This section allows you to set up System Monitoring on your MyZone. To configure System Monitoring follow these steps –
1.
Destination Address: Enter the destination address you would like to test.
2.
Second Address: Enter a secondary destination address you would like to test.
3.
Periodic PING Timer: Enter a value for the PING timer in seconds.
4.
Periodic PING Accelerated Timer: Enter a value for the PING accelerated timer in seconds.
5.
Fail Count: Enter a fail count.
6.
Force reset every: Enter a value to force a reset in minutes.
Once you’ve completed your settings, click on ‘Save’ to store them.
Page 32 / 44
MyZone User Guide
YML24W-RAU
32
www.netcomm.com.au
4.5. System
This section allows you to configure System level parameters such as logs, administration, logoff and rebooting your MyZone.
4.5.1. Log
This section allows you to view your System logs. You can view all the logs or filter them from the drop down box.
4.5.2. Administration
This section allows you to enable remote administration and change your ‘admin’ level password.
1.
Remote Adminstration: Click ‘enable’ to turn on remote administration
2.
Remote Administration Port: Enter the port number that you want to enable for remote administration.
3.
Admin Password: Enter a new admin password in this field to change it.
4.
Confirm Password: Re-enter the new password to confirm.
Once you’ve completed your settings, click on ‘Save’ to store them.
Page 33 / 44
YML24W-RAU
MyZone User Guide
www.netcomm.com.au
33
NETCOMM LIBERTY SERIES
- MyZone Mobile 3G WiFi Router
4.5.3. Logoff
To log out of your MyZone at any point, click on the Logoff tab under System. Once you’ve logged off you will need to re-enter your username and password
to log back in.
4.5.4. Reboot
This section allows you to reboot your MyZone. Please note that it will take approximate 90 seconds for your MyZone to come back live. Also, any settings
you haven’t saved will be lost.
Before the reboot initialises you will be asked to confirm your action.
To proceed, click on the ‘OK’ button.
Page 34 / 44
Troubleshooting
Page 35 / 44
YML24W-RAU
MyZone User Guide
www.netcomm.com.au
35
NETCOMM LIBERTY SERIES
- MyZone Mobile 3G WiFi Router
Troubleshooting
Are you having trouble connecting wirelessly?
1.
Make sure that the Wi-Fi device you are using to connect to the MyZone is turned ON. For example, most laptops have a manual Wi-Fi ON/OFF
button that is typically located to the front or the side of the laptop, depending on the brand.
2.
Ensure that the MyZone is turned ON and that the Wi-Fi LED is blinking (working on battery) or steady (charging).
3.
Search for Wireless Network ‘NetComm MyZone’ and make sure you enter the right password which is ‘password.’
4.
Make sure DHCP is turned ON correctly on your Wi-Fi device.
Are you having trouble accessing the Internet?
5.
Make sure the SIM is inserted correctly. Check the SIM direction on the left side of the MyZone for reference.
6.
Check to ensure that the 3G LED is blinking correctly. Refer to the table on ‘Deciphering the Blinking Coloured Lights.’
7.
If you are using a Prepaid SIM, make sure that the SIM carries sufficient credit.
8.
If you are using a SIM from a service provider in Australia, the Auto APN feature should pick up the network automatically. (Access Point Name) you
will have to manually enter the APN in the MyZone Manager. If you don’t know the APN, please contact your mobile service provider or check the
selection of APN’s listed at www.netcomm.com.au/myzone.
19216811.live