6

NetComm NF2 User Guide

www.netcommlimited.com

YML27

Product Introduction

Product Overview



Wireless WAN (where network is available) - GPRS/EDGE/WCDMA/HSDPA/HSUPA/CDMA2000/EVDO/LTE.



Ethernet WAN

–

PPPoE, DHCP client, Static IP, PPTP, L2TP



2 x USB 2.0 ports

–

for 3G/4G, USB storage.



2 x 3 internal WiFi antenna



1 x external WiFi antenna



IPv6 Support

–

Dual Stack IPv6, Static IPv6, DHCPv6, PPPOE, 6 to 4, IPv6 to IPv4 tunnel



3 x 10/100/1000Mbps LAN Ethernet ports.



1 x 10/100/1000Mbps WAN Ethernet port for optional alternate Internet connectivity (ADSL/Cable/Satellite).



802.11n up to 900Mbps Wireless

1

(Backward compatible with 802.11b/g/a).



2.4GHz and 5.0GHz Concurrent WiFi.



Supports auto Internet fallback from 3G to a fixed line WAN connection (ADSL/Cable/Satellite).



WiFi Protected Setup (WPS) for wireless connectivity.



Browser based interface for configuration and management.



Wireless security options- WEP/WPA/WPA-PSK/WPA2/WPA2-PSK.



VPN IPsec, VPN L2TPClient/Server, VPN PPTP Client/Server.

1.

Speeds are dependent on network coverage. See your MBB provider coverage maps for more details. The total number of WiFi users can also affect data speeds.

The maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g and 802.11n specifications. The actual wireless speed and

coverage are dependent on network and environmental conditions including but not limited to the volume of network traffic, building materials and

construction/layout.

Package Contents

The NF2 Hub package consists of:



1 x NF2 WiFi Router.



1 x 12VDC~1.5A Power Adapter.



1 x External Antenna.



1 x RJ-45 LAN Cable.



Quick Setup Guide.



Wireless Security Card.



Warranty Card.

If any of these items are missing or damaged, please contact your dealer immediately.

Product Features

The NetComm NF2 creates a secure WiFi network, providing Internet access for up to 15 users. Simply plug the NF2 into a power

outlet then insert a Mobile Broadband (MBB) dongle into the USB port on the side panel to access a high speed Internet connection

within minutes.

The NetComm NF2 incorporates a WLAN 802.11b/g/n access point, three 10/100/1000Mbps Gigabit Ethernet ports and one

10/100Mbps Ethernet WAN port. It features the latest security options such as WPA and WPA2 data encryption, SPI (Stateful

Packet Inspection) Firewall and VPN pass through.

www.netcommlimited.com

NF2

–

Dual Band Wi-Fi Gigabit Hub User Guide

7

YML38

Physical Dimensions and

Indicators

LED Indicators

The NetComm NF2 has been designed to be placed on a desktop. All of the cables exit from the rear for better organization. The

display is visible on the front of the NF2 to provide you with information about network activity and the device status. See below for

an explanation of each of the indicator lights.

Table 2 - LED Indicators

LED

INDICATOR

ICON

DEFINITION

3G

A solid blue light indicates the NF2 is connected via 4G. The 4G LED

will flash on data traffic throughput.

WWW

A solid blue light will appear when the WWW connection is established.

WDS

When the NF2 is connected via wireless to another access point this

LED will be lit up.

LAN

The LAN LEDs will be a solid blue light when a specific LAN connection

is established. The LED flashes on LAN port traffic throughput.

WAN

WAN mode: The WAN LED lights up when the router is connected to

the internet via a fixed line WAN connection.

WWW

A solid blue light appears when the WWW connection is established.

WiFi

The LED will show a solid blue light when WLAN is enabled. The LED

flashes on traffic throughput (data transfer).

Power

The power LED will be a solid blue light when the device is powered

on. The power LED will flash during the device start up process.

8

NetComm NF2 User Guide

www.netcommlimited.com

YML27

Integrated Interfaces

The following integrated interfaces are available on the rear of the NetComm NF2:

Table 3

–

Integrated Interface

INTERFACE

FUNCTION

WiFi Antenna

Attach the wireless antenna turning it in a clockwise direction.

WAN

The WAN Ethernet port for a Fixed Line (ADSL/Cable/Satellite) connection

to the internet.

On/Off

The power button for the NF2. Press once to switch the unit on or off.

LAN 1

The LAN 1 Port for wired Ethernet clients (Computers, Laptops, etc).

LAN 2

The LAN 2 Port for wired Ethernet clients (Computers, Laptops, etc).

LAN 3

The LAN 3 Port for wired Ethernet clients (Computers, Laptops, etc).

Power

The power connector designed for use with a DC 12V 1.5A Power

Adapter.

Reset

Hold this button down for over 10 seconds to reset the router to factory

default settings.

3G

Connect a 3G/4G USB modem here

USB Storage

Connect a USB based storage device here

www.netcommlimited.com

NF2

–

Dual Band Wi-Fi Gigabit Hub User Guide

9

YML38

NF2 Default Settings

The following tables list the default settings for the NF2 Hub.

LAN (MANAGEMENT)

Static IP Address:

192.168.20.1

Subnet Mask:

255.255.255.0

Default Gateway:

192.168.20.1

Table 3: LAN Management Default Settings

WAN (INTERNET)

WAN mode:

Dynamic IP

Table 4: WAN Port Default Settings

WIRELESS (WIFI)

SSID:

(Refer to the included wireless security card)

Security:

WPA-PSK/WPA2-PSK

Security Key:

(Refer to the included wireless security card)

Table 5: WiFi Default Settings

For security purposes, each NF2 comes with a unique SSID that varies by a 4 digit number at the end.

e.g. SSID: “

NetComm Wireless XXXX

”

NF2

™ HUB

WEB INTERFACE ACCESS

Username:

admin

Password:

admin

Table 6: Web Interface Default Settings

10

NetComm NF2 User Guide

www.netcommlimited.com

YML27

Safety and Product Care

With reference to unpacking, installation, use and maintenance of your electronic device, the following basic guidelines are

recommended:



To avoid fire or shock hazard do not use or install this product near water. For example, near a bathtub, kitchen sink,

laundry tub, or near a swimming pool. Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).



Do not connect the power supply cord on elevated surfaces. Allow it to lie freely. There should be no obstructions in its

path and no heavy items should be placed on the cord. In addition, do not walk on, step on or mistreat the cord.



To safeguard the equipment against overheating, make sure that all openings in the unit that offer exposure to air are

unobstructed.

WARNING

Disconnect the power line from the device before servicing.

Transport and Handling

When transporting the NetComm NF2, it is recommended to return the product in the original packaging. This ensures the product

will not be damaged.

In the event the product needs to be returned, ensure it is securely packaged with appropriate padding to prevent

damage during courier transport.