1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. FSM7328
    5. /
  5. 51
Page 251 / 400 Scroll up to view Page 246 - 250
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Routing Commands
10-19
202-10088-01, March 2005
Mode
Interface Config
no ip irdp address
This command configures the default address to be used to advertise the router for the interface.
Format
no ip irdp address
Mode
Interface Config
ip irdp holdtime
This command configures the value, in seconds, of the holdtime field of the router advertisement
sent from this interface. The range is the maxadvertinterval to 9000 seconds.
Default
3 * maxinterval
Format
ip irdp holdtime <maxadvertinterval-9000>
Mode
Interface Config
no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router
advertisement sent from this interface.
Format
no ip irdp holdtime
Mode
Interface Config
ip irdp maxadvertinterval
This command configures the maximum time, in seconds, allowed between sending router
advertisements from the interface. The range for maxadvertinterval is 4 to 1800 seconds.
Default
600
Format
ip irdp maxadvertinterval <
4-1800>
Mode
Interface Config
no ip irdp maxadvertinterval
This command configures the default maximum time, in seconds.
Format
no ip irdp maxadvertinterval
Mode
Interface Config
Page 252 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-20
Routing Commands
202-10088-01, March 2005
ip irdp minadvertinterval
This command configures the minimum time, in seconds, allowed between sending router
advertisements from the interface. The range for minadvertinterval is 3 to the value of
maxadvertinterval.
Default
0.75 *
maxadvertinterval
Format
ip irdp minadvertinterval <3-maxadvertinterval>
Mode
Interface Config
no ip irdp minadvertinterval
This command configures the default minimum time, in seconds.
Format
no ip irdp minadvertinterval
Mode
Interface Config
ip irdp preference
This command configures the preferability of the address as a default router address, relative to
other router addresses on the same subnet. The range is -2147483648 to -1 to 0 to 1 to
2147483647.
Default
0
Format
ip irdp preference <-2147483648-2147483647>
Mode
Interface Config
no ip irdp preference
This command configures the default preferability of the address as a default router address,
relative to other router addresses on the same subnet.
Format
no ip irdp preference
Mode
Interface Config
show ip irdp
This command displays the router discovery information for all interfaces, or a specified interface.
Format
show ip irdp {
<
slot/port
> | all}
Page 253 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Routing Commands
10-21
202-10088-01, March 2005
Mode
Privileged EXEC and User EXEC
Ad Mode
Displays the advertise mode which indicates whether router dis-
covery is enabled or disabled on this interface.
Max Int
Displays the maximum advertise interval which is the maximum
time allowed between sending router advertisements from the
interface in seconds.
Min Int
Displays the minimum advertise interval which is the minimum
time allowed between sending router advertisements from the
interface in seconds.
Adv Life
Displays advertise lifetime which is the value of the lifetime field
of the router advertisement sent from the interface in seconds.
Preferences
Displays the preference of the address as a default router address,
relative to other router addresses on the same subnet.
Virtual LAN Routing Commands
This chapter provides a detailed explanation of the Virtual LAN Routing commands. The
commands are divided by functionality into the following different groups:
•
Show commands are used to display switch settings, statistics and other information.
•
Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
•
Copy commands are used to transfer configuration and informational files to and from the
switch.
vlan routing
This command creates routing on a VLAN. The <vlanid> value has a range from 1 to 4094.
Format
vlan routing
<vlanid>
Mode
VLAN Database
no vlan routing
This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 4094.
Format
no vlan routing
<vlanid>
Page 254 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-22
Routing Commands
202-10088-01, March 2005
Mode
VLAN Database
show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled in the
system.
Format
show ip vlan
Mode
Privileged EXEC and User EXEC
MAC Address used by Routing VLANs
Is the MAC Address associated with the
internal bridge-router interface (IBRI). The same MAC Address is used by all VLAN routing
interfaces. It will be displayed above the per-VLAN information.
VLAN ID
Is the identifier of the VLAN.
Logical Interface
Indicates the logical slot/port associated with the VLAN routing
interface.
IP Address
Displays the IP Address associated with this VLAN.
Subnet Mask
Indicates the subnet mask that is associated with this VLAN.
Routing Information Protocol (RIP) Commands
This chapter provides a detailed explanation of the RIP commands. The commands are divided by
functionality into the following different groups:
•
Show commands are used to display switch settings, statistics and other information.
•
Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
•
Copy commands are used to transfer configuration and informational files to and from the
switch.
enable (RIP)
This command resets the default administrative mode of RIP in the router (active).
Default
enabled
Format
enable
Mode
Router RIP Config
Page 255 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Routing Commands
10-23
202-10088-01, March 2005
no enable (RIP)
This command sets the administrative mode of RIP in the router to inactive.
Format
no enable
Mode
Router RIP Config
ip rip
This command enables RIP on a router interface.
Default
disabled
Format
ip rip
Mode
Interface Config
no ip rip
This command disables RIP on a router interface.
Format
no ip rip
Mode
Interface Config
auto-summary
This command enables the RIP auto-summarization mode.
Default
enabled
Format
auto-summary
Mode
Router RIP Config
no auto-summary
This command disables the RIP auto-summarization mode.
Format
no auto-summary
Mode
Router RIP Config
default-information originate (RIP)
This command is used to control the advertisement of default routes.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top