Page 61 / 112 Scroll up to view Page 56 - 60
YML754 Rev1
NB5Plus4/W User Guide
www.netcomm.com.au
³1
Select ‘I°’:
The NB5Plus4/W will only incorporate
received RIP information.
Select ‘Out’:
The NB5Plus4/W will only send out RIP
information.
Select ‘Both’:
The NB5Plus4/W will both incorporate
received RIP information and send out
updated RIP information.
Advanced>Port Forwarding
Port Forwarding is necessary because NAT [=Network Address Translation] only
forwards traffic from the Internet to the LAN if a specific port mapping exists in the
NAT translation table. Because of this, the NAT provides a level of protection for
computers that are connected to your LAN. However, this also creates a connectivity
problem when you want to make LAN resources available to Internet clients, which
you may want to do to play network games or host network applications.
Page 62 / 112
NB5Plus4/W User Guide
YML754Rev1
³±
www.netcomm.com.au
Thus Port Forwarding is necessary to run certain games, chat clients, video-confer-
encing and other kinds of applications.
You might also need to configure port-for
-
warding if you intend to host a web server or mail server that is to be visible outside
your LAN.
TIP:
In situations where you are hosting a Web Site or, for example, setting up
a regular NetMeeting link, it is advisable to consider implementing a Fixed
IP address, otherwise the dynamic IP address allocated by DHCP will need
to be communicated prior to every user session.
More about Port Forwarding
In TCP/IP and UDP networks a port is a 16-bit number used to identify which ap-
plication program (usually a server) incoming connections should be delivered to.
Some ports have numbers that are pre-assigned to them by the IANA (the Inter-
net Assigned Numbers Authority), and these are referred to as “well-known ports”.
Servers follow the well-known port assignments so clients can locate them.
If you wish to run a server on your network that can be accessed from the WAN
(i.e. from other machines on the Internet that are outside your local network), or
any application that can accept incoming connections (e.g. Peer-to-peer/P2P soft-
ware such as instant messaging applications and P2P file-sharing applications) and
are using NAT (Network Address Translation), then you will usually need to config
-
ure your router to forward these incoming connection attempts using specific ports
to the PC on your network running the application. You will also need to use port
forwarding if you want to host an online game server.
The reason for this is that when using NAT, your publicly accessible IP address will
be used by and point to your router, which then needs to deliver all traffic to the
private IP addresses used by your PCs.
The Internet Assigned Numbers Authority (IANA) is the central coordinator for the
assignment of unique parameter values for Internet protocols. Port numbers range
Page 63 / 112
YML754 Rev1
NB5Plus4/W User Guide
www.netcomm.com.au
³²
from 0 to 65535, but only ports numbers 0 to 1023 are reserved for privileged serv-
ices and are designated as “well-known ports”. The registered ports are numbered
from 1024 through 49151. The remaining ports, referred to as dynamic ports or
private ports, are numbered from 49152 through 65535.
Examples of well-known and registered port numbers are shown in Table 4, for fur-
ther information, please see IANA’s website at: http://www.iana.org/assignments/
port-numbers
Well-know and registered Ports
Port Number
Protocol
Description
20
TCP
FTP Data
21
TCP
FTP Control
22
TCP & UDP
SSH Remote Login Protocol
23
TCP
Telnet
25
TCP
SMTP (Simple Mail Transfer Protocol)
53
TCP & UDP
DNS (Domain Name Server)
69
UDP
TFTP (Trivial File Transfer Protocol)
80
TCP
World Wide Web HTTP
110
TCP
POP3 (Post Office Protocol Version 3)
119
TCP
NEWS (Network News Transfer Protocol)
123
UDP
NTP (Network Time Protocol)
443
TCP & UDP
HTTPS
1503
TCP
T.120
1720
TCP
H.323
4000
TCP
ICQ
7070
UDP
RealAudio
Easy Port Forwarding: Applying Pre-Defined Rules
Available pre-defined rules are categorised according to the application type.
Click
the Radio Button adjacent to the appropriate Category, and then select the required
application name. Click on the Add button to move the application into the Applied
Rules box. In the example shown on the previous page, ‘Delta Force’ has been se-
lected from the list of Available Rules and is about to be copied to Applied Rules.
In
the example, this will configure your Modem ports to use with ‘Delta Force’ .
Page 64 / 112
NB5Plus4/W User Guide
YML754Rev1
³4
www.netcomm.com.au
tivity directly from the NB5Plus4/W to the Internet or to a computer on your Net-
work. You must make certain that the IP address that you ping will actually respond
to a ping before interpreting the results of the ping.
Note:
Computers and Network devices can be configured to communicate even
though they do not respond to a ping, this can sometimes be done for
security.
Tools>Modem Test
This test can be used to check whether your Modem is properly connected to the
Network. This test may take a few seconds to complete. To perform the test, select
your connection from the list and press the Test button.
Note:
Errors or failures on this test do not specifically mean your connection is
faulty, only your ISP can tell you if these tests should pass or fail.
Status
The Status section allows you to view the Status/Statistics of different connections
and interfaces.
Status>Network Statistics
You can view data statistics for your Ethernet ports combined or for your ADSL port
in these pages.
Note:
The statistics will be reset on loss of power or Reboot/Reset.
Page 65 / 112
YML754 Rev1
NB5Plus4/W User Guide
www.netcomm.com.au
³5
Status > Connection Status
Here you can view the connection status of your Internet connection (usually ‘PP-
PoE’). You can also see the Public IP address that has been assigned to your modem

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top