1. Home
    2. /
  2. Manuals
    3. /
  3. MSI
    4. /
  4. RG54GS2
    5. /
  5. 4
Page 16 / 94 Scroll up to view Page 11 - 15
11
4.3.1 IP Setting
–
WAN Type, IP Mode
Press
“
Change
”
This option is primary to enable this product to work properly. The setting items and the web appearance depend on
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 94
12
the WAN type. Choose correct WAN type before you start.
1.
LAN IP Address
:
the local IP address of this device. The computers on your network must use the LAN IP
address of your product as their Default Gateway. You can change it if necessary.
2.
WAN Type
: WAN connection type of your ISP. You can click
Change
button to choose a correct one from the
following four options:
A.
Static IP Address: ISP assigns you a static IP address.
B.
Dynamic IP Address: Obtain an IP address from ISP automatically.
C.
Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)
D.
PPP over Ethernet: Some ISPs require the use of
PPPoE to connect to their services.
E.
PPTP: Some ISPs require the use of
PPTP to connect to their services.
F.
L2TP: Some ISPs require the use of
L2TP to connect to their services
4.3.1.1 Static IP Address
WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting provided by your
ISP.
4.3.1.2 Dynamic IP Address
1.
Host Name: optional. Required by some ISPs, for example, @Home.
2.
Renew IP Forever: this feature enables this product to renew your IP address automatically when the lease time
is expiring-- even when the system is idle.
4.3.1.3 Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)
1.
LAN IP Address is the IP address of this product. It must be the default gateway of your
computers.
2.
WAN Type is Dynamic IP Address. If the WAN type is not correct, change it!
3.
Host Name: optional. Required by some ISPs, e.g. @Home.
4.
Renew IP Forever: this feature enable this product renew IP address automatically when the lease time is
being expired even the system is in idle state.
4.3.1.4 PPP over Ethernet
1.
PPPoE Account and Password: the account and password your ISP assigned to you. For security,
this field appears blank. If you don't want to change the password, leave it empty.
2.
PPPoE Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave
it blank.
3.
Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE session.
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 94
13
Set it to zero or enable Auto-reconnect to disable this feature.
4.
Maximum Transmission Unit (MTU)
: Most ISP offers MTU value to users. The most common MTU value is
1492.
5.
Connection Control:There are 3 modes to select:
Connect-on-demand:The device will
link up with ISP when the clients send outgoing packets.
Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established.
Manually:The device will not make the link until someone clicks the connect-button in the Staus-page.
4.3.1.5 PPTP
1.
My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned
to you.
2.
Server IP Address: the IP address of the PPTP server.
3.
PPTP Account and Password: the account and password your ISP assigned to you. If you don't
want to change the password, keep it empty.
3.
Connection ID: optional. Input the connection ID if your ISP requires it.
4.
Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or
enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will
connect to ISP automatically, after system is restarted or connection is dropped.
5.
Connection Control:There are 3 modes to select:
Connect-on-demand:The device will
link up with ISP when the clients send outgoing packets.
Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established.
Manually:The device will not make the link until someone clicks the connect-button in the Staus-page.
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 94
14
4.3.1.6 L2TP
First,Please check your ISP assigned and Select Static IP Address or Dynamic IP Address.
For example:Use Static
1.
My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned
to you.
2.
Server IP Address: the IP address of the PPTP server.
3.
PPTP Account and Password: the account and password your ISP assigned to you. If you don't
want to change the password, keep it empty.
3.
Connection ID: optional. Input the connection ID if your ISP requires it.
4.
Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or
enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will
connect to ISP automatically, after system is restarted or connection is dropped.
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 94
15
6.
Connection Control:There are 3 modes to select:
Connect-on-demand:The device will
link up with ISP when the clients send outgoing packets.
Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established.
Manually:The device will not make the link until someone clicks the connect-button in the Staus-page.
4.3.2 Wireless Setting, and 802.1X setting
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular MSI Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top