Advanced Settings
53
N450 WiFi Cable Modem Router Model N450/CG3000Dv2
4.
Configure the settings described in the following table.
•
Fragmentation Threshold
•
CTS/RTS Threshold
•
Preamble Mode
5.
Click the
Apply
button.
Your changes are saved.
MAC Filtering
By default, the modem router allows any connected computer to access the Internet. The
MAC Filtering screen lets you block specific computers, based on their MAC addresses, from
access to the Internet on selected days and times.
To use MAC filtering to block Internet access for a specific computer:
1.
Type
in the address field of your web browser.
Advanced Wireless Settings
Description
Wireless Access
Point
Enable
By default this check box is selected so that the
modem router works as a wireless access point. You
can turn off the wireless radio to disable access
through this device, which can be helpful for
configuration, network tuning, or troubleshooting
activities.
Advanced
Configuration
The default settings for these fields usually work fine.
Change them only if you have a specific reason for
doing so.
WPS Settings
Disable router’s PIN
Selecting this check box disables the PIN that WPS
clients use to connect to the modem router with the
PIN method. Normally this check box is cleared,
which is the default setting.
Keep Existing Settings
If a WPS client is added, the modem router
automatically selects this check box. When the
Keep
Existing Settings
check box is selected, the SSID
and wireless security settings remain the same when
more WPS clients are added.
Wireless Access List
Set up Access List
Access control is disabled by default so that any
computer that is configured with the correct SSID
can connect.
19216811.live