1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. DGND3300v2
    5. /
  5. 2
Page 6 / 177 Scroll up to view Page 1 - 5
6
|
Contents
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Appendix B
Default Configuration and Technical Specifications
Restoring the Factory Configuration Settings. . . . . . . . . . . . . . . . . . . . . .147
Using the Restore Factory Settings Button . . . . . . . . . . . . . . . . . . . . .147
Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Appendix C
NETGEAR VPN Configuration
Configuration Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Step-by-Step Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
N300 Wireless Modem Router with FQDN to Gateway B . . . . . . . . . . . .153
Configuration Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
Step-by-Step Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Configuration Summary (Telecommuter Example) . . . . . . . . . . . . . . . . .157
Setting Up Client-to-Gateway VPN (Telecommuter Example). . . . . . . . .158
Step 1: Configure Gateway A (VPN Router at Main Office) . . . . . . . . .159
Step 2: Configure Gateway B (VPN Router at Regional Office). . . . . .160
Monitoring the VPN Tunnel (Telecommuter Example). . . . . . . . . . . . . . .166
Viewing the VPN Router’s VPN Status and Log Information . . . . . . . .167
Appendix D
Notification of Compliance
Appendix E
Related Documents
Index
Downloaded from
www.Manualslib.com
manuals search engine
Page 7 / 177
Chapter 1.
Router Internet Setup
|
7
1
1.
Router Internet Setup
Connecting to the network
This chapter describes how to configure your N300 Wireless Modem Router Internet
connection. When you install your N300 wireless modem router using the
Resource CD
as
described in the
N300 Wireless Dual Band ADSL2+ Modem Router Installation Guide,
these
settings are configured automatically for you. This chapter provides instructions on how to
log in to the N300 wireless modem router for further configuration.
Note:
NETGEAR recommends that Windows users use the Smart
Wizard™ on the
Resource CD
for initial configuration
.
Mac and
Linux OS users should access the
Setup Manual
on the
Resource
CD
.
This chapter includes the following sections:
•
Using the Setup Manual
on page
7
•
Logging In to Your N300 Wireless Modem Router
on page
8
•
Using the Setup Wizard
on page
9
•
Viewing or Manually Configuring Your ISP Settings
on page
10
•
Configuring ADSL Settings
on page
14
Using the Setup Manual
For first-time installation of your wireless N300 wireless modem router, refer to the
Setup
Manual
. The
Setup Manual
explains how to launch the NETGEAR Smart Wizard on the
Resource CD
to step you through the procedure to connect your N300 wireless modem
router and computers. The Smart Wizard will assist you in configuring your wireless settings
and enabling wireless security for your network. After initial configuration using the
Setup
Manual
, you can use the information in this
User Manual
to configure additional features of
your wireless N300 wireless modem router.
For installation instructions in a language other than English, see the language options on
the
Resource CD
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 8 / 177
8
|
Chapter 1.
Router Internet Setup
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Logging In to Your N300 Wireless Modem Router
You can log in to the N300 wireless modem router to view or change its settings. Links to the
Knowledge Base and documentation are also available on the N300 wireless modem router
main menu.
Note:
Your computer must be configured for DHCP. For help with
configuring DHCP, see the documentation that came with your
computer, or click the link to the online document
Preparing Your
Network
in Appendix
E.
When you have logged in, if you do not click
Logout
, the N300 wireless modem router waits
for 5 minutes after no activity before it automatically logs you out.
To log in to the N300 wireless modem router:
1.
modem router’s LAN IP address (the default is 192.168.0.1) in the address field of your
browser, and then press
Enter
. A login window displays:
Figure 1.
2.
Enter
admin
for the N300 wireless modem router user name and your password (or the
default,
password
).
For information about how to change the password, see
Changing the
Built-In Password
on page
35.
Note:
The N300 wireless modem router user name and password are not
the same as any other user name or password you might use to log
in to your Internet connection.
If the N300 wireless modem router has never been configured, the Smart Wizard screen
displays. After the N300 wireless modem router has been configured, the Firmware
Upgrade assistant will appear. See
Using the Setup Wizard
on page
9.
•
Checking for Firmware Updates screen
. After the initial configuration, the Firmware
Update screen displays unless you previously cleared the
Check for Updated Firmware
Upon Log-in
check box.
Downloaded from
www.Manualslib.com
manuals search engine
Page 9 / 177
Chapter 1.
Router Internet Setup
|
9
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Figure 2.
Note:
If the N300 wireless modem router is not configured (is in its factory
default state) when you log in, the Setup Wizard displays. See
Using
the Setup Wizard
on page
9.
If the N300 wireless modem router discovers a newer version of the firmware, you are
asked if you want to upgrade to the new firmware (see
Upgrading the Firmware
on
page
50 for details). If no new firmware is available, the following message displays.
Figure 3.
•
Router Status screen
. The Router Status screen displays if the N300 wireless modem
router has not been configured yet or has been reset to its factory default settings. See
Viewing N300 Wireless Modem Router Status Information
on page
52.
You can use the Setup Wizard to automatically detect your Internet connection as
described in
Using the Setup Wizard
on page
9, or you can bypass the Setup Wizard and
manually configure your Internet connection as described in
Viewing or Manually
Configuring Your ISP Settings
on page
10.
Using the Setup Wizard
You can manually configure your Internet connection using the Basic Settings screen, or you
can allow the Setup Wizard to detect your Internet connection. The Setup Wizard searches
your Internet connection for servers and protocols to determine your ISP configuration. This
feature is not the same as the Smart Wizard on the
Resource CD
that is used for installation.
To use the Setup Wizard:
1.
From the top of the main menu, select
Setup Wizard
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 10 / 177
10
|
Chapter 1.
Router Internet Setup
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Figure 4.
2.
Under Auto-Detect Connection Type, select
Yes
and then click
Next
to proceed.
3.
Enter your ISP settings, as needed.
4.
At the end of the Setup Wizard, click
Test
to verify your Internet connection. If you have
trouble connecting to the Internet, see
Troubleshooting
in Appendix
A.”
Viewing or Manually Configuring Your ISP Settings
To view or configure the basic settings:
1.
Log in to the N300 wireless modem router as described in
Logging In to Your N300
Wireless Modem Router
on page
8.
2.
From the N300 wireless modem router menu, select
Basic Settings
to display the Basic
Settings screen:
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top