1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. D7000
    5. /
  5. 16
Page 76 / 312 Scroll up to view Page 71 - 75
11.
Enter the cable or fiber settings as described in the following table.
Description
Field
These settings are not disabled but do not apply to a cable or
fiber connection.You can ignore these settings.
Transfer Mode
DSL Mode
Unless you changed the physical WAN interface settings so that
the
modem router
must use the Ethernet WAN interface (see
Multiplexing Method
VPI
Change the Physical WAN Connection Preference
on page 210),
Manage the Internet Settings Manually
76
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 77 / 312
Description
Field
these settings are not disabled. However, these settings do not
apply to a cable or fiber connection and you can ignore them.
VCI
Select the
Use VLANID
check box and enter the VLAN ID, as
indicated by your ISP.
Use VLANID
A VLAN ID might be required if you subscribe to both Internet
service and IPTV service. If your ISP did not provide you with a
VLAN ID, leave the
Use VLANID
check box cleared, which is the
default setting.
If your ISP provided you with a VLAN ID and a priority value,
enter the priority value, which is a number from 0 to 7.
Priority (0 ~ 7)
You can enter a priority value only in combination with a VLAN
ID. If your ISP did not provide you with a priority value, leave the
default setting (0).
This setting is an option that applies to the IPTV interface only.
Bridge Mode
For information about configuring bridge mode, see
Enable Bridge
Mode for IPTV Devices
on page 215.
Enter the account name, as indicated by your ISP. This name
might also be called the host name.
Account Name
If your ISP did not provide you with an account name or host
name, leave the default setting.
Enter the domain name, as indicated by your ISP.
Domain Name
If your ISP did not provide you with a domain name, leave this
field blank.
Internet IP Address
or
IPTV IP Address
(depending on your selection in Step 8)
Your ISP uses DHCP to assign your IP address.Your ISP
automatically assigns these addresses.
Get Dynamically from ISP
Enter the IP address, IP subnet mask, and gateway IP address
that your ISP assigned you for static IP address service. The
gateway is the ISP router to which your
modem router
connects.
Use Static IP Address
Manage the Internet Settings Manually
77
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 78 / 312
Description
Field
These settings are not disabled but do not apply to a cable or
fiber connection.You can ignore these settings.
Use IP over ATM (IPoA)
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Your ISP uses DHCP to assign your DNS servers.Your ISP
automatically assigns this address.
Get Automatically from ISP
If you know that your ISP does not automatically transmit DNS
addresses to the
modem router
during login, select this option
Use These DNS Servers
and enter the IP address of your ISP primary DNS server. If a
secondary DNS server address is available, enter it also.
NAT (Network Address Translation)
NAT allows computers on your home network to share the
modem router
Internet connection. NAT
is enabled by default because it is required in most situations. Select the NAT setting:
•
Enable
. NAT is enabled. This is the default setting. Leave this setting if no reason to disable NAT
exists.
•
Disable
. NAT is disabled.
Router MAC Address
The Ethernet MAC address that the
modem router
uses on the Internet port. Some ISPs register the
MAC address of the network interface card in your computer when your account is first opened.They
accept traffic only from the MAC address of that computer. This feature allows your
modem router
to use your computer’s MAC address (also called cloning).
Use the default MAC address.
Use Default Address
The
modem router
captures and uses the MAC address of the
computer that you are now using.You must use the one computer
that is registered by the ISP.
Use Computer MAC Address
Enter the MAC address that you want to use. By default, the field
displays the MAC address of the Internet port.
Use This MAC Address
DHCP Options
Manage the Internet Settings Manually
78
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 79 / 312
Description
Field
Enter the vendor class identifier (VCI) string, as indicated by your
ISP.
Vendor Class Identifier String
(option 60)
If your ISP did not provide you with a VCI string, leave this field
blank.
Enter the client identifier (client ID) string, as indicated by your
ISP.
Client Identifier String (option 61)
If your ISP did not provide you with a client ID string, leave this
field blank.
12.
Click the
Apply
button.
Your settings are saved.
13.
Click the
Test
button to test your Internet connection.
If the
NETGEAR
website does not display within one minute, see
Troubleshoot the Internet Connection
on page 299.
Specify a Cable or Fiber Connection with a Login
Requirement and PPPoE Service
If you want to manually configure the cable or fiber connection settings, use the information that your ISP
gave you to log in and connect to your Internet service. If you cannot find this information, contact your
ISP. Entering incorrect information might prevent the
modem router
from connecting to the Internet.
The
modem router
provides a virtual Internet interface and a virtual IPTV interface. In most situations,
you only need to configure the Internet interface. If you use one or more IPTV devices, you might also
need to configure the IPTV interface. Follow the directions that your ISP gave you.
If you must configure the IPTV interface, first use the following procedure to configure
the Internet interface. Then, repeat the procedure to configure the IPTV interface.
Note
To view or specify the settings for a cable or fiber Internet connection that requires a login and uses
a PPPoE service:
1.
Launch an Internet browser from a computer or WiFi device that is connected to the network.
2.
Type
.
A login window opens.
3.
Enter the
modem router
user name and password.
Manage the Internet Settings Manually
79
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 80 / 312
The user name is
admin
. The default password is
password
. The user name and password are
case-sensitive.
4.
Click the
OK
button.
The BASIC Home page displays.
5.
Select
Internet
.
The Internet Setup page displays.
6.
From the
Select Country
menu, select the country in which you use the
modem router
.
The
Select Country
menu is not available in all countries and might be masked out.
7.
From the
Select Internet Service Provider
menu, select the Internet service provider (ISP) that you
are using.
If your ISP is not in the menu, select
Other
.
8.
Select the virtual interface:
•
Internet interface
. From the menu above the
Enable This Interface
check box, leave the default
menu selection at
Internet
.
•
IPTV interface
. From the menu above the
Enable This Interface
check box, select
IPTV
.
9.
Specify that your ISP requires you to log in:
•
If you are configuring the Internet interface, scroll down to the Does your Internet connection require
a login? section and select the
Yes
radio button.
•
If you are configuring the IPTV interface, scroll down to the Does your IPTV connection require a
login? section and select the
Yes
radio button.
10.
Make sure that the
Enable This Interface
check box is selected.
As an example, the following figure shows the settings that display when you configure a cable or
fiber connection for the Internet interface.
Manage the Internet Settings Manually
80
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top