1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. DGN2200v4
    5. /
  5. 20
Page 96 / 133 Scroll up to view Page 91 - 95
Advanced Settings
96
N300 Wireless ADSL2+ Modem Router DGN2200v4
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
6.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the modem router’s LAN interface.
If you do not specify an ID here, the modem router generates one automatically from its
MAC address.
7.
Click the
Apply
button.
IPv6 6to4 Tunnel
The remote relay router is the router to which your modem router creates the 6to4 tunnel.
Make sure that the IPv4 Internet connection is working before you apply the 6to4 tunnel
settings for the IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1.
Select
Advanced > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
6to4 Tunnel
.
The screen adjusts:
The modem router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the modem router’s WAN (or Internet) interface. The number after the slash (/) is
the length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the modem router’s LAN interface. The number after the slash (/) is the length of
the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
Page 97 / 133
Advanced Settings
97
N300 Wireless ADSL2+ Modem Router DGN2200v4
3.
Configure the remote 6to4 relay modem router settings by selecting one of the following
buttons:
•
Auto
. Your modem router uses any remote relay router that is available on the
Internet. This is the default setting.
•
Static IP Address
. Enter the static IPv4 address of the remote relay router. This
address is usually provided by your IPv6 ISP.
4.
Specify how the modem router assigns IPv6 addresses to the devices on your home
network (the LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
5.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the modem router’s LAN interface.
If you do not specify an ID here, the modem router generates one automatically from its
MAC address.
6.
Click the
Apply
button.
IPv6 Pass Through
In pass-through mode, the modem router works as a Layer 2 Ethernet switch with two ports
(LAN and WAN Ethernet ports) for IPv6 packets. The modem router does not process any
IPv6 header packets.
To set up a pass-through IPv6 Internet connection:
1.
Select
Advanced > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
Pass Through
.
The screen adjusts, but no additional fields display.
3.
Click the
Apply
button.
IPv6 Fixed
To set up a pass-through IPv6 Internet connection:
1.
Select
Advanced > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
Select
Fixed
from the menu.
Page 98 / 133
Advanced Settings
98
N300 Wireless ADSL2+ Modem Router DGN2200v4
The screen adjusts:
3.
Configure the fixed IPv6 addresses for the WAN connection.
The following fields are included in this screen:
•
IPv6 Address/Prefix Length
. The IPv6 address and prefix length of the modem
router WAN interface.
•
Default IPv6 Gateway
. The IPv6 address of the default IPv6 gateway, which is
supposed to be on the modem router’s WAN interface.
•
Primary DNS Server
. The primary DNS server that resolves IPv6 domain name
records for the modem router.
•
Secondary DNS Server
. The secondary DNS server that resolves IPv6 domain
name records for the modem router.
Note:
If you do not specify the DNS servers, the modem router uses the DNS
servers that are configured for the IPv4 Internet connection on the Internet
Setup screen. (See
Internet Setup
on page
23.)
4.
Specify how the modem router assigns IPv6 addresses to the devices on your home
network (the LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
5.
In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix length of
the modem router’s LAN interface.
If you do not specify an ID here, the modem router generates one automatically from its
MAC address.
6.
Click the
Apply
button.
Page 99 / 133
Advanced Settings
99
N300 Wireless ADSL2+ Modem Router DGN2200v4
IPv6 DHCP
To set up an IPv6 Internet connection with a DHCP server:
1.
Select
Advanced > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
DHCP
.
The screen adjusts:
The modem router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the modem router’s WAN (or Internet) interface. The number after the slash (/) is
the length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the modem router’s LAN interface. The number after the slash (/) is the length of
the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
3.
(Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people do not need to fill in this field, but if your ISP has given you a specific host
name, enter it here.
4.
(Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. (Do not enter the domain name for the
IPv4 ISP here.) For example, if your ISP’s mail server is mail.xxx.yyy.zzz, you would type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field.
(For example, Earthlink Cable might require a host name of home, and Comcast
sometimes supplies a domain name.)
5.
Specify how the modem router assigns IPv6 addresses to the devices on your home
network (the LAN) by selecting one of the following radio buttons:
Page 100 / 133
Advanced Settings
100
N300 Wireless ADSL2+ Modem Router DGN2200v4
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
6.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the modem router’s LAN interface.
If you do not specify an ID here, the modem router generates one automatically from its
MAC address.
7.
Click the
Apply
button.
IPv6 PPPoE
To set up a PPPoE IPv6 Internet connection:
1.
Select
Advanced > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
PPPoE
.
The screen adjusts:
The modem router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the modem router’s WAN (or Internet) interface. The number after the slash (/) is
the length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the modem router’s LAN interface. The number after the slash (/) is the length of
the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
3.
In the Login fields, enter the login information for the ISP connection.

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top