www.netcomm.com.au

41

TELSTRA ULTIMATE GATEWAY –

3G42WT – DC-HSPA+ 42Mbps Wi-Fi Router

NetComm 3G42WT – DC-HSPA+ 42Mbps Wi-Fi Router

YML42T

Appendix A: Print Server

These steps explain the procedure for enabling the Print Server.

1.

Select “Print Server” from the Advanced Settings menu in the Web User Interface.

2.

Select the Enable on-board print server checkbox and enter the Printer name and the Make/ model

Please note: The Printer name can be any text string up to 40 characters. The Make and model can be any text string up to

128 characters.

For Windows Vista/7

These steps explain the procedure for enabling the Printer Server.

1.

After enabling the Print Server function and entering your printer Make and model, Go to the control panel, and select

‘Printers’ if you are using Windows Vista or select “Devices and Printers” if you are using Windows 7.

2.

Once in the ‘Printers’ page, click the ‘Add a printer’ button as shown below.

42

NetComm 3G42WT – DC-HSPA+ 42Mbps Wi-Fi Router

YML42T

www.netcomm.com.au

3.

Select ‘Add a network, wireless or bluetooth printer’.

4.

Click on the radio-button labelled ‘Select a shared printer by name’, and type “http://10.0.0.138:631/printers/samsung” in

the box below. Click ‘Next’.

Please note: The PrinterName must be the same as the printer name entered into the Printer section of the Web User

Interface.

5.

Next, select the driver that came with your printer. Browse through the list to select your printer driver, or click ‘Have Disk’ if

you have your printer driver installation media.

6.

Choose whether you want this printer to be the default printer, and then click ‘Next’.

7.

Click ‘Finish’. Your device is now configured and ready for use.

www.netcomm.com.au

43

TELSTRA ULTIMATE GATEWAY –

3G42WT – DC-HSPA+ 42Mbps Wi-Fi Router

NetComm 3G42WT – DC-HSPA+ 42Mbps Wi-Fi Router

YML42T

For MAC OSX

1.

After enabling the Print Server function and entering your printer Make and model, click the Apple menu, select System

Preferences. In the System Preference menu click on the Print & Fax.

2.

Add your printer by clicking the “+” button in the Print & Fax preferences window.

3.

Mouse over to the Protocol drop down list and select Internet Printing Protocol – IPP.

4.

Input the Address field with “10.0.0.138:631” and the Queue with “/printers/PrinterName”

Please note: The PrinterName must be the same as the printer name entered into the Printer section of the Web User

Interface.

44

NetComm 3G42WT – DC-HSPA+ 42Mbps Wi-Fi Router

YML42T

www.netcomm.com.au

5.

From the Print Using drop down list, select your corresponding printer driver.

6.

Click Add and check the printer status.

7.

Your device is now configured and ready for use.

www.netcomm.com.au

45

TELSTRA ULTIMATE GATEWAY –

3G42WT – DC-HSPA+ 42Mbps Wi-Fi Router

NetComm 3G42WT – DC-HSPA+ 42Mbps Wi-Fi Router

YML42T

Appendix B: USB Storage

For Windows Vista/7

1.

Open a web-browser (such as internet Explorer, Firefox or Safari)

2.

Type in the address \\ “NetbiosName”\ “DirectoryName” \

(eg \\Telstra42 \USB-Storage)

Please note: There are no username and password required to access the USB drive, the user will be able to read/write

the folder/files in the USB drive.

For MAC OSX

1.

Click the Finder icon in the Dock.

2.

Choose Connect to Server from the Go menu.

3.

In the address field of the Connect to Server dialog, type in the URL Smb:// “NetbiosName”/“DirectioryName”

(eg

Smb://Telstra42/USB-Storage) )

4.

Click Connect to connect your USB driver.