Page 71 / 149
Scroll up to view Page 66 - 70
Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
Security
5-17
3.
Click Apply
Time Zone
The NETGEAR ProSafe Firewall uses the Network Time Protocol (NTP) to obtain the current
time and date from one of several Network Time Servers on the Internet. In order to localize the
time for your log entries, you must select your Time Zone from the list.
If your region uses Daylight Savings Time, you must manually check Adjust for Daylight Savings
Time at the beginning of the Daylight Savings Time, and uncheck it at the end. Enabling Daylight
Savings Time will cause one hour to be added to the standard time.
The firewall has a list of publicly available NTP servers. If you would prefer to use a particular
NTP server as the primary server, enter its IP address under Use this NTP Server.
Be sure to click Apply when you have finished configuring this menu.
Page 72 / 149
Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
5-18
Security
E-Mail
In order to receive logs and alerts by e-mail, you must provide your e-mail information in the
E-Mail subheading:
•
Turn e-mail notification on
Check this box if you wish to receive e-mail logs and alerts from the firewall.
•
Your outgoing mail server
Enter the name or IP address of your ISP’s outgoing (SMTP) mail server (such as
mail.myISP.com). You may be able to find this information in the configuration menu of your
e-mail program. If you leave this box blank, log and alert messages will not be sent via e-mail.
•
Send to this e-mail address
Enter the e-mail address to which logs and alerts are sent. This e-mail address will also be used
as the From address. If you leave this box blank, log and alert messages will not be sent via
e-mail.
You can specify that logs are immediately sent to the specified e-mail address when any of the
following events occur:
•
If a Denial of Service attack is detected
•
If a Port Scan is detected
•
If a user on your LAN attempts to access a website that you blocked using Keyword blocking.
Page 73 / 149
Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
Security
5-19
You can specify that logs are sent to you according to a schedule. Select whether you would like to
receive the logs Hourly, Daily, Weekly, or When Full. Depending on your selection, you may also
need to specify:
–
Day for sending log
Relevant when the log is sent weekly or daily.
–
Time for sending log
Relevant when the log is sent daily or weekly.
If the Weekly, Daily or Hourly option is selected and the log fills up before the specified
period, the log is automatically e-mailed to the specified e-mail address. After the log is sent,
the log is cleared from the firewall’s memory. If the firewall cannot e-mail the log file, the log
buffer may fill up. In this case, the firewall overwrites the log and discards its contents.
Be sure to click Apply when you have finished configuring this menu.
Page 74 / 149
Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
5-20
Security
Page 75 / 149
Wireless
6-1
Chapter 6
Wireless
This chapter describes how to configure the Wireless networking features of your FR114W
Wireless-Ready Firewall or FM114P Wireless Firewall with Print Server. This chapter does not
apply to the FR114P Firewall with Print Server.
The FR114W Wireless-Ready Firewall can be upgraded to wireless operation by purchasing and
installing a NETGEAR Model MA401 802.11b Wireless PC Card. For instructions on upgrading
the FR114W, refer to
“Installing a Wireless Card in the FR114W“ on page 2-6
.
Note:
If you are configuring the firewall from a wireless PC and you change the
firewall’s SSID, channel, or WEP settings, you will lose your wireless connection when
you click on Apply. You must then change the wireless settings of your PC to match the
firewall’s new settings.
19216811.live