1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. D7800
    5. /
  5. 40
Page 196 / 299 Scroll up to view Page 191 - 195
4.
Select
Internet
.
5.
Configure a VLAN for the virtual Internet interface:
a.
Make sure that
Internet
is selected from the menu above the
Enable This Interface
check box and that
the
Enable This Interface
check box is selected for the virtual Internet interface (it is by default).
b.
Select the
Use VLANID
check box.
c.
Enter a VLAN ID that applies to the virtual Internet interface.
The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 10.
d.
To specify a priority for the VLAN, in the
Priority (0 ~ 7)
field, enter a value from 0 to 7.
e.
Click the
Apply
button.
Your settings are saved for the virtual Internet interface.
Manage the WAN and LAN Network Settings
196
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 197 / 299
6.
From the menu above the
Enable This Interface
check box, select
IPTV
.
The previous figure shows only the top of the Internet Setup page.
7.
Configure a VLAN for the virtual IPTV interface:
a.
Make sure that the
Enable This Interface
check box is selected for the virtual IPTV interface.
If you already enabled and configured the virtual IPTV interface, the check box is selected.
b.
Select the
Use VLANID
check box.
c.
Enter a VLAN ID that applies to the virtual IPTV interface.
The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 0.
d.
To specify a priority for the VLAN, in the
Priority (0 ~ 7)
field, enter a value from 0 to 7.
e.
Click the
Apply
button.
Your settings are saved for the virtual IPTV interface.
For information about enabling bridge mode for the IPTV virtual interface, see
Enable Bridge
Mode for IPTV Devices
on page 192.
Note
Set Up a Bridge for a Port Group or VLAN Tag Group
Some devices, such as an IPTV, cannot function behind the modem router’s network address translation (NAT)
service or firewall. Based on what your Internet service provider (ISP) requires, for the device to connect to the ISP’s
Manage the WAN and LAN Network Settings
197
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 198 / 299
network directly, you can enable the bridge between the device and the modem router’s Internet port or add new
VLAN tag groups to the bridge.
If your ISP provides directions on how to set up a bridge for IPTV and Internet service, follow
those directions.
Note
Set Up a Bridge for a Port Group
If the devices that are connected to the modem router’s Ethernet LAN port or WiFi network include an IPTV device,
your ISP might require you to set up a bridge for a port group for the modem router’s Internet interface.
A bridge with a port group prevents packets that are sent between the IPTV device and the modem router’s Internet
port from being processed through the modem router’s network address translation (NAT) service.
To configure a port group and enable the bridge:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter
.
A login window opens.
3.
Enter the modem router user name and password.
The user name is
admin
.The default password is
password
.The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > VLAN/Bridge Settings
.
The VLAN/Bridge Settings page displays.
5.
Select the
Enable VLAN/Bridge Group
check box.
The page expands.
Manage the WAN and LAN Network Settings
198
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 199 / 299
6.
Select the
By bridge group
radio button.
7.
Select a Wired Ports check box or a Wireless check box.
•
If your device is connected to an Ethernet port on the modem router, select the Wired Ports check box that
corresponds to the Ethernet port on the modem router to which the device is connected.
•
If your device is connected to your modem router’s WiFi network, select the Wireless check box that
corresponds to the modem router’s WiFi network to which the device is connected.
You must select at least one Wired Ports or Wireless check box.You can select more than
one check box.
Note
8.
Click the
Apply
button.
Your settings are saved.
Set Up a Bridge for a VLAN Tag Group
If the devices that are connected to the modem router’s Ethernet LAN ports or WiFi network include an IPTV device,
your ISP might require you to set up a bridge for a VLAN tag group for the modem router’s Internet interface.
If you are subscribed to IPTV service, the modem router might require VLAN tags to distinguish between the Internet
traffic and the IPTV traffic. A bridge with a VLAN tag group prevents packets that are sent between the IPTV device
and the modem router’s Internet port from being processed through the modem router’s network address translation
(NAT) service.
You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to each VLAN tag group.
To add a VLAN tag group and enable the bridge:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter
.
Manage the WAN and LAN Network Settings
199
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 200 / 299
A login window opens.
3.
Enter the modem router user name and password.
The user name is
admin
.The default password is
password
.The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > VLAN/Bridge Settings
.
The VLAN/Bridge Settings page displays.
5.
Select the
Enable VLAN/Bridge Group
check box.
6.
Select the
By VLAN tag group
radio button.
7.
Specify the settings as described in the following table.
Manage the WAN and LAN Network Settings
200
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top