Administration
92
CENTRIA WNDR4700/WNDR4720
Internet Port (WAN) Setup
MAC Address
. The Media Access Control address, which is the unique physical address
that the Internet (WAN) port of the router uses.
IP Address
. The IP address that the Internet (WAN) port of the router uses. If no address is
shown or the address is 0.0.0, the router cannot connect to the Internet.
Connection
. This shows if the router is using a fixed IP address on the WAN. If the value is
DHCP Client, the router obtains an IP address dynamically from the ISP.
IP Subnet Mask
. The IP subnet mask that the Internet (WAN) port of the router uses.
Domain Name Server
. The Domain Name Server addresses that the router uses. A Domain
Name Server translates human-language URLs such as www.netgear.com into IP
addresses.
Statistics Button
On the Router Status screen, in the Internet Port pane, click the
Show Statistics
button to
display the following screen:
Figure 7. System up time and poll interval statistics
System Up Time
. The time elapsed since the router was last restarted.
Port
. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the
screen displays:
•
Status
. The link status of the port.
•
TxPkts
. The number of packets transmitted on this port since reset or manual clear.
•
RxPkts
. The number of packets received on this port since reset or manual clear.
•
Collisions
. The number of collisions on this port since reset or manual clear.
•
Tx B/s
. The current transmission (outbound) bandwidth used on the WAN and LAN ports.
•
Rx B/s
. The current reception (inbound) bandwidth used on the WAN and LAN ports.
•
Up Time
. The time elapsed since this port acquired the link.
•
Poll Interval
. The interval at which the statistics are updated in this screen.
To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
Set Interval
.