Page 46 / 52
Scroll up to view Page 41 - 45
HSPA+ 42Mbps WiFi Router User Guide
YML42
46
www.netcomm.com.au
10.5 Route
Select Route to display the network routes configured on the Router has found.
10.6 ARP
Click ARP to display the ARP information.
10.7 DHCP
Click DHCP to display the DHCP information.
10.8 PING
Check a connection by entering the IP address
Page 48 / 52
HSPA+ 42Mbps WiFi Router User Guide
YML42
48
www.netcomm.com.au
11 Appendix A: Print Server
These steps explain the procedure for enabling the Print Server.
1 .
Select “Print Server” from the Advanced Settings menu in the Web User Interface.
Select the Enable on-board print server checkbox and enter the Printer name and the Make/ model
NOTE: The Printer name can be any text string up to 40 characters. The Make and model can be any text string up to 128 characters.
11.1 For Windows Vista/7
These steps explain the procedure for enabling the Printer Server.
1 .
Go to the control panel, and select ‘Printers’ if you are using Windows Vista or select “Devices and Printers” if you are using
Windows 7.
Once in the ‘Printers’ page, click the ‘Add a printer’ button as shown below.
2 .
Select ‘Add a network, wireless or bluetooth printer’
Page 49 / 52
YML42
HSPA+ 42Mbps WiFi Router User Guide
www.netcomm.com.au
49
NETCOMM LIBERTY™ SERIES
- HSPA+ 42Mbps WiFi Router
3 .
Click on the radio-button labelled ‘Select a shared printer by name’, and type
NOTE: The PrinterName must be the same as the printer name entered into the Printer section of BB@work’s user interface.
4 .
Next, select the driver that came with your printer. Browse through the list to select your printer driver, or click ‘Have Disk’ if you
have your printer driver installation media.
5 .
Choose whether you want this printer to be the default printer, and then click ‘Next’.
6 .
Click ‘Finish’. Your device is now configured and ready for use.
Page 50 / 52
HSPA+ 42Mbps WiFi Router User Guide
YML42
50
www.netcomm.com.au
11.2 For MAC OSX
These steps explain the procedure for enabling the Printer Server.
1 .
Click on the Apple menu, select System Preferences.
2 .
In the System Preference menu click on the Print & Fax.
3 .
Click the + button to add your printer.
4 .
Mouseover to the Protocol drop down list and select Internet Printing Protocol – IPP
5 .
In the Address field, type “192.168.1.1:631”
6 .
In the Queue field, type “/printers/{PrinterName}”
NOTE: {PrinterName} must be the same as the printer name entered into the Printer section of the BB@work’s user interface.
7 .
From the Print Using drop down list, select your corresponding printer driver.
8 .
Click Add and check the printer status.
19216811.live