Saving power in WLAN mode can be enabled / disabled in this page.
Diagnosis
This page could let you diagnosis your current network status.
Firmware
This page allows you to upgrade the router’s firmware. To upgrade the firmware of your Broadband router, you need to download the
firmware file to your local hard disk, and enter that file name and path in the appropriate field on this page. You can also use the Browse
button to find the firmware file on your PC.
Once you’ve selected the new firmware file, click <Apply> at the bottom of the screen to start the upgrade process
Page 47 / 50
YML803X
Velocity User Guide
803X
Velocity User Guide
X
Velocity User Guide
Velocity User Guide
www.netcomm.com.au
47
NetComm Velocity
TM
Series - Wireless N150/N300 Router
Back-up
The page allows you to save (Backup) the router’s current configuration settings. When you save the configuration setting (Backup) you can
re-load the saved configuration into the router through the Restore selection. If extreme problems occur you can use the Restore to Factory
Defaults selection, this will set all configurations to its original default settings (e.g. when you first purchased the router).
Restore Settings: This can save the Broadband router current configuration to a file named “config.bin” on your PC. You can also use the
<Upload> button to restore the saved configuration to the Broadband router. Alternatively, you can use the “Restore to Factory Defaults” to
force the Broadband router to perform a power reset and restore the original factory settings.
Reset
You can reset the broadband router when system stops responding correctly or stop functions.
Page 48 / 50
Appendix
Important Additional Information
Page 49 / 50
YML803X
Velocity User Guide
803X
Velocity User Guide
X
Velocity User Guide
Velocity User Guide
www.netcomm.com.au
49
NetComm Velocity
TM
Series - Wireless N150/N300 Router
Legal & Regulatory Information
This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted under the Copyright Act, no part may be
reproduced, stored in a retrieval system or transmitted in any form, by any means, be it electronic, mechanical, recording or otherwise, without the prior written permission of
NetComm Limited. NetComm Limited accepts no liability or responsibility, for consequences arising from the use of this product.
NetComm Limited reserves the right to change the specifications and operating details of this product without notice.
NetComm is a registered trademark of NetComm Limited.
All other trademarks are acknowledged the property of their respective owners.
Product Warranty
The warranty is granted on the following conditions:
1.
This warranty extends to the original purchaser (you) and is not transferable;
2.
This warranty shall not apply to software programs, batteries, power supplies, cables or other accessories supplied in or with the product;
3.
The customer complies with all of the terms of any relevant agreement with NetComm and any other reasonable requirements of NetComm including producing such evidence
of purchase as NetComm may require;
4.
The cost of transporting product to and from NetComm’s nominated premises is your responsibility; and,
5.
NetComm does not have any liability or responsibility under this warranty where any cost, loss, injury or damage of any kind, whether direct, indirect, consequential, incidental
or otherwise arises out of events beyond NetComm’s reasonable control. This includes but is not limited to: acts of God, war, riot, embargoes, acts of civil or military
authorities, fire, floods, electricity outages, lightning, power surges, or shortages of materials or labour.
6.
The customer is responsible for the security of their computer and network at all times. Security features may be disabled within the factory default settings. NetComm
recommends that you enable these features to enhance your security.
The warranty is automatically voided if:
1.
You, or someone else, use the product, or attempts to use it, other than as specified by NetComm;
2.
The fault or defect in your product is the result of a voltage surge subjected to the product either by the way of power supply or communication line, whether caused by
thunderstorm activity or any other cause(s);
3.
The fault is the result of accidental damage or damage in transit, including but not limited to liquid spillage;
4.
Your product has been used for any purposes other than that for which it is sold, or in any way other than in strict accordance with the user manual supplied;
5.
Your product has been repaired or modified or attempted to be repaired or modified, other than by a qualified person at a service centre authorised by NetComm; and,
6.
The serial number has been defaced or altered in any way or if the serial number plate has been removed.
Limitations of Warranty
The Trade Practices Act 1974 and corresponding State and Territory Fair Trading Acts or legalisation of another Government (“the relevant acts”) in certain circumstances imply
mandatory conditions and warranties which cannot be excluded. This warranty is in addition to and not in replacement for such conditions and warranties.
To the extent permitted by the Relevant Acts, in relation to your product and any other materials provided with the product (“the Goods”) the liability of NetComm under the
Relevant Acts is limited at the option of NetComm to:
•
Replacement of the Goods; or
•
Repair of the Goods; or
•
Payment of the cost of replacing the Goods; or
•
Payment of the cost of having the Goods repaired.
All NetComm ACN 002 490 486 products have a standard 12 months warranty from date of purchase. However some products have an extended warranty option (refer to
packaging). To be eligible for the extended warranty you must supply the requested warranty information to NetComm within 30 days of the original purchase by registering on-line
via the NetComm web site at
www.netcomm.com.au
Page 50 / 50
Product Warranty
NetComm products have a standard 12 months warranty from date of purchase. However some products have an extended
warranty option, via
registering your product online at the NetComm website
www.netcommlimited.com
.
Technical Support
If you have any technical difficulties with your product, please refer to the support section of our website.
www.netcomm.com.au/support
Note:NetComm Technical Support for this product only covers the basic installation and features outlined in the Quick Start Guide. For further information regarding the advanced features of this product, please
refer to the configuring sections in the User Guide or contact a Network Specialist.
19216811.live