1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. CG4500BDv2
    5. /
  5. 4
Page 16 / 53 Scroll up to view Page 11 - 15
Wireless Configuration
16
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
If it works with WPS, it has a WPS utility and might also have a WPS button that you can
press.
2.
Log in to the gateway.
For more information, see
Log In to Your Gateway
on page
8.
3.
In the main menu, select
Add WPS Client
.
4.
Click
Next
.
The Add WPS Client screen displays:
5.
Either click the
WPS
button, or press the
button
on the front of the gateway.
•
The WPS LED on the front of the gateway begins to blink.
•
The gateway tries to communicate with the wireless computer or device for 2 minutes.
•
If the security option in the Wireless Settings screen was set to Disable, it is
automatically changed to WPA-PSK [TKIP] + WPA2-PSK [AES], including a random
wireless security password.
6.
Go to the wireless computer, and run its WPS configuration utility.
7.
To click the
WPS
button, follow the utility’s instructions.
When the computer connects to the wireless network, the gateway sends its SSID and
WPA-PSK or WPA2-PSK configuration to that computer.
8.
On the computer that just joined the wireless network, make sure you can connect to the
Internet.
Page 17 / 53
Wireless Configuration
17
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
You should see the gateway’s Internet LED blink, showing that the Internet connection is
in use.
Add a Client Using a PIN
Any computer or wireless device that connect wirelessly to the gateway is a client. After a
device is added as a client, it can automatically connect to the gateway.
To add a wireless device to your gateway using a PIN:
1.
Make sure that you know how WPS works on your computer or wireless device.
If it works with WPS, it has a WPS utility. To determine the PIN for your wireless computer
or device, use this utility.
2.
Log in to the gateway.
For more information, see
Log In to Your Gateway
on page
8.
3.
In the main menu, select
Add WPS Client
.
4.
Click
Next
.
The Add WPS Client screen displays:
5.
Select the
PIN
radio button.
6.
In the
Enter Client’s PIN
field, type the PIN that you located in Step 1.
7.
Click
Next
.
•
The WPS LED on the front of the gateway begins to blink.
•
The gateway tries to communicate with the wireless computer or device for 4 minutes.
•
If the security option in the Wireless Settings screen was set to Disable, it is
automatically changed to WPA-PSK (including a PSK security password).
When the computer connects to the wireless network, the gateway sends its SSID and
WPA-PSK or WPA2-PSK configuration to that computer.
Page 18 / 53
Wireless Configuration
18
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
8.
On the computer that just joined the wireless network, make sure you can connect to the
Internet.
You should see the gateway’s Internet LED blink, showing that the Internet connection is
in use.
Set Up W
i-Fi Multimedia
You can use the Wi-Fi Multimedia (WMM) screen to set up wireless multimedia Quality of
Service (QoS).
To set up Wi-Fi Multimedia:
1.
Log in to the gateway.
For more information, see
Log In to Your Gateway
on page
8.
2.
In the main menu, under Setup, select
Wi-Fi Multimedia
.
3.
Specify the Wi-Fi Multimedia settings for either the 2.4 GHz or 5 GHz network or both.
•
WMM Support
. Select
On
to enable WMM.
•
No-Acknowledgement
. Select
Off
if you want to use Acknowledgement (ACK)
messages. Select
On
if you do now want to use acknowledgement messages.
Usually,
Off is selected
which might improve the efficiency of packet transmission. If
wireless communication quality is poor at your location, select
On
so that you are
notified when a package is lost. High interference levels can cause poor
communication.
•
Power Save Support.
To conserve battery power in smaller devices that are
connected to the gateway, select
On
.
4.
Click
Apply
.
Page 19 / 53
19
3
3.
Managing
Y
our Network
This chapter describes how to perform network management tasks with your gateway. When
you log in to the gateway (see
Log In to Your Gateway
on page
8), these tasks are grouped
under Maintenance.
This chapter includes the following sections:
•
Change Your Password
•
View the Gateway Status
•
View the Connection Status
•
Back Up and Restore Your Settings
•
View the Event Log
•
Run the Diagnostic Utilities
•
Remove USB Devices
Page 20 / 53
Managing Your Network
20
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
Change
Y
our Password
For security reasons, the gateway has its own user name and password. NETGEAR
recommends that you change the default password to a more secure password. The ideal
password should contain no dictionary words from any language, and should be a mixture of
both uppercase and lowercase letters, numbers, and symbols. Passwords can contain up to
30 characters.
To change the password:
1.
In the main menu, under Maintenance, select
Set Password
.
2.
Enter the new password twice.
3.
Click
Apply
.
Note:
After changing the password, you will be required to log in again to
continue the configuration. If you have backed up the gateway
settings previously, you should do a new backup so that the saved
settings file includes the new password.

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top