19216811.liveNF3ADV User Guide
11
Hardware installation
1.
Insert an Ethernet LAN cable from the
2.
For VoIP functionality, connect a stand
3.
For PSTN pass-through connect an R
4.
Connect the power adapter to the Po
5.
Plug the power adapter into the wall s
6.
Wait approximately 60 seconds for th
Connecting via an Ethe
1.
Connect the Ethernet cable provided
2.
Connect the other end of the yellow E
3.
Wait approximately 30 seconds for th
4.
Open your Web browser and type http
5.
Enter “admin” (without quotations) for
6.
Follow the steps of the start-up wizard
7.
After the setup process is completed,
Connecting wirelessly
1.
Ensure WiFi is enabled on your device
2.
Scan for wireless networks in your are
on the Wireless Security Card (include
Please note: For security purposes,
Security Key. The included Wireless
above.
3.
When prompted for your wireless sec
4.
Wait approximately 30 seconds for th
5.
Open your Web browser and type http
6.
Enter “admin” (without quotations) as
7.
Follow the steps to set up your NF3AD
8.
After the setup process is completed,
9.
To connect additional devices via WiF
e WAN port of the NF3ADV to a LAN port on your modem
dard analogue telephone to the FXS port using the RJ-1
RJ-11 cable from any wall jack to the FXO Line port of th
ower socket on the back of the NF3ADV.
socket and switch on the power.
he NF3ADV to power up.
ernet cable
to the port marked LAN at the back of the NF3ADV.
Ethernet cable to your computer.
he connection to establish.
tp://192.168.1.1 into the address bar and press enter.
r both the Username and Password and click on the Log
d to set up your NF3ADV.
, you will be connected to the Internet.
e (computer/laptop/Smartphone).
ea and connect to the network name that matches the W
ed in the box).
Figure 3 - Included Security Card
, each NF3ADV has a unique SSID (such as NetComm W
s Security Card lists these fields instead of the xxxxx’s as
curity settings, enter the wireless security key listed on yo
he connection to be established.
tp://192.168.1.1 into the address bar and press enter.
both the Username and Password and press the Login
DV.
, you will be connected to the Internet.
Fi, repeat steps 1 through 4.
www.netcommwireless.com
m/switch/hub.
11 Cable provided.
he NF3ADV.
gin button.
Wireless network name found
Wireless XXXX) and Wireless
s shown in the screenshot
our Wireless Security Card.
button.