1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. DGND3700
    5. /
  5. 26
Page 126 / 185 Scroll up to view Page 121 - 125
Advanced Settings
126
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
8.
If your Dynamic DNS provider allows the use of wildcards in resolving your URL, you can
select the
Use Wildcards
check box to activate this feature. For example, the wildcard
feature causes *.yourhost.dyndns.org to be aliased to the same IP address as
yourhost.dyndns.org.
9.
Click
Apply
to save your settings.
Note:
If your ISP assigns a private WAN IP address such as 192.168.x.x
or 10.x.x.x, the Dynamic DNS service will not work because private
addresses are not routed on the Internet.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as DHCP and Routing
Information Protocol (RIP). The wireless modem router is shipped preconfigured to use
private IP addresses on the LAN side and to act as a DHCP server. The wireless modem
router’s default LAN IP configuration is as follows:
•
LAN IP address
•
Subnet mask
. 255.255.255.0
These addresses are part of the private address range designated by the Internet
Engineering Task Force (IETF
) for use in private networks, and should be
suitable in most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN IP Setup screen.
Note:
If you change the LAN IP address of the wireless modem router
while connected through the browser, you are disconnected. To
reconnect, open a new connection to the new IP address and log in.
Downloaded from
www.Manualslib.com
manuals search engine
Page 127 / 185
Advanced Settings
127
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
To set up a LAN:
1.
Select
Advanced >
LAN Setup
.
Figure 50.
LAN Setup screen
2.
Enter the LAN Setup configuration and click
Apply
to save your changes.
Note:
The default DHCP and TCP/IP values work for most users.
•
Device Name
. This is an abbreviated name of the wireless modem router. You see
this name for the router in Network Explorer on Windows systems.
•
Use Auto IP
. Select this check box if you want the wireless modem router to set up
the
LAN IP
addresses automatically.
•
IP Address
. The LAN IP address of the wireless modem router.
•
IP Subnet Mask
. The LAN subnet mask of the wireless modem router. Combined
with the IP address, the IP subnet mask allows a device to know which other
addresses are local to it, and which have to be reached through a gateway or wireless
modem router.
•
Use Router as DHCP Server
. By default, the wireless modem router functions as a
Dynamic Host Configuration Protocol (DHCP) server, allowing it to assign IP, DNS
server, and default gateway addresses to all computers connected to the wireless
modem router’s LAN. The assigned default gateway address is the LAN address of
the router. IP addresses are assigned to the attached PCs from a pool of addresses
specified in this screen. Each pool address is tested before it is assigned to avoid
duplicate addresses on the LAN.
For most applications, the default DHCP and TCP/IP settings of the router are
satisfactory.
•
Reserved IP Addresses Setup
. When you specify a reserved IP address for a
computer on the LAN, that computer always receives the same IP address each time
it accesses the router’s DHCP server. Reserved IP addresses should be assigned to
servers that require permanent IP settings.
Downloaded from
www.Manualslib.com
manuals search engine
Page 128 / 185
Advanced Settings
128
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
To reserve an IP address:
1.
Select
Advanced > LAN Setup
and click the
Add
button.
2.
In the
IP Address
field, type the IP address to assign to the computer or server. Choose an
IP address from the router’s LAN subnet, such as 192.168.0.x.
3.
Type the MAC address of the computer or server.
Tip:
If the computer is already present on your network, copy its MAC
address from the Attached Devices screen and paste it here.
4.
Click
Apply
to enter the reserved address into the table.
Note:
The reserved address is not assigned until the next time the
computer contacts the router’s DHCP server. Reboot the computer
or access its IP configuration to force a DHCP release and renew.
To edit or delete a reserved address entry:
1.
Select the radio button next to the reserved address that you want to edit or delete.
2.
Click
Edit
or
Delete
.
Set Up Quality of Service (QoS)
Quality of Service (QoS) is an advanced feature that can be used to prioritize some types of
traffic ahead of others. The modem router can provide QoS prioritization over the wireless
link and on the Internet connection.
The modem router supports Wi-Fi Multimedia Quality of Service (WMM QoS) to prioritize
wireless voice and video traffic over the wireless link. WMM QoS provides prioritization of
wireless data packets from different applications based on four access categories: voice,
video, best effort, and background. For an application to receive the benefits of WMM QoS,
both it and the client running that application
has to
be WMM enabled. Legacy applications
that do not support WMM, and applications that do not require QoS, are assigned to the best
effort category, which receives a lower priority than voice and video.
Downloaded from
www.Manualslib.com
manuals search engine
Page 129 / 185
Advanced Settings
129
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Configure QoS for Internet Access
To specify prioritization of traffic, you have to add or create a policy for the type of traffic.
To configure QoS for Internet access:
1.
From the main menu, under Advanced, select
QoS Setup
.
2.
Click
Setup QoS rule
. The QoS Priority Rule list displays:
3.
To change a rule, select its radio button.
4.
Scroll down to the bottom of the screen:
Downloaded from
www.Manualslib.com
manuals search engine
Page 130 / 185
Advanced Settings
130
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
5.
To edit a rule, click
Edit
. To add a custom rule, click
Add Priority Rule
.
6.
Click
Apply
to save this rule to the QoS Policy list and return to the QoS Setup screen.
7.
In the QoS Setup screen, click
Apply
.
Advanced Wireless Settings
To configure the advanced wireless settings:
1.
Select
Advanced > Wireless Settings
to display the following screen:
Figure 51.
Advanced Wireless Settings screen
Note:
The WPS Settings section is not displayed if you selected WEP as
the security option.
2.
If you make changes, click
Apply
. Note that the WLAN settings come from the settings you
made in the
Wireless Settings Screen
on page 42.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top