Page 16 / 50
Scroll up to view Page 11 - 15
Advanced Features (AP/Router Mode)
High Level Configuration Options
Page 17 / 50
YML803X
Velocity User Guide
803X
Velocity User Guide
X
Velocity User Guide
Velocity User Guide
www.netcomm.com.au
17
NetComm Velocity
TM
Series - Wireless N150/N300 Router
AP Router Mode –
Advanced Features
Velocity Series uses web-interface for configuration to be accessed through your web browser, such as Internet Explorer or Netscape
Communicator.
Login Procedure
1.
Openyour browser (e.g. Internet Explorer).
±.
Type http://19±.168.±0.1 in address bar and hit [Enter] button on your keyboard.
3.
Type “admin” as both the username and password and Click <OK> to navigate into Velocity Series configuration home page.
4.
You will see the home page of Velocity Series as follows.
Page 18 / 50
Velocity Series User Guide
YML803X
18
www.netcomm.com.au
System
Status
This page allows you to monitor the current status of your router.
System
You can see the UP time, hardware information, serial number as well as firmware version information.
WAN Settings
This section displays whether the WAN port is connected to a Cable/DSL connection. It also displays the router’s WAN IP address, Subnet
Mask, and ISP Gateway as well as MAC address, the Primary DNS.
LAN Settings
This section displays the Broadband router LAN port’s current information. It also shows whether the DHCP Server function is enabled /
disabled.
WLAN Settings
This section displays the current WLAN configuration settings you’ve configured in the Wizard / Basic Settings / Wireless Settings section.
Wireless configuration details such as SSID, Security settings, BSSID, Channel number, mode of operation are briefly shown.
LAN
The LAN Tab reveals LAN settings which can be altered. If you are an entry level user, try accessing a website from your browser. If you can
access a website without a glitch, just do not change any of these settings.
Click <Apply> at the bottom of this screen to save the changed configurations.
Page 19 / 50
YML803X
Velocity User Guide
803X
Velocity User Guide
X
Velocity User Guide
Velocity User Guide
www.netcomm.com.au
19
NetComm Velocity
TM
Series - Wireless N150/N300 Router
LAN IP
IP address
:
192.168.20.1. It is the router’s LAN IP address (Your LAN clients default gateway IP address). It can be changed based on
your own choice.
IP Subnet Mask
: ±55.±55.±55.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree
: This is disabled by default. If 802.1d Spanning Tree function is enabled, this router will use the spanning tree
protocol to prevent network loops.
DHCP Server
DHCP Server
: This will enable or disable the Dynamic Pool setting..
Lease time
: This is the lease time of each assigned IP address.
Start IP
: This will be the beginning of the pool of IP addresses available for client devices.
End IP
: This will be the end of the pool of IP addresses available for client devices.
Domain name
: The Domain Name for the existing or customized network.
Page 20 / 50
Velocity Series User Guide
YML803X
±0
www.netcomm.com.au
DHCP
View the current LAN clients which are assigned with an IP Address by the DHCP-server. This page shows all DHCP clients (LAN PCs) currently
connected to your network. The table shows the assigned IP address, MAC address and expiration time for each DHCP leased client. Use the
<Refresh> button to update the available information.
You can check “Enable Static DHCP IP“. It is possible to add more static DHCP IPs. They are listed in the table “Current Static DHCP
Table“. IP address can be deleted at will from the table.
Click <Apply> button to save the changed configuration.
Schedule
This page allows user to set up schedule function for Firewall and Power Saving.
Add schedule, edit schedule options to allow configuration of firewall and power savings services. Fill in the schedule and select type of
service. Click <Apply> to implement those settings.
The schedule table lists the pre-schedule service-runs. You can select any of them using the check box.
19216811.live