Fwding DB — see
“show forwardingdb agetime” on page 8-24
19216811.live